What to do if it does not freeze the upper chamber in the SAMSUNG two-chamber refrigerator with the NO Frost system

Refrigerator. a difficult high-tech device, to figure out which is not. Serves such a household appliance for a long time, but sometimes an incomprehensible problem occurs: a samsung refrigerator two-chamber. does not cool the upper chamber, and freezer frost. It seems to be a refrigerator and is working, but in fact. no. Such a problem is not only unpleasant, but also is dangerous. First of all, the refrigerator can finally break down, which threatens considerable financial losses. If products are stored with improper temperature. this is a direct threat to health. Let’s try to figure out what happened why the refrigerator flashes, and is it possible to fix it.

freezer, error

Fridge Frost Nou stopped cooling. How to avoid refrigerator malfunction? Compressor is the heart of the refrigerator. The general scheme of the device works in this way:

  • Thanks to him there is pressure. It is with the help of the pressure formed the refrigerant moves to the condenser where the gas turns into a liquid.
  • In the process, heat is allocated, which is felt when the rear wall of the refrigerator is touched.
  • Freon, passing through narrow tubes, turns into gas again.
  • After Freon getting into the evaporator, boiling it. In the evaporator and the cold is formed.
  • Tubes are located around the freezer, where the cold and applies on. That is, if it does not freeze the freezer. there will be no cold and in the refrigeration chamber.
  • Then the refrigerant returns to the compressor and the cycle is completed.

HICOLD GN 11 / BT Operating Instructions Online. Page 8

Manual HICOLD GN 11 / BT for the device The freezer table contains pages in Russian.

File size: 417.10 kb. Consists of 8 pages.

You can download the PDF file of this instruction: Download PDF

Alarm when the lower temperature limit is reached

Alarm when the upper temperature limit is reached

Camera temperature sensor malfunction

When the reason caused the activation of the alarm will be eliminated, the device

7.1 When loading the table, the following rules must be followed:

Decompose the products in the place allotted for them, not exceeding

Maximum load lines. In case of exceeding this line,

Air circulation will be insufficient and product temperature

will be higher, moreover, the evaporator may be faster than

When loading products, keep track of the holes

The ventilation channels of the evaporator were always open.

Products must be laid uniformly.

Products must be laid uniformly.

7.2 Recommended working point temperature:

Low-temperature table (BT) 12ºС ÷.15ºС

eight.1 Towing the evaporator of the table automatically, due to

Periodic stopping compressor under the program laid in

electronic controller, which indicates the indicator on the display

Controller. Water formed due to exhaust evaporator,

collected in the tray, and through the tube is given to the bath installed in

eight.2 The parameters of automatic evaporation of the evaporator are selected and

Programmed by the manufacturer in accordance with the conditions of the surrounding

ozti freezer GN1200lmv errors AH/freezer coming error ah how to fixed

Environments and adopted standard product testing methods. Therefore B

The case of excessive measurement of the evaporator should be used

freezer, error

Forced thawing mode (see. GL. 6) or contact the service

organization to adjust the controller program with actually

eight.3 Duration and periodicity of thawing is programmed based on

From the technical data of the temperature mode of the cooled volume.

The manufacturer does not guarantee normal operation of the automatic system

thawing when installing the temperature consumer below

Specifications for this table model.

nine.1 In the high-temperature and mid-temperature table, we recommend

maintain temperatures within the limits required for storage

associated with insufficient evaporator.

nine.2 In the low-temperature table, we recommend maintaining the temperature

With. it is the most optimal and energy saving

nine.3 Place the products in the table only after it

ten.1 Cleaning and cleaning the table at least 1 time per month:

Wait until the temperature inside the table rises to

Room temperature (with open doors).

Clean the surface of the internal volume of the table, where they were stored

Products without using abrasive agents and solvents.

See also  What does Nou Frost in the freezer

Clean the refrigeration unit capacitor with dry

Tassels (brushes) or vacuum cleaners, while it is necessary to show caution,

We repair the brand

Alexander 2021-03-09 12:56:00

ATLANT company can be compared with Japanese Sony in quality.I have a refrigerator served faith and the truth is 17 years old there was no breakdown. Guys just made prevention!

Vladimir 2021-02-25 16:02:00

Called to learn the possibility of repairing the Bosch refrigerator. What a man said that it is immediately necessary to look at the refrigerator, because he does not see by phone.

Hello! Master of refrigerators Atlant Super!

Called the first number, urgently needed a master, t.to. The refrigerator is broken when working. Five minutes enough to make an order. Man caught very competent. All our conversation he asked about the problem. On the same day, the masters did not work out (he appealed at 14:00), appointed time for tomorrow

Svetlana 2020-12-06 16:46:19

Everything is great and super! Excellent company! In the morning I found that the freezer flows in my Atlanta and the upper chamber works. Chose on the Internet by chance this company and called. And after an hour, the masters arrived and made me a refrigerator. It is twisted, and the motor spoiled on the freezer and replaced it.

Employee on the phone polite. Listened, gave recommendations. Nice to contact such experts.

Ordered after communication by phone. Work is sally

Installed the sensor on the Bosch brand refrigerator. Everything is working.

Useful materials

In the USSR, the size of domestic refrigerators were strictly regulated by the relevant standard. typical modules were created taking into account the measurements of the input and interior doors, the cuisine planning in the mass building buildings. Today there are no such standards, so the buyer can.

Modern refrigerators are so functional and smart that they are extremely problematic to use. the software part is really interesting and complex at the same time. Among not so much popular as the necessary modern options can be distinguished the functions of rapid cooling and maintaining the freshness zone.

Competent freezing of products preserves freshness and taste. Vegetables and greens from beds contain the maximum amount of vitamins and useful trace elements, as well as apples only with wood, pair milk from under cow and fresh meat. But with improper storage, products quickly lose taste.

Urban 375 17 271-00-36

© XoloDremont-Minsk.By, Minsk Service Salvation Refrigerators and Freezers. UNP 192572653 All rights reserved. Copying and reprinting only with the permission of the XOLODREMONT-MINSK owner.by

What to do if the samsung error code appears on the display

The malfunction code helps to determine the breakdown. If a symbol appeared on the display or a combination of light bulbs. let me know the master repairing the refrigerators, it will help to prepare in advance for repair.

Alexander 2021-03-09 12:56:00

ATLANT company can be compared with Japanese Sony in quality.I have a refrigerator served faith and the truth is 17 years old there was no breakdown. Guys just made prevention!

Vladimir 2021-02-25 16:02:00

Called to learn the possibility of repairing the Bosch refrigerator. What a man said that it is immediately necessary to look at the refrigerator, because he does not see by phone.

Hello! Master of refrigerators Atlant Super!

Called the first number, urgently needed a master, t.to. The refrigerator is broken when working. Five minutes enough to make an order. Man caught very competent. All our conversation he asked about the problem. On the same day, the masters did not work out (he appealed at 14:00), appointed time for tomorrow

Svetlana 2020-12-06 16:46:19

Everything is great and super! Excellent company! In the morning I found that the freezer flows in my Atlanta and the upper chamber works. Chose on the Internet by chance this company and called. And after an hour, the masters arrived and made me a refrigerator. It is twisted, and the motor spoiled on the freezer and replaced it.

Employee on the phone polite. Listened, gave recommendations. Nice to contact such experts.

Ordered after communication by phone. Work is sally

Installed the sensor on the Bosch brand refrigerator. Everything is working.

Useful materials

In the USSR, the size of domestic refrigerators were strictly regulated by the relevant standard. typical modules were created taking into account the measurements of the input and interior doors, the cuisine planning in the mass building buildings. Today there are no such standards, so the buyer can.

Modern refrigerators are so functional and smart that they are extremely problematic to use. the software part is really interesting and complex at the same time. Among not so much popular as the necessary modern options can be distinguished the functions of rapid cooling and maintaining the freshness zone.

See also  Oven Electric Burning Loca Error

Competent freezing of products preserves freshness and taste. Vegetables and greens from beds contain the maximum amount of vitamins and useful trace elements, as well as apples only with wood, pair milk from under cow and fresh meat. But with improper storage, products quickly lose taste.

Urban 375 17 271-00-36

© XoloDremont-Minsk.By, Minsk Service Salvation Refrigerators and Freezers. UNP 192572653 All rights reserved. Copying and reprinting only with the permission of the XOLODREMONT-MINSK owner.by

Liebherr refrigerator error codes

Error codes in Liebherr refrigerators are shown on the panels with a digital display and a LED temperature indication. In the instructions for refrigerators, the manufacturer does not indicate that the fault codes indicate and recommends contacting service centers at any breakdowns. Therefore, if the code is displayed on the panel, the Alarm light flashes or other signs of breakage appeared. it is better to write them down and reported when you call the Wizard for repairing the refrigerator Liebher.

The manufacturer releases several variants of digital panels on which errors are displayed. The panel is located on the upper end of the housing or on the door.

An example of the control panel of the refrigerator Liebher on the housing

Performance on the case can be hidden behind the door or is in plain sight.

In the Side-BY-Side Liebherr refrigerators, two control panels are usually used immediately. separately for freezer and refrigeration chamber.

An example of a panel for half of the refrigerator in the Side-BY-SIDE model

In models with LED error indication, Alarm light bulb and flashing temperature on the scoreboard. If the fault is associated with an increase in temperature, simultaneously with the flashing Alarm machine makes a beep. The Alarm light bulb can light up when the refrigerator is first turned on or when you put inside a lot of warm products. in this case, you need to wait until the temperature in the cameras comes to normal. If the fault signal is lit for more than four hours. you need to look for another defect.

In some models, the error signal can be shown by flashing the freezing symbol and temperature icon.

If all light bulbs are burning on the LED panel or the DEMO inscription is lit on the display. a demonstration mode is activated on the refrigerator. It usually happens with new refrigerators. The manufacturer recommends contacting the store so that they tell how to switch the machine to the operating mode, but it can be done easier: turn off the machine from the outlet and turn it on again. After that, one should start a demo-time straightening. press the Demo or Off button to enable normal mode.

On some Liebherr models, the inverter self-diagnosis is provided. green LED flashes on the rear panel next to the compressor. Normal mode. Turning on the LED every 15 seconds. If the light flashes more often. it means something wrong with the inverter.

In refrigerators with display, the fault code is shown by symbols:

  • NR, NA or Power Icon. Malfunction shows that the temperature in the freezer rises for several hours. This usually happens when the electricity is turned off. If you press the ALARM button with such an indication, the maximum temperature will appear on the panel to which the freezer was heated. This feature is needed to determine whether products managed to spoil. A minute later, the display goes into normal operation.
  • Sensor breakdowns:
  • F0. in the freshness zone;
  • F1. in the refrigeration chamber;
  • F2. on the evaporator;
  • F3. in the freezer;
  • F7. outdoor air.

When the error symbol is displayed on the Liebherr refrigerators. write it down and click on the corresponding button, Alarm or Off so that the panel passes to the main mode. And the fault code is informing when the refrigerator repair wizard is called.

Small problems

There are many more reasons for annoying sound. These may be minor problems that are eliminated independently or more serious faults.

  • Because of the altage of ice, the flap opens when cold air arrives. Because of this, the temperature in the chambers is growing. Complete defrosting.
  • Products are incorrectly placed on the shelves and interfere with dense closure. These are pens of a pan or a mixed box for vegetables. Need to fix the dishes.
  • If the door closing sensor broke, the signal is triggered even if it is sealed.
  • Perhaps inside put a saucepan with not cooled soup or other warm products. The thermal sensor responds to an increase in temperature in the chamber.
  • Check the control system. Could be accidentally pressing the superzamorozki button or the parameters are incorrectly set.
See also  Smoked smoked smoking refrigerator

Small problems

Nord refrigerator does not freeze

The first thing that comes to mind on this occasion is of course, Freon’s leakage. Refrigerators with the top arrangement of the freezer, in which case are not repaired, with the exception of old, where it was possible to pull the freezer from the housing. In general, we will talk, only about those units whose freezer is below and to start listing signs of refrigerant leakage from the system

  • The freezer is very frosting
  • In the refrigeration chamber disappeared
  • Does not freeze in both cameras
  • Condenser Cold → This is a metal grille that stands behind the refrigerator
  • The intention of ice on the rear wall of the refrigeration department
  • The compressor is not turned off

I listed almost all the signs that indicate the leakage of Freon. For complete confidence, you need to do the following procedure. First of all, fully defrost the refrigerator, then turn it on for 2 hours and be sure to put a street thermometer in the refrigerator, during this time the door in both cameras should be closed, that is, to open them. After 2 / 2.5 hours, look at the temperature in the refrigeration chamber if it is higher than 6-7 degrees of heat, then 100% are about leakage of freon or scored capigile. Below I posted a video in which I show the installation of a crying evaporator in the refrigeration chamber. Only in this way, you can eliminate refrigerant leakage in the system

I have a two-chamber fridge Nord, the freezer is located at the top. In general, the problem is that he stopped disconnected, and in the corner of the refrigerator chamber, the ice block was formed, on the rest of the rear wall, the water droplets are visible and they flow into the gutter for draining. Called the master, he came, did something in the back, opened the refrigeration chamber and said that there was a leakage. The most important thing is that the master said that these refrigerators are not repaired in such cases, that is, they are disposable. Explain, please, is it true that they are disposable and as a master could determine the leakage of freon in 5 minutes. I have doubts about the qualifications of this subject, because as far as I know, you must at least lower the gas to make sure about the diagnosis

Firstly, these refrigerators are truly disposable if the freezer stood downstairs, it would be possible to establish a crying evaporator, and in such an unit, leakage can be anywhere, including in the freezer, and unfortunately you do not check. Now about the fact that the master made a diagnosis in 5 minutes, it is quite possible, first of the first, he touched the capacitor and apparently discovered that its temperature does not correspond to the norm, on he opened the refrigeration chamber and saw on the back wall of the ice and water drops on the back wall. In general, here to make a conclusion, it is quite simple and you can not meet not in 5 minutes, but in 30 seconds

Problems with door

Often the product signals that cold air leakage occurs due to a faulty door, there may be several options.

  • Door loosely closed. cold air leakage occurs through the slots, which immediately reports the product. It is necessary to carefully examine the rubber of the sealer throughout the perimeter, perhaps the problem occurs due to the rubber defect. Check the arrangement of tanks on the shelves. it is possible that the protruding handle prevents the closure.
  • In some cases, the straight wines of the seal rubber. over time, it loses its elasticity, there is deformation at the place of clamping to the refrigerator housing. We have to change the rubber seal.
  • When closing, the door closing sensor button is not pressed or it has failed. From long use, the button may not be able to sleep, so the system includes all types of alarms, and leakage does not happen. no contact. There are two options here: Replace the faulty sensor or in contact site paste a small segment of rubber for the implementation of sustainable contact.

You can easily eliminate small defects only after a warranty, otherwise call the service, they will send a master who will quickly correct the problem, will replace broken items.