How many cast iron battery weigh
Now it has become obvious, what is the weight of the battery from the cast iron popular among consumers series. But the characteristics of the original devices differ relative to the cost and mass.
For example, one section of a three-channel floor heating device of French production GURATEC APOLLO 795 Weighs 13.5 kilograms. The product is demonstrated on sale 7-section batteries, the total weight of which is 94.5 kilograms. With its transportation, unloading and installation will need a help of several employees.
What’s With the Logs on Soviet Tanks? | Koala Explains: Tanks. Tracks and Traction
Foreign radiators before implementing in domestic markets must undergo a procedure for compulsory certification relative to the compliance with GOST, but at the same time the weight of the part is not taken into account
Characteristics of cast iron heating radiators
Before buying a cast iron radiator, it is necessary to consider its technical characteristics that will be approached by the features of your heating system.
Weight 1 section of the standard cast iron radiator 7.5 kilogram.
Thus, the weight of the cast-iron battery from:
2 sections will be 15 kilograms.
3 sections will be 22.5 kilogram.
4 sections will be 30 kilograms.
5 sections will be 37.5 kilogram.
6 sections will be 45 kilograms.
7 sections will be 52.5 kilogram.
8 sections will be 60 kilograms.
9 sections will be 67.5 kilogram.
10 sections will be 75 kilograms.
11 sections will be 82.5 kilogram.
12 sections will be 90 kilograms.
13 sections will be 97.5 kilogram.
14 sections will be 105 kilograms.
What value is the weight of the battery
Own information about how much the cast iron radiator heating is needed for a number of reasons. For example, if the batteries are purchased for installation throughout private household, it is required to calculate the carrying capacity of the machine carrying heating devices, and should also be declaring the number of movers that will be entered into the house.
For clarity, you can compare the weight of cast-iron radiators of obsolete samples and modern analogues from other materials:
- One section of standard cast iron batteries with an inter-axis 500-millimeter distance weighs 5.5. 7.2 kilograms, and with an inter-axle parameter 300 millimeters, from 4.0 to 5.4 kilograms;
- The weight of the ribs of non-standard heating cast iron devices is from 3.7 to 14.5 kilograms;
- The selection of the aluminum battery at the inter-axis range of 500 millimeters weighs 1.45 kilograms, and at 350 millimeters. 1.2 kilograms;
- Bimetallic devices with an inter-axis distance equal to 500 millimeters weigh 1.92 kg / section, and at 350 millimeters, 1.36 kg / section.
When carrying out the repair and replacement of heating equipment in the house of its owners, it is important to know how much old cast-iron battery weighs to decide whether it will be able to independently put an old multisective radiator on the street because it is necessary to calculate its own forces. But there is no such data.
The reason is that there are various models in operation. At the same time they have the same purpose, but different weight. In addition, in the domestic market are implemented devices that differ in dimensions and a variety of forms.
To date, for example, the names of traditional cast iron batteries are found more than several dozen, and models performed in the design style, and it is difficult to calculate. At the same time, such a parameter as the weight of one section of the cast-iron radiator is very different.
How much is one section of the cast-iron battery of the old sample weigh
Despite the creation of a huge amount of new generation heating batteries from various modern materials, cast-iron batteries so far can create competition to new models.
To find out how much it weighs the selection of the cast-iron battery, you need to pay attention to the manufacturer of heating radiators.
All new. well forgotten old
Now, now a little about pleasant: service life and sensitivity to the quality of the coolant are those characteristics by which pig-iron radiators are ahead of all competitors. This is understandable. cast iron is absolutely resistant to abrasive wear and does not enter into chemical reactions with materials of pipes or elements of boilers. The size of the channels inside the sections here is impressive, so these batteries are almost never clogged, but, therefore, they do not need technical cleaning work.
Many specialists argue that the service life of modern cast iron batteries is 30-40 years. What, it may very much, because in many homes, old Soviet radiators are still alive.
However, there is here and your own spoon of tar. hydraulic blows. Talk about it further. Below we invite you to familiarize yourself with the video about the advantages and disadvantages of cast-iron batteries:
The device of pig-iron radiators.
Almost all cast iron products. set, consisting of separate sections of the connected nipple sleeves. With their manufacture applies gray cast iron. Paronite gaskets are installed between individual sections. Horizontally water current always goes in one direction. Vertically the current occurs through the channels that happens from one and more. Depending on the number of vertical channels, the area and power of the battery increases.
Due to the need to preserve the strength and surface area, manufacturers cannot strongly change the ratio of mass and power. Between the battery implies reinforced fasteners.
How much is the selection of the cast-iron battery weigh?
Standard section of the cast-iron battery weighs 7.5 kg. You can connect them as much as you like, usually, together install from 4 to 24 sections. sections may simply not withstand the wall mount. The more sections in the battery, the higher its heat transfer will be. When filling one radiator section, 4.2 liters of water is placed in it. The heat transfer of the cast-iron battery is calculated, based on the temperature of the water in the heating device and the temperature of its surface. According to regulations, it should be in the system of heating at least 90 degrees Celsius, the surface of the radiator is heated to 70 degrees Celsius.
Knowing the weight of one section of the radiator, you can calculate the weight of the cast-iron battery consisting of more sections. For example, the weight of the battery from seven sections will be equal to fifty kilograms.
In the same way, the heat transfer of the heating device is calculated: the heat efficiency of one radiator section is multiplied by their number in the heating device. Very important and such an indicator as a useful heating area. The cast iron radiator has a form at which the heating surface is quite extensive, which increases the heat transfer of the entire device. ribbed batteries with a small surface can produce heat transfer coefficient not more than 0.23 kV. meters from the surface of the entire source of heat.
Surface treatment: Okrewing
Such heating devices require frequent painting, as they remain scratches or chips.
If you change the color of the heating device, it may be necessary to repair in the entire room. The process of updating the color of the radiator is divided into several stages.
The first stage includes surface preparation. To begin with, it is thoroughly washed with a battery, not forgetting to remove traces of dirt between sections.
After removing the layer of old paint. for this there are many special solutions that do not harm metal. The solution is applied to the heating device with a dry tassel and wrap the radiator film. Already an hour, paint is removed with a spatula. After carefully, the surface of the battery of fine-grained emery paper and degreases with a solvent. If there are areas touched by rust on the battery, they are processed to metal.