How to pull the belt in the washing machine samsung. How to change the belt on the washing machine samsung. How to determine what is required to replace the driving belt of the washing machine

Before repair, you should purchase a new pass. SAMSUNG model range (Samsung S1021, S803J, S821 and others) is equipped with a yellow italian strap Megadyne 1270J3. Than you can replace the part in the absence of a similar? Cheri PAS 1270J4 is suitable. it stretches worse, which will complicate the installation process slightly, but the system will last longer, thanks to the additional “stream”.

Before the procedure, turn off the CM from the power supply, communications, move away from the wall. To work it will take a dump, durable cord. Assistant will save time and strength.

How to put a strap on a washing machine:

  • Remove the top cover, unscrewing fasteners.
  • Remove the bottom panel. it’s easier to get to the mechanism.
  • Disconnect the old Pasik and its remnants from pulley and engine. wounded pieces can hook wiring, damage isolation.

How to pull:

  • Tie a durable cord or attach a wire.
  • Lower the detail to the shaft through the top, hook for the motor pulley. It is easy to reach it, tilting the machine to the front side to myself by 30-40 °. The tank will shift and open access to the drive. If you work with an assistant, he will be able to hold the fastening and control it correctly until you pull the mount on the wheel of the pulley.
  • Pull up, put on the pulley of the drum, scrolling clockwise.
  • Make sure the pass is lighted in the center of the track, firmly fixed.
  • Remove the auxiliary cord.
  • Ready! It remains to collect the machine and launch the check washing.

We hope you managed to change the spare part independently. it means you saved about 1000 on the call of the master. In the simplicity of repair you will convince you

To avoid breakage in the future, make sure that see is installed smoothly, correctly, without skew. Do not overload the drum. it will protect the new stretch strap.

The reasons why the belt with the drum of the washing machine flies or breaks

First of all, the reason you need to search in the belt itself. This is:

  • Wear or stretching beltism for long-term operation.
  • Self installation of the belt is not the brand or type, or incorrect belt installation.
  • Drinking machine drying, which are not exploited for a long time (more characteristic of models with vertical loading). In the place of the greatest inflection, on the engine pulley, the belt loses elasticity and “freezes” in such a reinforcement state. When you turn on the machine, this area straightens and breaks.
  • Strong imbalance under annealing: if the machine is overloaded, the shock-absorbing systems may not cope, and the wash will begin to vibrate too much, as a result of which the drive belt suffers. The problem of the imbalance is most acute for narrow washing machines: in them all the details are extremely close to each other, and the belt during vibrations can touch the bulges or screws on the back wall, which scares or breaks down.
See also  Xiaomi Enchen Hummingbird Shearing Machine Black

In the latter case, the belt most often remains the whole, but falls from the pulleys. You don’t need to change such a belt, you only need to put it on the place and further comply with the rules of operation of the washing machine, without overloading it.

Unfortunately, the belt often falls or rifles due to the occurrence of other types of malfunctions in the washing machine. These include:

  • Wearing and / or partial destruction of bearing enforces to the occurrence of the hollow of the axis of the drum and increased vibrations during washing and, especially, pressed. As a result, the belt stretches and constantly flies from the pulleys or rifles.
  • Violation of the geometry of the engine pulleys and the drum, which can occur due to the weakening of the motor mounts, pulley deformations and / or shaft, damage to the crosses, tank deformations (more characteristic of machines with vertical loading), violations of pulley fasteners, etc. All this leads to excessive vibration. As a result. the belt flies or breaks.

That is why when problems with the drive belt occur, we recommend contacting specialists! Only the complete diagnosis of the washing machine will determine the cause, why scores or turning the drive belt, and a timely eliminate the malfunction.

The reasons why the belt with the drum of the washing machine flies or breaks

First of all, the reason you need to search in the belt itself. This is:

  • Wear or stretching belt due to long-term operation.
  • Self installation of the belt is not the brand or type, or incorrect belt installation.
  • Drying belt in machines that have not been operated for a long time (more characteristic of models with vertical loading). In the place of the greatest inflection, on the engine pulley, the belt loses elasticity and “freezes” in such a reinforcement state. When you turn on the machine, this area straightens and breaks.
  • Strong imbalance under annealing: if the machine is overloaded, the shock-absorbing systems may not cope, and the wash will begin to vibrate too much, as a result of which the drive belt suffers. The problem of the imbalance is most acute for narrow washing machines: in them all the details are extremely close to each other, and the belt during vibrations can touch the bulges or screws on the back wall, which scares or breaks down.
change, belt, washing, machine, samsung

In the latter case, the belt most often remains the whole, but falls from the pulleys. You don’t need to change such a belt, you only need to put it on the place and further comply with the rules of operation of the washing machine, without overloading it.

Unfortunately, the belt often falls or rifles due to the occurrence of other types of malfunctions in the washing machine. These include:

  • Wearing and / or partial destruction of the bearing leads to the occurrence of the hollow of the axis of the drum and increased vibrations during washing and, especially, pressed. As a result, the belt stretches and constantly flies from the pulleys or rifles.
  • Violation of the geometry of engine pulleys and drum. which may occur due to the weakening of the fastenings of the motor, pulley deformations and / or shaft, damage to the cross, the deformations of the tank (more characteristic of the machines with vertical loading), violations of the attachment of pulley and others. All this leads to excessive vibration. As a result. the belt flies or breaks.

That is why when problems with the drive belt occur, we recommend contacting specialists! Only the complete diagnosis of the washing machine will determine the cause, why scores or turning the drive belt, and a timely eliminate the malfunction.

Acquire “Right” belt

Do not buy a detail of the Namaum, here it is very easy to make a mistake with marking. It is best to get a spoiled belt from the aggregate and take it with you to the store. Sales Specialist will carefully examine the item provided by you, check the labeling and selects you the necessary element for replacement. If you want to buy a belt in the online store, be sure to look at the label, and select the right detail. We will provide for your consideration a few labels of drive belts suitable for various lacery indesitis:

To replace the strap in LG equipment, you should unscrew the bolts located on the rear wall of the case and remove the lid fixed by them. You can make these manipulations using the cross screwdriver.

See also  How to eliminate the smell of mold in a washing machine

Remove the failed strap, pulling it aside and parallel to turning the pulley.When rotating, the element can burst and fly. In this case, it is important to collect all parts of it so that in the future they did not damage the machine.

Now wear a new strap on the engine, and after it. for pulley. To do this, pull the strap to its circle and carefully turn. Check that the belt gets exactly where it should be, and it was thoroughly pressed to the groove. Check the pulley to check the installation correctness. After checking is performed, return the locking panel back and screw the bolts.

As you can see, change the failed belt in the washing machine will not work. The main thing is to produce all actions slowly and clearly adhering to the action plan.

Is it worth doing repair yourself

Important! If you are far from repairing household appliances and have never been doing this before, it is best to trust the professionals that will eliminate the problem quickly and efficiently.

Perform inspection and diagnostics of the washing machine will be able to any user. Depending on the detected fault, decide whether to apply for help to a professional master or handle yourself.

Before making a decision to eliminate a malfunction, should make sure whether the warranty has expired? Manufacturers of equipment of famous brands, such as “Indesit”, “Samsung”, “Electrolux”, provide a warranty period from a year to three years.

If you have decided to seek help to professionals, it is better to contact the service center. Why it should be done?

  • Warranty for carrying out repair work.
  • Replacing component parts, if necessary, will be made of “native” parts.
  • The competence of the masters is no doubt.
change, belt, washing, machine, samsung

And the master you find on the ad will not give any guarantees. Replacement of faulty item it will perform, but it is possible that it will not be the brand. As far as the machine will work after such a repair. it is also unknown.

For what purpose is the replacement of gum?

Sometimes the SAMSUNG washing machine refuses to work because of the insignificant breakdowns, and this does not mean that every time you should seek help in a service center. So that the machine for washing the linen does not give interruptions and fully performed all the specified functions, it is recommended to perform replacement from time to time or cleaning the gasket from the rubber material intended for ensuring tightness during operation. Such actions are performed in certain cases:

Belt adjustment for Samsung fully Automatic washing machine.

  • The gum is removed with the goal to clean the space under it, check the drain area for the accumulation of dirt,
  • Replacing the gum is carried out after a certain operational period, when it lost all properties and does not fulfill the task of sealing the unit.

Decide on the need to replace the element or cleaning it, it is possible by means of inspection. with impaired integrity, visible contaminants and the feeling of an indous smell, appropriate measures are immediately taken. In addition, water flowing from under hatch in the process of washing is a clear sign of failure.

The process of disconnecting components parts

Having finished the panel removal process, go to the next stage of machine disassembly:

  • Disconnect connecting hoses from the internal base of the dispenser by weakening metal clamps.
  • Remove the counterweight, unscrewing the fastening screws. You should pay attention to the high weight of this item.
  • We dismantle the water level sensor connected by the rubber hose with the base of the dispenser. We carry out the removal of the clamp installed on the rubber hose, which will allow to release the part from the hose.
  • Disconnect the nozzle that is connected between the tank and the dispenser element.
  • Remove the counterweights equipped on the plane of the tank. You must unscrew six bolts using an end key.
  • We carry out the discharge of the nozzle from the tank, equipped in the bottom plane of the housing. It connects the tank with a drain pump, from which he also disconnects it.
  • Remove the horizontal metal profile located in the top of the case. To do this, unscrew several fasteners.
  • Remove the back cover, twisting the screws with a screwdriver.
  • It is necessary to disconnect the contacts of the heating device (TEN) using electrical clutters.
  • Disconnect the tank shock absorbers and carefully remove the body.
See also  Where to pour bleach in the Bosch washing machine

Recurney malfunction

If the gum breaks down from pulley periodically, it may indicate certain problems in the system. When the belt decreases more than 2 times within 6 months, it is necessary to prevail and diagnose “home assistant”. The main reasons for the multiple flushing of the element from the functional wheel of the drum and the engine can be considered:

change, belt, washing, machine, samsung
  • Wear drive belt. Very often he falls precisely because of his natural stretching. If there are traces of production, wedges selectively waste, length increased markedly in comparison with the factory, it means that the gum has developed its resource and needs to be replaced;
  • Lesuft Shkiva. In such a situation, the belt is fixed on the wheel unreliable and will periodically fly when the drum rotates. Conduct the problem is quite simple. just tighten the fastening bolt or replace the pulley;
  • Weak fixation of the electric motor. SAMSUNG washing machine motor is securely fixed, but due to the constant vibrations of the automaton during operation, the bolts can be unwound, the engine “breaks”. This leads to a violation of the belt transmission. To eliminate the breakdown, fix the engine in place, tightening well all its fasteners;
  • Incorrect shaft shaft or functional wheel. After unsuccessful repairs, in the process of which the “Mount-Masters” wrapped the pulley, just problems with the driving belt. There is a way out of the situation. it is allowed to accurately straighten the uneven surface, but the best option will be the full replacement of the pulley;

Also lead to periodic decline may errors allowed by past repair element.

It is about installing the drive belt not to the end. if it was not fixed in the groove, sooner or later there will be another cooling. It also happens that the gum is not changing the same, but somewhat different from the original. Then you can also expect her breakdown. To prevent the belt falling, it is necessary to replace the element of the new, suitable to the specific model of samsung washing.

So, understanding with the reason and correctly removing it, you can forget about the problems with the belt transfer for a long time and continue to use the washing machine on.