Methods and rules for cleaning the toaster inside and outside at home

Due to the frantic rhythm of life or a loaded schedule, very often people miss the most important meal per day. Toster is a convenient device that can be strongly helped with cooking breakfast “in haste”. However, its frequent use leads to the accumulation of small litter, loafy crumbs, unpleasant odors and oily plaque. To maintain the purity of this device, you should know how to clean the toaster correctly.

Any household appliances requires careful handling and periodic maintenance. Nar, bold plaque and crumbs will eventually lead to a breakdown of the device. Cleaning is required for many reasons: the remnants of Bukhankaa, under the influence of the heating element, begin to burn, and the crumbs will serve food for bacteria and cockroaches. In addition, the risk of blocking the spiral inside the toaster increases.

Preparation for the procedure

Previously, the toaster is necessarily disconnected from the power supply power supply. the hands should be dry. The cleaning process is started only after the device has completely cooled. Otherwise, you can get a strong burn. It is recommended to cover the working surface with a dense fabric or a newspaper. in the future it will be easier to remove all the loafy crumbs.

It will not be superfluous to familiarize yourself with the instructions for the device, which indicates the safety rules and recommendations for the care of technology.

How to wash a toaster from the inside

During cleaning in the kitchen, Toster often remains unattended. And its inner surface is a hard.to.reach place. But you should not ignore the device. sticky crumbs or drops of fat that have fallen from the stove can lead to undesirable consequences:

  • accumulated garbage will not allow the heating element to warm up evenly, and the device will burn out;
  • A large number of crumbs inside contributes to the propagation of bacteria, attracting unwanted insects (midges, ants, cockroaches), mold formation;
  • The crumbs with constant heating burn out, forming a carpet and an unpleasant odor, which fresh toasts absorb.

Preparatory procedures

Before washing the toaster inside, you need to prepare the device itself and the workplace:

  • Disconnect the device from the network.
  • Wait for the cooling of the toaster if you use it before cleaning.
  • Bull the working surface with newspapers or food film.
  • If below the device has a removable tray to remove crumbs, remove it, clean it from the contents and rinse with warm water with detergent for dishes. Use a foam sponge or microfiber napkin. Then wipe the part with a towel and completely dry.
  • If there is no tray, turn the device over the newspaper and gently shake out the garbage.

Remember that cleaning with abrasives (metal sponges, brushes, cleaning products in powders) will not only spoil the appearance of the device, but also violate the order of its operation.

Attention! Wash the toaster under the tap or immerse it in the water! If moisture hit by accident, thoroughly dry the device.

The impossibility of using water eliminates the use of liquid detergents and compositions requiring flushing.

When the surface is not polluted much, try to do with mechanical cleaning. Poppiece the toaster or remove the crumbs with a cold hair dryer. Instead of a hairdryer, you can use a cylinder with compressed air (they are usually used to clean the computer keyboard). Such cylinders are sold in the department of office equipment.

Cleaning

To cleanse more serious contaminants, soda or large table salt is used.

clean, toaster, carbon, fiber, soap, solution

Salt

To clean the toaster with salt, follow the following steps:

  • Through the holes for Bukhankaa, fill the inner cavity of the device with salt almost to the top, leaving to the edge of 0.5-1 cm.
  • Close holes with thick paper and fix it well with cling film wrapped around the case. You can use adhesive tape if you are sure that it will not leave traces of glue.
  • Gently shake the toaster for a few minutes so that the salt particles are knocked down by sticking crumbs.
  • Remove the film and paper, shake off salt.
  • Remove the remaining salts with a vacuum cleaner, clean the walls with a soft brush.
  • After you can wipe the walls with a slightly damp cloth, then dry and leave until completely dry.

Soda

Another remedy with which you can clean the toaster is the baking soda. First cook paste, diluting soda with water to the state of gruel. Use it as follows:

  • Apply paste to pollution with a brush with a soft pile or toothbrush.
  • Withstand 10-15 minutes.
  • Slightly wipe the surface with a brush.
  • Remove the residues of the product with a soft cloth.
  • Wiped with a moisturized napkin, dry towel and dried the device.

How and how to wash on the outside

Когда от крошек внутри прибора избавиться удалось, не лишним будет узнать, как мыть тостер снаружи.

It is enough to wipe the case without strong contaminants with a foam sponge with a drop of detergent for dishes, and then with a damp cloth. The cleaned device is wiped with a dry cloth.

If the outer surface of the toaster has suffered from spray of fat from the stove, it can be washed in several ways:

  • Apply soda paste with a thin layer, after 10 minutes, remove with a damp cloth. For very old fat, try to use hydrogen peroxide instead of water.
  • Make a concentrated solution of citric acid (2 tablespoons of powder for half a glass of water). Process them dirty spots, leave it for 15 minutes, wipe with a sponge moistened in clean water. Instead of citric acid, you can take a half of the lemon and grate the surface with it.
  • Clean the toaster toothpaste. Make sure that there are no abrasive particles in its composition. Apply the paste to the surface with a toothbrush, then mourn with a moisturized cloth. If the case is made of stainless steel, add 1-2 drops of ammonia to give a shine.
  • Wipe the surface with a vinegar solution. For half a glass of water, take 25 ml of 9% vinegar. Rinse with a sponge in 10 minutes.

Advice! For stainless steel products, use special products with a polishing effect. They clean the surface, give radiance and protect against new contaminants.

Using water

Wash the toaster with clean water or with any detergent or cleaning composition is allowed only from the outside, making sure that the liquid does not get into the electrical appliance. Unlike the kettle, the inside of the toaster case is not intended for pouring water, the contacts of heating elements and the electronic “filling” of the electrical device do not have reliable insulation.

Accordingly, to the question of whether it is possible to wash the toaster inside the water, the answer is definitely negative.

Basic rules for leaving the oven

To remove pollution from the internal surfaces of the toaster, special compounds are used, the list of which is indicated by the manufacturer of the electrical appliance in the instructions for use. At home, large table salt, food soda are usually used. Household appliances. vacuum cleaner, hairdryer will help to remove crumbs.

To process the toaster inside, they use:

  • soft brush on a long handle (you can take a toothbrush with synthetic bristles suitable in stiffness);
  • Soft napkins that do not leave fibers on the surface.

Cleaning

Fill with salt with large crystals and swing the input hole. To do this, use a sticky tape or put a cardboard and wrap with tape throughout the product. Start shake, at this time the salt will remove soot, crocheted and fat deposits. Be careful, do not damage the internal details too strong shaking.

Now turn the tape and sprinkle all the salt. Carefully clean from all the remains of salt and dirt. Leaving some part, rust and corrosion may form over time. Do not fill the water inside, a big chance to spoil the device. If you still decide to use water, do not turn on until completely dry.

Better use the second method. Take soda and add water, while mixing. A mixture resembling a paste should form. Now apply on a toothbrush and gently clean the toaster inside from crumbs, dust and other contaminants. In the end, turn over and with the help of a brush, remove all the remains. Before you turn on the device, make sure that there are no remains of the product inside.

To clean the body use a regular sponge and soap solution. That’s all you need to know.

Watch also a video about the cleaning of the toaster:

How to wash from the inside

The care process is to clean the internal and external surfaces. Initially, the product is cleaned from crumbs from the inside.

If the pieces of Bukhankaa are inside the technique for too long, then the optimal environment for the development of dangerous bacteria will be formed. An unpleasant odor will appear that does not allow you to make aromatic toasts. Crumbs even accumulate on a heating spiral, which leads to uneven heating and combustion of Bukhankaa.

You can clean the toaster inside a special brush equipped with a long handle. The tip is equipped with a soft pile. It can be replaced with a toothbrush or drawing brush.

Another method is the use of a conventional hair dryer. Before cleaning the equipment, light mode is turned on at the hairdryer. Thanks to the air stream, all cavities in the toaster are blown. This allows you to eliminate the remains of Bukhankaa.

As soon as the crumbs are removed, the tray begins to clean. He is neatly extracted and wiped with a damp sponge. In the presence of severe pollution, a dishwashing tool is used. After the procedure, the tray wipes dry.

Attention! If the tray is not removed, then at the very beginning of cleaning the toaster is turned over, which allows you to shake out all the pieces of Bukhankaa.

How to remove the carpet

Before washing the toaster inside, everything you need is prepared: coarse.grained salt, brush or toothbrush, thick paper and tape.

Toster cleaning is a simple process that is divided into consistent stages:

  • shakes the crumbs;
  • The inside of the device is filled with salt, and a product with large crystals is selected;
  • Salt is spilled into slots for Bukhankaa;
  • The inputs are closed with thick paper, which is fixed to the walls of the toaster with tape;
  • The product is taken in the hands and carefully grinds, which allows you to eliminate the internal carbon fiber or the remaining fat;
  • After the procedure, salt shakes out of the technique.

Attention! Salt not only copes with pollution, but also ensures the disinfection of the device.

After the cleaning process, you should make sure that there are no salt crystals in the toaster. When exposed to moisture, it can cause rust formation.

If with the help of salt it was not possible to get rid of the carbon fiber, then soda is used. Previously, it is diluted with water to get a thick paste. It easily eliminates dirt on the inner walls of the device. Soda carefully affects the material, so this method does not lead to the formation of scratches.

Soda and water paste are applied with a toothbrush or drawing brush. The product is left on the walls for several hours. After that, they wipe with a brush that should not be too hard. Toothbrushes are ideal, but they should be of high quality so that the villi does not clog in any sections of the equipment. As soon as the entire plaque is removed, the toaster must be washed with a damp cloth. It can be turned on solely after complete drying.

Washing products

An instructions for use are applied to each electrical device. Manufacturers recommend using special tools intended for cleaning equipment. But you can wash the product and folk ways. For this, a vacuum cleaner, hairdryer, soda or salt are used.

Purchased funds are used to wash a removable tray. They can be replaced by dishes for washing dishes.

Is it possible to wash the toaster from the inside with water

Manufacturers do not recommend pouring water into the openings of the device. If the liquid enters the electronic parts of the product, they will stop working. Therefore, it is forbidden to bring the device to a stream of water or pour any purchased liquids into it.

You can not lower the product into a basin filled with liquid, or use too wet a rag with which water drops fall. It is allowed to use exclusively wet rag, which the internal walls of the product are wiped. After this process, the device is carefully dried with a hairdryer and does not turn on within a day.

these rules leads to a short circuit and damage to the product. Therefore, before starting work, recommendations from the manufacturer are studied.

Attention! The easiest way to work with collapsed products in which the pallet is easily pulled out and washed, but it is inserted only after completely drying out.

Cleaner on toaster oven drip pan pt1

How to clean a toaster

Co.author (s): Melissa Maker. Melissa Maker is the host and editor of CleanMyspace, the YouTube channel and the blog with more than 1 million subscribers. Has more than 10 years of professional experience in the field of cleaning, offers useful tips on organizing households.

Number of views of this article: 4638.

Sometimes, during the cleaning process in the kitchen about Toster, they forget, although in fact it needs to be cleaned regularly. Over time, loaf crumbs accumulate inside the toaster, so periodically it must be thoroughly cleaned so that it works properly. First of all, take out a tray for crumbs from the lower compartment and clean it. Then begin to wash the inner and outer surfaces of the toaster.

Remove the shtepsel from the outlet and put the toaster on the work surface. It is very important to de.energize the toaster before cleaning to avoid electric shock. [1] X Source of information after that put a toaster on a wide even surface, for example on a table or bar counter. Cover the working surface with a newspaper so that it is easier to collect crumbs.

Remove the chips tray. Most toasters are equipped with a removable tray, which is called a chip trash. Usually it is quite simple to extract such a tray, but if you fail to do this, refer to the instructions for operating your toaster. [2] X Source of Information

  • You can shake the crumbs from the tray into a pre.spread newspaper. But it is better to do it right above the garbage bucket to get rid of the crumbs immediately.

Rinse the chips for crumbs in warm soap water. Wash the tray in the sink, using warm water and non.abrasive liquid soap. Wash it in the same way as you do with the rest of the dishes. Remove all the sticky crumbs or stains thoroughly, and then put back the tray to the side to dry. [4] X Source of Information

Crusting a non.removable tray for crumbs. If your toaster model cannot be removed for crumbs, just turn the toaster upside down. Gently shake it several times above the newspaper or garbage bucket. So you can get rid of most indecent crumbs. [5] X Source of Information

  • The toothbrush should be only a little wet. If you wet it too much in vinegar, puddles of dirty water can gather at the bottom of the toaster.

Cleaning the outer part of the toaster. Smell a rag in vinegar. Use it to wash the side parts of the toaster. [8] X Source of information use baking soda to carefully wipe the hard.to.truncated spots. In order not to scratch the surface of the toaster, use a non.abrasive sponge or soft rag.

Carefully clean the toaster once a month. About once a month, carry out deep cleaning of the toaster. Clean the chips tray and wipe with vinegar the internal and external parts of the toaster. This will avoid accumulation of a large number of crumbs and other garbage inside. [9] X Source of Information

Shake the crumbs once a week. Once a week, take out a trash for crumbs and shake it over the garbage bucket. If the tray is non.removable, just turn the toaster upside down and shake its contents above the garbage bucket. [10] X Source of Information

Wipe the outer walls of the toaster every day. During daily cleaning in the kitchen, do not neglect the toaster. Wipe it with a wet dampened rag in vinegar or water. This will not allow a large amount of dirt to accumulate on the outer walls of the toaster. [11] X Source of Information

Final stage after cleaning

After the inner part of the toaster was cleared, they proceed to the final stage. The surface of the unit housing also needs to be cleaned. Cleaning will depend on the material from which the case is made.

The plastic surface is cleaned by a damp sponge, on which a small amount of detergent is pre.added. Then take a clean rag, moisten a little with water and wipe the body from a soap solution.

If there are complex pollution in the form of fat spots on the surface, use soda gruel. After all the cleansing actions carried out, the outer surface is wiped dry.

If the case is made of aluminum or stainless steel, then it will require you special accuracy. In addition to getting rid of existing spots, it is also necessary to polish the surface in order to maintain shine. If there are traces of fingers on the housing and other simple spots can be removed using vinegar solution. After surface treatment, the toaster must be wiped with a dry rag.

How To Clean A Toaster

A field of how the unit is cleaned inside and outside, it is necessary to leave it for a while. This will allow him to finally dry. Connect it to the mains and you can not use it until it is completely dry.

The regularity of cleaning and the correct actions during cleaning directly affect the performance of the toaster and its service life. A clean unit not only looks neat, but does not break for a long time and is not subject to fire. The proposed recommendations will help save the toaster in a good and efficient state.

How to wash a toaster inside

Toster is washed with special household chemicals or home remedies, having previously cleared from dirt.

From sticking crumbs

You can clean the toaster inside from the crumbs at home with a mechanical way. a brush, a toothbrush or a hairdryer.

  • Pull out a sliding container for collecting crumbs.
  • Sweep the garbage.
  • Then wipe with a sponge with liquid soap or soft detergent with a sponge.
  • Remove the remnants with a damp cloth.
  • Wipe with a dry soft cloth.
  • Turn the unit over, shake the dried particles on covered with paper, oilcloth, film, or into the sink.
  • Remove the sticky crumbs from the inner details with a brush or brush.

Before cleaning, read the guide to the device. For example, Philips does not recommend turning over and shake devices of its production to remove crumbs.

If the removed trays are absent, and the design allows, you can disassemble the device:

To carefully clean the toaster inside from the crumbs at home, blow out the garbage from the inside with a hairdryer in cold mode, compressed air from a spray can or a vacuum cleaner at a reduced power.

From the haze

You can wash the toaster inside the burning way. with a dry way. coarse.grained salt. She will remove the burnt plaque and disinfect the cavity of the apparatus.

  • Fill in the salt capacity of the device. Leave free space. 2 cm from the edges.
  • Cover with thick paper, fix it with tape or wrap the body with cling film.
  • Shake the unit several times several times.
  • Pour salt.
  • Mix the remains with a brush, brush or blow out a cold stream of hair dryer, a spray with compressed air, a vacuum cleaner.

Remove the salt completely. When roasting toasts, moisture is released. It connects to salt particles and causes corrosion on the surface of the parts.

From dust

You can remove the dust from the inner panels and heating grilles of the device with a slightly moistened napkin, a soft brush, and a toothbrush.

The dust from the apparatus is pulled out by a vacuum cleaner at low power so as not to break the parts, or blown away with a hairdryer.

From fat

Washing a toaster inside from fat plaque is easy to solution with a solution of soda:

  • Mix soda with water to a creamy consistency.
  • Apply to the inner surfaces.
  • Store 10-15 minutes so that the mixture dissolves the fat plaque.
  • Try it with a soft brush if necessary (without pressure).
  • Remove the cleaning composition with a damp squeezed cloth.
  • Drink cotton fabric.

Soda crystals are connected to water and soften, so do not scratch the details.

clean, toaster, carbon, fiber, soap, solution

Is it possible to wash a toaster inside water

The unit cannot be washed under the tap, dip in a container, watering with detergents. The electric unit of the device is not protected from high humidity. When water enters or purifying liquids, the technique will break.

Brushes, brushes, wipes for cleaning should not be wet. They need to be well squeezed out.

Removable parts can be washed with water, and inside Toster is cleaned with specialized compositions or home methods.

Is it possible to wash the toaster from the inside with water?

It’s good if you asked this question before you decide to start washing a toaster under a stream of water. Like any other electrical appliances, this type of technique cannot be exposed to moisture in any form (washing in the sink and dishwasher, soaking). Neglect of the rules of use threatens the failure of the toaster out of order.

In addition, in this case, the device becomes unsafe. All manufacturers prescribe this item in the instructions for use, but, unfortunately, not everyone takes on the work of reading the recommendations of the manufacturer.

In the case of severe pollution, you can wipe the inner surfaces with a damp cloth, and then dry with paper towels. It is better not to use the toaster for some time for securement for some time, giving it completely to dry.

To exclude contact with moisture, the device is not installed next to the sink. Random splashes falling on the turned on toaster can cause a short circuit that can lead to a fire.

Methods of cleaning internal surfaces

It is most convenient to clean the toaster on the table, previously covered with a piece of film or newspaper. No matter how much the technique is polluted, it is impossible to use sharp and metal objects (knives, screwdrivers, knitting knitting needles, skewers).

How to clean the device from crumbs

It is necessary to remove the thumps. As a rule, they remain in the toaster after each use and quickly accumulate. Even if the model has a retractable pallet, this does not help 100% get rid of the remnants of Bukhankaa in the device.

Crumbs stuck between the bars of the grates, stick to the surfaces, creating a favorable environment for the propagation of microorganisms, attracting ants and cockroaches to the house. In addition, when frying the next portion of toasts, the remnants of old Bukhankaa burn out, which causes the appearance of smoke and unpleasant odor.

Step.by.step cleaning at home:

  • Turn the toaster upside down and shake the crumbs to the surface of the table. Most of them will fly independently.
  • Draw the stuck particles using a toothbrush or a small household brush on a long handle.
  • If the crumbs are still in some places, you can get rid of them with a powerful air jet from the hairdryer turned on.

Some use a vacuum cleaner to clean the toaster, claiming that this is the fastest and easiest way. You can try this option, perhaps it will suit you the most.

How to clean a toaster inside from a car

If there is a case inside the toaster, cleaning is complicated. In this case, stone salt or soda will be additionally needed.

In the first case, you must act like this:

  • Pour large salt inside, leaving to the edge of 2 cm.
  • Came the slots for Bukhankaa with strips of adhesive tape or self.adhesive paper.
  • Shock the device for about half a minute. During this time, the pollution will be eliminated.

We recommend: why are the rangers the mosquitoes do not bite: I learned their secret method, now I use it in nature if I forgot the spray

Salt absorbs fat and dirt. After that, it remains only to shake the crystals from the unit. Salt bites should not remain inside, clean their remains with a toothbrush. When using this Toster method, disinfection will be carried out at the same time.

Food soda will help to clean the device even more efficiently. This method can be applied if the salt has lost a strong soil. Mix soda with water until pasta is obtained. Using a toothbrush, apply the composition to contaminated places and gently rub. After such thorough cleaning, the internal surfaces must be wiped with a damp cloth, and then remove the remaining moisture with a dry microfiber cloth.

Now it remains only to wipe the outer surfaces of the toaster. If its walls are made of metal, a rag saturated with table vinegar will help shine. The plastic case is wiped with a napkin moistened in ordinary water or soap solution. Having wiped the toaster dry, he is allowed to stand and finally dry before further use.