Refrigerator Electrolux temperature adjustment

If the temperature in the refrigerator is set incorrectly, this can lead not only to poor storage of products, but also to a short life of the motor of the refrigerator itself. From this article you will find out what temperature should be in the refrigerator and freezer, as well as how to properly adjust the temperature in the refrigerator.

Properly set temperature is one of the most important indications for maintaining the good functioning of the refrigerator. If from the very first day of the unit to set the right number of degrees, this will extend the life lifespan for several years.

Old models of refrigerators had only 2 modes: working and not working. Modern types of units suggest more functions.

Why is it important to maintain the required temperature inside the refrigerator? Most of the products that are in the refrigerator should be stored in conditions of 2 5ºС. Such a number of degrees will allow them to remain fresh for a long time. If the unit cools more, then the products will freeze and lose their taste properties or texture. And if the refrigerator is warmer than the necessary, there is a chance to spoil its contents, t.to. Pathogenic bacteria begin to multiply over 5ºС, as a result of which mold or rot may appear on the products.

Freezer also requires a certain temperature setting. For the most part, those products that should be frozen are stored in it. ice, vegetables, fish and meat. If in this part of the refrigerator it is not cold enough, water will regularly accumulate around the unit. melted ice, and if it lasts a long time, the products may even deteriorate. An incorrect refrigerator also consumes more electricity, which leads to even greater losses.

Therefore, it is very important to set the temperature correctly.

Types of regulators

It is not difficult to configure the desired temperature in the refrigerator. In order for everyone to do it independently, manufacturers provide a special mechanism.

By the type of control, it is divided into 2 types: electronic and mechanical.

The electronic regulator can be recognized by finding the scoreboard on the refrigerator housing. Most often it is located above the door of the upper chamber, but can be on the door. To install the required temperature near the scorelies, buttons are provided, or on expensive models it can be sensory.

The mechanical regulator is a rotary disk that can be twisted or smaller. The turn clockwise makes the temperature in the refrigerator below, there are also numbers around the disk showing the level of engine work for cooling.

Types of regulators

It is not difficult to configure the desired temperature in the refrigerator. In order for everyone to do it independently, manufacturers provide a special mechanism.

By the type of control, it is divided into 2 types: electronic and mechanical.

The electronic regulator can be recognized by finding the scoreboard on the refrigerator housing. Most often it is located above the door of the upper chamber, but can be on the door. To install the required temperature near the scorelies, buttons are provided, or on expensive models it can be sensory.

The mechanical regulator is a rotary disk that can be twisted or smaller. The turn clockwise makes the temperature in the refrigerator below, there are also numbers around the disk showing the level of engine work for cooling.

Digital designation on the regulator

On an electronic board 1 pressing the button corresponds to an increase or decrease in temperature by 1 degree. You can only set the number of degrees provided by manufacturers. For example, without even knowing the correct temperature for products, you cannot install 10ºС, the factory settings of the refrigerator allow you to put from 2 to 8ºС. The current temperature in the refrigerator is indicated on the scoreboard.

electrolux, refrigerator, temperature

With a mechanical type of regulation around the disk there are also digital designations, but they indicate not the number of degrees, but the mode. The higher the number, the stronger the refrigerator engine works.

But you should not put the regulator in the maximum position, because the work of the motor at full power will create too much cold in the chamber, electricity consumption will grow. In addition, there will be more engine wear, which is why the refrigerator can last less proper term.

Instructions and guidance for Electrolux Ere 3900 in Russian

21 page of detailed instructions and user manuals

Air humidifier Ecobiocomplex Electrolux EHU-3810D Yogahealthline Review-Senya Miro

Ultrasonic air humidifier Electrolux EHU-3710D

Overview of the oven Electrolux Intuit 600 OED5H70X

Electrolux Erb 3808 refrigerator, freezing freezer loses

Disadvantages of the Moisturizer Electrolux EHU-3815D Yogahealthline.

Moisturizer Review Electrolux EHU 3815D

electrolux, refrigerator, temperature

Operating instructions refrigerator.

Operation safety instructions

Your new refrigerator can have functions that have not been in your previous one of the chills. Therefore, this instruction should be carefully familiarized with. The instructions are to be preserved in order to use it later or transferred to the merciful new owner of the refrigerator.These warnings are given for your safety. Be sure to read it before installing or using the device. Your safety is very important for us.If you doubt whether you understand the above recommendations correctly, call us an in-information fishing line for the Electrolux trimmer: (095) 937-78-37.

storage of food in normal conditions in accordance with the Snow Instructions.

Both in the refrigerator and in the freezer

the department should not be stored in the explosive gases or liquids, as the way can lead to injuries to the property of property.

To located inside and in the rear

The refrigerator details of the cooling system should touch sharp objects. The refrigerator will be damaged by the fridge in the system of the occurrence of holes in the system.cooping.

In the freezer department should not be stored

carbonated drinks or bottles with dullness. Glass bottles may swear.

The refrigerator has significant weight. The edges

hulls or protruding parts can be used by sharp. When moving the colder, you should observe the curely and use the protective materials.

regulators and internal details.

Remove the fork from the outlet and cut the cable education as close to the rear paneling. Make sure that all.offs and latches were removed from the refrigerator by the hooking of accidents with small. It is best to remove the door completely.Try not to damage the refrigerator system coolation. Isolation of the cooling and cooling system may contain materials that are retailed for the ozone shell.For the same reason, the refrigerator will follow the corresponding disposal point (add. Information can be obtained at the local administration).

Setting temperature in the refrigerator using a digital keyboard

In refrigerators with mechanical control, wheels or handles with digital designations are installed (range from 1 to 7). The figure does not show degrees, it denotes position number. 1. denotes a minimum flow of cold air, 7. maximum. Usually the disk rotates clockwise.

How to Set Up Your Single-Door Freezer

On the electronic regulator, the temperature regime is set using a button. It is set by pressing the temperature range programmed by the manufacturer or the desired. One press increases the value by 1 °. Degrees are set in the range from 2 to 8 ° C.

Advice. Do not set the highest digital values, as this leads to a long and continuous operation of the compressor. This will lead to increased energy consumption and can cause its breakdown.

What is the optimum temperature in the refrigerator and freezer

The refrigerator has a large volume, so the heat in it is distributed unevenly. It depends on the design device of the device, the location of the compressor. The closer to the flow of cold air (compressor), the colder.

Depending on the models, the coldest place is either the middle or upper shelf of the refrigerator. The maximum temperature inside the main chamber is from 6 to 8 ° C, the optimal one is from 2 to 5 ° C.

Attention! The door is the warmest part of the refrigerator, so perishable products are not stored in it.

So that the products maintain freshness longer, they are properly distributed over the refrigerator. They take into account that:

So that the established temperature regime is preserved in household appliances, the following rules follow:

Temperature control instructions in Electrolux refrigerators

You can familiarize yourself with the instructions for many models of Electrolux refrigerators by the link-https: // mnogo-dok.ru/Instrukci/Sendwalues/Type/Largeby/refrigerators/Electrolux/

How to adjust the temperature in the refrigerator Electrolux en 3854 Now

To adjust the temperature, use the temperature control key. With each click on the key, the specified temperature changes to one value; In this case, the corresponding LED indicator lights up. By clicking on the temperature control key, achieve the installation of the required temperature. The setting will be completed.

The choice of temperature is performed sequentially from 2 ° C to 8 ° C

Select the setting, given that the temperature inside the device depends on:

How to adjust the temperature in the refrigerator Electrolux ER 9098 BSAN

In the case of measuring the temperature inside the refrigerator, a conventional thermometer should be put in a glass of water in the center of the refrigerator.

In this case, the temperature he showed most corresponds to the temperature of the products stored in the refrigerator. The thermometer should not be suspended or put on the shelf.

  • Products should be laid out in the refrigerator separately from each other so that the air can freely circulate between them.
  • Products should not touch the cooling panel in the rear wall of the refrigerator, as they can freeze.
  • In no case do not put warm foods in the refrigerator. Products must first cool to room temperature.
  • All products must be properly packed in order to avoid the transfer of tastes and smells.

Set the temperature control to the desired position.

After setting the temperature, the freezer should be allowed to work within a day, so that the temperature has time to balance.

In order for the products to be stored as long as possible, the temperature inside the freezer should be.18 ° C or below. Please note that as the temperature decreases, the consumption of power increases.

If the temperature in the freezer rises higher.12 ° C, a red warning indicator lights up. The red signal bulb will go out when the temperature inside the freezer drops below.13 ° C.

How to adjust the temperature in the refrigerator Electrolux ERB39300 X

The temperature is installed using the button (D) to select the refrigerator camera and button (B) directly to set the temperature.

When you press the button (c) on the indicator, the current set temperature flashes. To confirm the temperature settings, press the button (e).

A sound signal will be heard, and a new set temperature value will appear on the display for several seconds, and then the current temperature value in the refrigerator chamber will be shown.

The newly set temperature should be achieved within 24 hours. After a long period during which the refrigerator was not used, there is no need to re.set the temperature, since it remains in the memory of the device.

During the period of stabilization of the temperature after the first turning on the device, the temperature displayed on the display may not correspond to the given temperature.

The temperature can be changed from 2 ° C to 8 ° C.

During normal operation, the indicator shows the temperature in the refrigerator.

Attention! Displayed and set temperatures may differ. This is normal, especially if:

The temperature setting change was recently done.

For a long time the refrigerator door was opened.

Warm food was placed in the refrigerator.

How to adjust the temperature in the refrigerator Electrolux Ere 3950 W

The temperature can be adjusted by pressing the button (c). The current temperature value will flash, and by pressing the button (B), you can change the set temperature with a step of one degree. The set temperature in the refrigerator will reappear on the display after a few seconds. The set temperature will be achieved within 24 hours.

IMPORTANT! When starting the device, the temperature on the display does not correspond to the set temperature, this continues until the moment of stabilization (within 24 hours).

The temperature in this compartment can be adjusted in the range from 2 ° C to 8 ° C.

With normal functioning, the indicator displays the temperature inside the refrigerator.

How to adjust the temperature in the refrigerator Electrolux Ern 2201 Fow

The temperature is adjusted automatically. To bring the device into effect, perform the following operations:

  • Turn the temperature controller towards the lower positions to install the minimum cold.
  • Turn the temperature controller towards the upper positions to set the maximum cold.

In general, the most preferable is the average temperature value.

However, the exact set temperature should be selected taking into account the fact that the temperature inside the device depends on:

In the case of high temperature in the room or complete filling of the device with products, if the lowest temperature value is set, the compressor of the device can work continuously; In this case, the back wall of the device will be covered with ice. In this case, you should set a higher temperature to make it possible to automatically defrost and, thus, reduce energy consumption.

Optimum temperature in Electrolux refrigerators

Electrolux refrigerator has a basic average temperature for a cold cabinet 2-3 0 C. It is believed, the closer to the zero temperature, the longer the safety period of the products. Electrolux was the first to unite products such as fresh meat and fish into a freshness zone, with a temperature of 1-2 0 s, created a partition between a dry and wet compartment. On shelves for storing other dairy, meat finished products, a temperature has been created up to 5 0 with. The top is given for culinary homework, dinners. They do not need to be stored for a long time.

What temperature is chosen in the freezer of the Electrolux refrigerator depends on the class of the product. If a small compartment is built into the cold chamber, the temperature will be minus 6-12 degrees, it is determined by the number of stars in the marking. The small volume of frozen products is eaten quickly, it makes no sense to increase energy consumption for storage. Budget models of Electrolux refrigerators include mechanical temperature control in three positions: Max, Medium, Min. The manufacturer recommends using extreme modes in exceptional circumstances. The temperature should be on the base position. Then the Electrolux refrigerator will be able to work without breakdowns for decades. What a savings!

If the refrigerator is two.chamber, most Electrolux models are designed for a separate regulation by compartments. The freezer has a standard temperature from.6 before.26 0 s. For quick freezing, shock mode is provided. This will instantly freeze fruits, preserving the entire complex of useful elements. You can store them at 8-10 degrees.

In all the cells of the freezer, the temperature is the same. Which one can be found using a special thermometer. Studies have shown that most dangerous microorganisms are destroyed during.18 0 s, this temperature is taken as the basic for modern freezers of Electrolux refrigerators.

Modern premium refrigerators from Electrolux become more difficult. Inverter compressor allows you to use an economical mode without launch loads. Electronic temperature regulation and several sensors create the conditions for creating a climate on each shelf of a refrigerator. The control function receives remote access from the smartphone, according to the program.

The storage temperature must meet the requirements on the label of a perishable product. Therefore, dairy products and sausages are stored at 2-3 0 s, fats, cheese, oil up to 5 0, and home dinners on the upper shelves of the refrigerator. The door shelves are far from the evaporator and the highest temperature zone is on them.

Temperature control instructions in Electrolux refrigerators

You can familiarize yourself with the instructions for many models of Electrolux refrigerators by the link-https: // mnogo-dok.ru/Instrukci/Sendwalues/Type/Largeby/refrigerators/Electrolux/

How to adjust the temperature in the refrigerator Electrolux en 3854 Now

To adjust the temperature, use the temperature control key. With each click on the key, the specified temperature changes to one value; In this case, the corresponding LED indicator lights up. By clicking on the temperature control key, achieve the installation of the required temperature. The setting will be completed.

The choice of temperature is performed sequentially from 2 ° C to 8 ° C

Select the setting, given that the temperature inside the device depends on:

How to adjust the temperature in the refrigerator Electrolux ER 9098 BSAN

In the case of measuring the temperature inside the refrigerator, a conventional thermometer should be put in a glass of water in the center of the refrigerator.

In this case, the temperature he showed most corresponds to the temperature of the products stored in the refrigerator. The thermometer should not be suspended or put on the shelf.

  • Products should be laid out in the refrigerator separately from each other so that the air can freely circulate between them.
  • Products should not touch the cooling panel in the rear wall of the refrigerator, as they can freeze.
  • In no case do not put warm foods in the refrigerator. Products must first cool to room temperature.
  • All products must be properly packed in order to avoid the transfer of tastes and smells.

Set the temperature control to the desired position.

After setting the temperature, the freezer should be allowed to work within a day, so that the temperature has time to balance.

In order for the products to be stored as long as possible, the temperature inside the freezer should be.18 ° C or below. Please note that as the temperature decreases, the consumption of power increases.

If the temperature in the freezer rises higher.12 ° C, a red warning indicator lights up. The red signal bulb will go out when the temperature inside the freezer drops below.13 ° C.

How to adjust the temperature in the refrigerator Electrolux ERB39300 X

The temperature is installed using the button (D) to select the refrigerator camera and button (B) directly to set the temperature.

When you press the button (c) on the indicator, the current set temperature flashes. To confirm the temperature settings, press the button (e).

A sound signal will be heard, and a new set temperature value will appear on the display for several seconds, and then the current temperature value in the refrigerator chamber will be shown.

The newly set temperature should be achieved within 24 hours. After a long period during which the refrigerator was not used, there is no need to re.set the temperature, since it remains in the memory of the device.

During the period of stabilization of the temperature after the first turning on the device, the temperature displayed on the display may not correspond to the given temperature.

The temperature can be changed from 2 ° C to 8 ° C.

During normal operation, the indicator shows the temperature in the refrigerator.

Attention! Displayed and set temperatures may differ. This is normal, especially if:

The temperature setting change was recently done.

For a long time the refrigerator door was opened.

Warm food was placed in the refrigerator.

How to adjust the temperature in the refrigerator Electrolux Ere 3950 W

The temperature can be adjusted by pressing the button (c). The current temperature value will flash, and by pressing the button (B), you can change the set temperature with a step of one degree. The set temperature in the refrigerator will reappear on the display after a few seconds. The set temperature will be achieved within 24 hours.

IMPORTANT! When starting the device, the temperature on the display does not correspond to the set temperature, this continues until the moment of stabilization (within 24 hours).

The temperature in this compartment can be adjusted in the range from 2 ° C to 8 ° C.

With normal functioning, the indicator displays the temperature inside the refrigerator.

How to adjust the temperature in the refrigerator Electrolux Ern 2201 Fow

The temperature is adjusted automatically. To bring the device into effect, perform the following operations:

electrolux, refrigerator, temperature
  • Turn the temperature controller towards the lower positions to install the minimum cold.
  • Turn the temperature controller towards the upper positions to set the maximum cold.

In general, the most preferable is the average temperature value.

However, the exact set temperature should be selected taking into account the fact that the temperature inside the device depends on:

In the case of high temperature in the room or complete filling of the device with products, if the lowest temperature value is set, the compressor of the device can work continuously; In this case, the back wall of the device will be covered with ice. In this case, you should set a higher temperature to make it possible to automatically defrost and, thus, reduce energy consumption.

Optimum temperature in Electrolux refrigerators

Electrolux refrigerator has a basic average temperature for a cold cabinet 2-3 0 C. It is believed, the closer to the zero temperature, the longer the safety period of the products. Electrolux was the first to unite products such as fresh meat and fish into a freshness zone, with a temperature of 1-2 0 s, created a partition between a dry and wet compartment. On shelves for storing other dairy, meat finished products, a temperature has been created up to 5 0 with. The top is given for culinary homework, dinners. They do not need to be stored for a long time.

What temperature is chosen in the freezer of the Electrolux refrigerator depends on the class of the product. If a small compartment is built into the cold chamber, the temperature will be minus 6-12 degrees, it is determined by the number of stars in the marking. The small volume of frozen products is eaten quickly, it makes no sense to increase energy consumption for storage. Budget models of Electrolux refrigerators include mechanical temperature control in three positions: Max, Medium, Min. The manufacturer recommends using extreme modes in exceptional circumstances. The temperature should be on the base position. Then the Electrolux refrigerator will be able to work without breakdowns for decades. What a savings!

If the refrigerator is two.chamber, most Electrolux models are designed for a separate regulation by compartments. The freezer has a standard temperature from.6 before.26 0 s. For quick freezing, shock mode is provided. This will instantly freeze fruits, preserving the entire complex of useful elements. You can store them at 8-10 degrees.

In all the cells of the freezer, the temperature is the same. Which one can be found using a special thermometer. Studies have shown that most dangerous microorganisms are destroyed during.18 0 s, this temperature is taken as the basic for modern freezers of Electrolux refrigerators.

Modern premium refrigerators from Electrolux become more difficult. Inverter compressor allows you to use an economical mode without launch loads. Electronic temperature regulation and several sensors create the conditions for creating a climate on each shelf of a refrigerator. The control function receives remote access from the smartphone, according to the program.

The storage temperature must meet the requirements on the label of a perishable product. Therefore, dairy products and sausages are stored at 2-3 0 s, fats, cheese, oil up to 5 0, and home dinners on the upper shelves of the refrigerator. The door shelves are far from the evaporator and the highest temperature zone is on them.

What temperature corresponds to the number of thermostat.

Mechanical regulators are regulated by rotating the regulator handle. Rotating the regulator clockwise. we increase the cold, we reduce the clock. The numbers on the handle do not indicate the temperature in degrees Celsius. This is a serial number. They show in what position the regulator will be more cold, and in which less. Typically, the cold adjustment scale has values ​​from 1 to 7. The weakest cold will correspond to the number 1, it will be cold as possible on the number 6-7.

We increase the number. increase the cold. We recommend installing the number 3.

You should not without the need to set the value of 5-7, since the cold is achieved by a longer compressor operation and works with a greater load. In some cases, with such installations of a thermostat, a refrigerator-breaker may not turn off. Even if your refrigerator is disconnected, then electricity consumption increases significantly.

  • on the top panel of the refrigerator
  • The electronic board is mounted on the door, the display on the front surface of the door reports information about the state of temperature inside.

The electronic control of the refrigerator changes the operating mode by pressing the keyboxes. Basically used a control scale from 2 ° C to 8 ° C. Typically, next to the temperature value nearby is a button to change the characteristics. After each press on the button, the value increases by 1 degree. After reaching the maximum adjustment value, the refrigerator automatically goes into a minimum range.

  • Antiquity temperature greatly affects the operation of the refrigerator. The hotter around, the harder it is to create the necessary cold. Most of the refrigerators work normally at the air temperature range of 16-32 ° C degrees. Although the refrigerators have a different climatic class, you should not ask too low temperatures in the summer, since this can cause an increase in energy consumption and the load on the refrigerator. Above the temperature of the surrounding atmosphere is less the number on the regulator.
  • unequivocally say which number of the thermostat should be exhibited in the refrigerator is difficult. The temperature indicators in the refrigerator are determined by a large number of factors: technical condition, refrigerator load, room temperature, door opening frequency, etc.D.
  • Spend the quality of cooling regularly or install a stationary thermometer.
  • If when turning the regulator or changing the value on a digital scoreboard, the real temperature remains the same, call the master.

The choice of temperature regime even in “smart” modern models is manually regulated.

The manufacturer sets the temperature range with the possibility of its change (usually from 2 ° C to 8 ° C for the refrigerator, and from.16 ° C to.24 ° C for freezer). Users have the opportunity to change these parameters and set up the temperature in the refrigerator for themselves. Therefore, before you start setting up the refrigerator for yourself, you must understand: what temperature do you want to get.

Temperature adjustment for modern and derived refrigerators from the production of refrigerators passes according to the same principles. The longer the refrigerator has been working, the more cold it will create. And vice versa. Therefore, by increasing the control value, we change the mode of operation upstairs.

Mechanical or electronic regulators are used to configure the mode.

mechanical. in the form of a wheel, rotary disk

electronic. digital scoreboard

The location depends on the refrigerator model.

  • inside the refrigerator on the wall on the right;
  • on the top panel of the refrigerator;
  • occasionally the regulator can be on the “ceiling” of the refrigerator.

What temperature corresponds to the number of thermostat.

Mechanical regulators are regulated by rotating the regulator handle. Rotating the regulator clockwise. we increase the cold, we reduce the clock. The numbers on the handle do not indicate the temperature in degrees Celsius. This is a serial number. They show in what position the regulator will be more cold, and in which less. Typically, the cold adjustment scale has values ​​from 1 to 7. The weakest cold will correspond to the number 1, it will be cold as possible on the number 6-7.

We increase the number. increase the cold. We recommend installing the number 3.

You should not without the need to set the value of 5-7, since the cold is achieved by a longer compressor operation and works with a greater load. In some cases, with such installations of a thermostat, a refrigerator-breaker may not turn off. Even if your refrigerator is disconnected, then electricity consumption increases significantly.

  • on the top panel of the refrigerator
  • The electronic board is mounted on the door, the display on the front surface of the door reports information about the state of temperature inside.

The electronic control of the refrigerator changes the operating mode by pressing the keyboxes. Basically used a control scale from 2 ° C to 8 ° C. Typically, next to the temperature value nearby is a button to change the characteristics. After each press on the button, the value increases by 1 degree. After reaching the maximum adjustment value, the refrigerator automatically goes into a minimum range.

  • Antiquity temperature greatly affects the operation of the refrigerator. The hotter around, the harder it is to create the necessary cold. Most of the refrigerators work normally at the air temperature range of 16-32 ° C degrees. Although the refrigerators have a different climatic class, you should not ask too low temperatures in the summer, since this can cause an increase in energy consumption and the load on the refrigerator. Above the temperature of the surrounding atmosphere is less the number on the regulator.
  • unequivocally say which number of the thermostat should be exhibited in the refrigerator is difficult. The temperature indicators in the refrigerator are determined by a large number of factors: technical condition, refrigerator load, room temperature, door opening frequency, etc.D.
  • Spend the quality of cooling regularly or install a stationary thermometer.
  • If when turning the regulator or changing the value on a digital scoreboard, the real temperature remains the same, call the master.

Device

  • A corrugated cylinder (bellows), seasoned with freon, from which a capillary (bellows) pipe is emerging, which is a sensitive element.
  • Lever that changes its position depending on pressure inside the bellows.
  • Contacts opening and closing the lever.

The principle of the thermostat

The bellows tube is attached to the surface of the evaporator, and when the temperature is reduced in the evaporator, the pressure in the bellows tube and the belliphon itself falls, the bell tower is compressed, and the lever opens the contact of the power supply circuit of the motor-compressor.

The refrigerator is turned off, the temperature on the surface of the evaporator begins to increase, the pressure in the bellows tube and the bellows increases, and the bellows, expanding, presses on the lever, thus closing the contacts.

The principal scheme of the thermostat

Here we will consider three main types of thermostats. Outwardly they look the same, the differences are in the temperature of opening and closing contacts.

The thermostats of the following designations were installed on single.chamber refrigerators:

T-110; T-111; T-112. The thermostat T-112 may have a designation of TU-112, or TU-112-1M. In terms of temperature parameters, all these thermostats are the same. They differ by the appearance. the diameter of the handle of the handle and the bellows tube, the presence of a transverse bar for attaching the thermostat. The end of the thermostat bellows tube is usually attached directly to the evaporator through a plastic gasket. The length of the bellows tube is indicated on the thermostat case and has the form of two digits separated by a comma. Example: a) 0.6. the length of the tube. 60 cm.; b) 1.3. tube length. 1 meter 30 cm.

There are three terminals on the end of the thermostat case. Divine is “Earth”, t.e. Thermostat case. The other two under numbers 3 and 4 are contacts through which the motor-compressor is written.

To install the thermostats of the new TU-112, instead of T-110, an installation kit consisting of a bar, a nut and a nylon adapter, which increases the diameter of the adjusting rod, is provided.

The thermostat of the next designations were installed on two-chamber refrigerators and refrigerator chambers of two-motor two-chamber refrigerators: T-130; T-132; T-133; Tam-133 and there-133-1m.

electrolux, refrigerator, temperature

The temperature parameters are the same. Distinguish between the appearance, the diameter of the handle rod and the bellows tube, the presence of a transverse bar for attaching the thermostat.

Basically, T-144 and T-145 thermostats were installed on freezers.

On the thermostat T-144 there is no rod for regulating temperature, this value is set at the manufacturer.

There are four terminals at the end of the thermostat case. Divine is “Earth”, t.e. Thermostat case. The other two under numbers 3 and 4 are contacts through which the motor-compressor is written. A red emergency lamp is powered through contact 6, which means elevated temperature in the freezer cabinet. The opening temperature of this contact is −15 ° C.

Separately, we will consider the thermostats for STINOL refrigerators:

It can be the thermostats of the K-57 and K-59 RANCO, as well as the domestic thermostats TAR-133-1M and TU-145-1M. They differ from other thermostats by the bellows tube, which is covered with a vinyl shell. In addition, they are equipped with a third contact at number 6, from which a motor-compressor is powered.

Repair of Electrolux Electrolux refrigerators.

In case of problems with operation and the slightest assumptions about the malfunction, you should not postpone the decision on the inevitability of repairing the Electrolux refrigerator. It is better to call and consulted with the master to find out if the need for repairing the Electrolux refrigerator has appeared at home.

If there are deviations in the work, and you thought about repairing the Electrolux refrigerator, call! The master, having talked with you, will find out the symptoms of problems and give a competent consultation. And if necessary, he will arrive for the repair of the Electrolux refrigerator.

Elimination of malfunctions by models:

Electrolux Electrolux refrigerators Production.

The Swedish company Electrolux is one of the flagships of the European refrigerator market. This concern is distinguished by the quality of products, a long history, and an excellent reputation confirmed by consumer reviews.

Electrolux concern was created at the very beginning of the twentieth century, and after twenty.five years the first refrigerator of this brand appeared on the market. To date, factories for the production of this equipment are located in Europe, the USA, as well as in South America. This technique gathered and in. from 2006 to 2009 in Kalina, the production of household refrigerators was established.

Electrolux Refrigerator Troubleshooting

Electrolux plants located in different countries are representatives of one of the most powerful companies in the manufacture of household appliances in the world. The enterprises of this concern are equipped with modern equipment and are allocated by the latest developments of engineers, which allows them to produce high.quality refrigerators, which meet all modern requirements. They differ not only in reliability, ease of use and a long service life, but also a great design.

Thanks to its traditions, the Electrolux trademark has become popular all over the world and its factories, regardless of their location, are proud of the quality of their work and observe the highest standards.