Cassette air conditioning Ballu how to remove error codes
Error code | Description of errors | Display display | |||
High Power | Operation | Timer | Power | ||
one | Affected or cut off air temperature sensor | ||||
2 | The evaporator temperature sensor is shorted or clouded | ||||
3 | Frost evaporator | ||||
6 | Problems with power supply | ||||
7 | Compressor overload | ||||
eight | Fan engine does not spin | ||||
thirteen | Memory Microcircuit Error on Place |
Description of errors | Display display | |||
Timer Lamp | RUNNING LAMP (BLUE) | Running Lamp (Red) | Power Lamp | |
The problem of air temperature sensor | ||||
The evaporator temperature sensor is shorted or clouded | ||||
Frost evaporator | ||||
Overheating of the evaporator | ||||
No connection between internal and external blocks | ||||
Nutrition problems | ||||
Compressor overload | ||||
Fault fan engine fault | ||||
Fault of the temperature sensor of the external block | ||||
Condensor sensor malfunction | ||||
Overloading the entire system | ||||
No load, compressor break | ||||
Power Voltage Problem | ||||
Overload of the external block when cooling | ||||
Ottay mode | ||||
Fault inverter module | ||||
Memory chip malfunction on the board of an external block |
Inverter errors Ballu air conditioners
AIR CONDITIONED Troubleshooting E4,E5,E6,F1,F2,F3 Error Codes. Hindi
Error code | Description of the accident | Cause of malfunction |
Internal block | ||
one | Room temperature sensor is faulty | The thermistor is closed or open. |
2 | The heat exchanger temperature sensor is faulty | The thermistor is closed or open. |
3 | Heat exchanger frozen | |
4 | Heat exchanger overheating | |
5 | Communication problem | |
eight | The problem with the inner fan | |
External block | ||
one | Outdoor air temperature sensor is faulty | The thermistor is closed or open. |
2 | Faulty outdoor heat exchanger temperature sensor | The thermistor is closed or open. |
3 | Compressor overheated | The thermistor is closed or closed, or the compressor overheated |
4 | External capillary tube Temperature sensor is faulty | The thermistor is closed or open. |
5 | The temperature sensor of the outdoor capillary tube in faulty | The thermistor is closed or open. |
6 | Overgright | Too big electric current in the outer block. |
7 | No download | The compressor is not connected or the module is damaged. |
eight | Low voltage | Too high or too low supply voltage. |
nine | Power interruption | |
ten | Overload in the outer block in the cooling cycle | |
eleven | Defrost | |
12 | IPM power module malfunction | |
thirteen | Invalid EEPROM data outdoor outdoor unit | |
fourteen | Outdoor air circulation temperature sensor is faulty | |
fifteen | IPM power module overheated |
Bought a convector. turned on. not heats
Bought a convector. turned on. not heats!
Good afternoon! Yesterday, on request XC 300277 acquired the Timberk Tec convector.PS1 PGE 1000 IN (1 pc.). Delivery did not order. Give, I think, Ince myself to the house. Dotted. pleaseply turn it on. the dashboard works, and the convector does not heat! And where is the promised express heating, if in 30 minutes the convector did not even become a little warm?And what should I do now? Drag you this convector back?And then go for exchange and again everything is new? I am very unhappy! Please exchange me a convector for a working work and make me delivery for your account. Statements, what are needed, I am ready to write and fill out now, so as not to waste time in your store on the signing of unnecessary pieces of paper. This is not my fault that I was slipped by the defective goods and did not give it to check in the store, under the pretext that “how to check such a convector”. Tomorrow from 9 to 14 o’clock I expect shipping chairs on request COXC-208055. I can transfer you a faulty convector.
Error codes and elimination
As an example, you can get acquainted with the instructions for the Ballu MFS2-24 model (AR MFS2-24 AR). It is suitable for other air conditioners like this type.
Along with the transfer of faults and recommendations to eliminate them, a table with codes and clarifications. They are not so much. we suggest familiarizing yourself with them further:
Judging by the specified ways to eliminate, not with all the faults you can cope with our own. often you have to contact the service center
Some craftsmen are trying to solve the problem independently, but to get a positive result, you need to have technical education and relevant skills.
In addition, it is better to deal with independent repairs after the warranty period is over.
Ballu air conditioner error codes
E1, E2, E3, E4. Temperature sensor (internal or external block, condenser temperature, evaporator temperature) is shorted or broken.
E8. Vodked electrostatic filter
P4. Error evaporator sensor, too low / high temperature (compressor automatically turns off)
P5. Condenser sensor error, too low / high temperature (compressor automatically turns off)
P6. Defrost temperature or internal heat exchanger delay
E1. Internal air temperature sensor error
E2. Evaporator temperature sensor error
The E5 system entered the protection mode by error of the outdoor unit
E6. Error of the engine of the fan of the indoor unit
E1, E2, E3, E4. Temperature sensor (internal or external block, condenser temperature, evaporator temperature) is shorted or broken.

E8. Vodked electrostatic filter
P4. Error evaporator sensor, too low / high temperature (compressor automatically turns off)
P5. Condenser sensor error, too low / high temperature (compressor automatically turns off)
P6. Defrost temperature or internal heat exchanger delay
E1. Internal air temperature sensor error
E2. Evaporator temperature sensor error
The E5 system entered the protection mode by error of the outdoor unit
E6. Internal block fan engine error
Description of the error code LED on the Display panel on the digital display
BCal 3-Phase Models BCFA and BDA 3-Phase Models
The error of switching internal and outdoor blocks 5 flashes. breaking 2 seconds. F1
Wired remote control error. E5
Error in the drainage system 4 outbreaks. Break 2 seconds. E4
Protecting outdoor block. Error sequence of phases 6 flashes. breaking 2 seconds. E6
Protecting outdoor block. High injection temperature (condensation) 10 outbreaks. Break 2 sec EA
Protecting outdoor block. High pressure sensor triggered 9 flashes. Break 2 seconds. E9
Protecting outdoor block. Low pressure sensor triggered 9 flashes. Break 2 seconds. E9
Open or close a spice air temperature sensor 1 of the indoor unit, flashing with a frequency of 2 seconds. E1
Open or short circuit temperature sensor 3 internal block. 2 seconds. E3

Open or short circuit temperature sensor outdoor flash 2 flash. Open 2 sec E2
Open or short circuit air temperature sensor outdoor unit 7 flashes. Break 2 seconds. E7
Open or short circuit temperature sensor outdoor unit 8 flashes. breaking 2 seconds. E8
Insufficient amount of freon in the system. 11 outbreaks. Break 2 seconds
Installing air conditioners. Installing air conditioners with our help will not prevent your daily life or work activity. Your part will not require any participation, except, of course, sincere joy from the result obtained.
Maintenance of air conditioning technicians, followed by, will serve much longer than that which you do not pay attention to. That is why we recommend providing permanent service of air conditioners. Conducting full or partial diagnostics of climate equipment guarantees its uninterrupted work for a long time.
Choose good climatic equipment is not as easy as it may seem. You must definitely understand what exactly you want: get rid of the summer heat or turn the room where most often lived, in a real paradise corner with its microclimate and comfortable temperature. Before you buy air conditioners, consult our experts, they will help to choose the most optimal option for climate techniques.
Errors air conditioners Ballu
E1, E2, E3, E4. The temperature sensor (internal or outdoor unit, the temperature of the condenser, the temperature of the evaporator) is shorted or climbed
E6. worked out the protection of the external block
E8. Elektostatic filter is scored
P4. Error on the evaporator sensor, too low / high temperature (the compressor automatically turns off)
P5. a condenser sensor error, too low / high temperature (the compressor automatically turns off)
P6. Turning or delay mode turned on internal heat exchanger temperature
EA. Flare firmware, faulty EEPROM (determined by experienced, replacing the ROM chip with the firmware error removed)
E1.Internal air temperature sensor error
E2.evaporator temperature sensor error
E5.The system entered the protection mode by error of the outdoor unit
E6.Error Engine Fan Inner Block
Do not delay, call number 7 (495) 920 98 00 Order repair of the air conditioner now and your air conditioner will last longer!
Errors air conditioners Ballu
E1, E2, E3, E4. The temperature sensor (internal or outdoor unit, the temperature of the condenser, the temperature of the evaporator) is shorted or climbed
E6. worked out the protection of the external block
E8. Elektostatic filter is scored
P4. Error on the evaporator sensor, too low / high temperature (the compressor automatically turns off)
P5. a condenser sensor error, too low / high temperature (the compressor automatically turns off)
P6. Turning or delay mode turned on internal heat exchanger temperature
EA. Flare firmware, faulty EEPROM (determined by experienced, replacing the ROM chip with the firmware error removed)
E1.Internal air temperature sensor error
E2.evaporator temperature sensor error
E5.The system entered the protection mode by error of the outdoor unit
E6.Error Engine Fan Inner Block
Do not delay, call number 7 (495) 920 98 00 Order repair of the air conditioner now and your air conditioner will last longer!