What and how to clean the gum in the washing machine automatic

In one not the most beautiful day, downloading the next batch of dirty linen into the washing machine, you can feel an unpleasant shaft, and on the sealing ring to see the dark mold divorces. If the flight does not spread much, the machine will save easily, but in some cases it may be necessary to change some elements, such as a drain hose, tray for washing powder and even the most rubber seal. So that this does not happen, the flare should be periodically cleaned. Today we will look at how you can brush from scale a gum of washing machine machine.

Black mold. a frequent guest is unnecessary economical owners preferring to wash things at low temperatures (30 or 40 degrees) and on fast mode. If you also forget to clean the car from harmful scale and use a lot of rinsing instead of bleaching powders, then the mold will appear fast enough. The reason is simple: at very low temperatures, the device is not disinfected, the microbes do not die.

If you constantly wash at temperatures below 60 degrees, then the washing machine will inevitably cover mold.

Mold may also appear due to the lack of chemically active substances like a bleach. Surplus of the ringer for linen can create a mucous fall, which is an excellent place to live fungi.Dampness and warm. great prerequisites for the appearance of mold.

Options for removing scale

In plumbing water of mineral impurities contributes to the formation of scale, settling on the gum. In this case, the machine can be cleaned, using a mitigating water “Calgon”.

Do not everyone know that the porous structure of the scale is a favorable medium for reproduction of mold. The use of some folk remedies helps to eliminate the tax.

  • The drum should be filled with 100-200 g. citric acid (depending on the intensity of scale) and include the longest program, heating water to 60 degrees. Then it is worth installing the “rinse” mode and better wash the balances of scale. At the end, we definitely wipe the cuff dry.
  • Instead of lemonic acid take 1l. White 9-% vinegar, but many annoying an unpleasant acetic smell, remaining after washing with such a means.
  • “Antinakipin” is also effective in the fight against the clay formed on the cuff. Instructions for use there is a fundamental packaging.

Rules for cleaning gum

Before you start cleaning the dirt on a rubber band, you must disable the technique from the mains. To work, you will need tools and devices (rag, sponge, brush) for cleaning, as well as hand protection gloves.

Important! Cannot use solvents or abrasive substances.

The best time for processing the seal. immediately after washing. Rubber should be washed from the outside. Then, turn the cuff and clean the depressions under the fold.

Clean the rubber band is recommended in two stages: local application and subsequent washing without loading. If mold or scale is outside, then it is present on the inner details. At the end of the procedure, dry surfaces.

How and what to clean the rubber seal in the drum of the washing machine

Cleaning the cuff must be regular. Otherwise, dirt will begin to fall on clothes, an unpleasant smell will appear indoors.

Before conducting manipulations, disconnect the washing machine from the electrical network.

If you use strongly smelling substances, open the door to the bathroom, swipe open windows.

Wear protective gloves, closed clothes so that aggressive chemicals are not on the skin. If cleaning products fall into the eyes either on the skin, immediately rinse the affected area with plenty of warm water.

The sealer can be washed using different types of domestic and professional chemicals.

Before cleaning the elastic band in the drum of the washing machine, it is necessary to release a standard machine or vertical loading from linen, put on gloves and inspect the unit. The cause of pollution can be mold, scale, rust, limescale. Black mucous stains are accompanied by an unpleasant smell, remove the divorces by home recipes is not always possible.

clean, washing, machine, automatic

From mold

Mold on rubber machines can be cleaned with a sulfate solution. On 20 g of substance for cleaning the washing device there is 1 liter of water. For cooking, you need to take a glass jar, pour hot liquid into it, add the desired amount of powder.

Cupid can not be breed in metal and enameled dishes.

We offer to familiarize yourself with the wash of woolen things in the washing machine

Clean the all seal with cooked solution, leave the washing machine for a day for complete drying, thoroughly wash the rubber detergent for dishes. This method is suitable for aggregates whose sealant is poorly polluted. It is possible to completely remove the mold with the items, removing the cuff, processing the body of the machine under it.

clean, washing, machine, automatic

Washing Cuff attached to the enclosure clips-latches. For them, you need to pull, remove the rubber, treat it with a cleaning powder in a pelvis with warm water. Place under the element of the mechanism to clean, wipe. Dry cuff dry rag or paper napkin.

Some machines have a different cuff mount principle. Before dismantling the details you need to explore the instructions for the device.

A good substance to clean the washing rubber seal is the monard extract. The drug can be found in the pharmacy. The tool is bred in distilled water (on 15 ml of monards. 200 ml of liquid), overflow into the sprayer, is applied to the dirt without flushing.

After applying any composition, you will need to run a washing automatic machine to a long program at a maximum temperature (95 degrees), after the cycle is completed, the dry drum should be wiped, leave it open.

From scale

From scale rubber can be cleaned by household chemicals or folk recipes.

The shopping facilities have one minus. they spoil the details. Use substances only in extreme cases following the instructions.

Machine machine must be cleaned with citric acid every four months:

  • In the compartment for washing powder, pour 100 grams of funds;
  • set the mode at high temperatures;
  • Launch a long wash without lingerie.

The method is good as preventing the formation of scale in the car and mucus on rubber.

A vinegar is coping with the problem of mold and salt maternity. They can clean the seal of the washing unit, remove the unpleasant odor:

  • In the underwear compartment pour two glasses of vinegar;
  • put on a long wash, choose the maximum temperature;
  • Five minutes later, you need to put the mode pause for an hour;
  • Remove the car with a pause, wait for the ending of the washing;
  • run a short program;
  • Clear all parts of the washing device with a paper towel or a dry cloth;
  • leave with an open door to complete rubber drying.

Dampness and mold. the consequences of poor care of the washing machine. It is important to establish the location of the localization of the smell. If it is not clear where it smells, it is worth calling the masters to reveal the reason.

Clean the rubber in the drum is recommended using household chemicals containing a non-aggressive chlorine. Suitable recipe from vinegar and citric acid.

Sometimes get rid of the unpleasant smell in the car helps flavored washing powders. This method only masks the problem.

Clean the rubber using tablets for dishwashers. 6 pieces fall asleep in the drum, launch a long mode at the maximum temperature, in the middle of the cycle, they pause for three hours. If this function is not in the machine, you can pull the plug from the outlet. After 3 hours, the washing resume. Recommended to start the additional rinse mode.

Effective tools for cleaning sealing gum

Solving how and dryly, the rubber band of the washing machine. automatic, preference is given to universal compositions to eliminate bacterial plates and sharpness effect. Specialized specialized products for home appliances are enjoyed. At the same time, they give good results and folk methods of cleaning the rim of the drum based on breeding agents.

Specialized

Manufacturers of relevant products offer a large range of solutions. Choosing than and to clean the elastic band of the washer, consider the following options:

  • Liquid compounds for sanitary processing of the seal and tray. The mixture contains active substances to combat pollution, rust, scale, fungus. Separate options are also able to neutralize unpleasant odors, designed to eliminate the effect of sharpness;
  • Powders and granulated cleaning agents. Specialized mixtures provide efficient removal of pollution, scale, mold dispute. They are needed to prevent mucus formation on a rubber band, a favorable environment for the development of microbes;
  • Tablets in the form of a pressed mixture. The composition provides for chloride substances or biocomponents, is a concentrated form of specialized products to combat harmful microorganisms and a specific odor.

Cleaning gum in a washing machine Concentrated washing powder with inclusions of bleaching granules can neutralize the risk of developing pathogenic microflora in the cavities of the unit. If you regularly use phosphate detergents, you will not need additional disinfection of the internal surfaces of the gum.

Homemade means

To eliminate alkaline plaque on the surfaces of the rim apply of an acidic heater with an acidic environment. The people practiced a number of ways to clean the mud under rubber drum using affordable products:

  • Table vinegar. The solution in water 1: 3 is used to treat surfaces;
  • hydrogen peroxide or other analogues of pharmacy antiseptics. Substances are used to neutralize fungal colonies;
  • baking soda. Mustice is easy to wash the precipitation and bacterial collapse, also the soda contributes to the elimination of unpleasant fragrances;
  • lemon acid. It is considered an effective means of scale, yellow plaque, harmful microflora;
  • Solution of boric acid. 10 g of dry matter is dissolved in 0.5 liters of boiling water, used to eliminate fungus, mold, sharpness;
  • Monarda extract. The liquid helps in the fight against microbes on the internal planes of the drum cuff;
  • Copper Municipal. Dissolve 20 g of drug in 0.5 l of water and treated with fungus rubber rim.

To prevent the development of microflora and eliminate unsightly odors apply essential oils. Limited with low doses, given that the concentrated composition negatively affects the integrity of the structure of the sealing gum and plastic parts.

Choosing a tool

To care for the sealing cuff, the machine machine are suitable for various means of household chemicals. It is important that they have not only whitening, deodorizing and cleansing properties, but also were able to cope with mold and bacteria.

In your washing machine there is a mold?

Baking soda

Soda purify the cuff manually. suitable cooked self-cooked cashem or soap solution. In the first case, 2-3 tablespoons of soda are connected with a small amount of water until the casher is obtained.

The tool is applied to the kitchen sponge and wipe the gum throughout the perimeter, thoroughly treating the inner surface.

The second option. mix a spoonful of soda with gel or dishwashing liquid. Soapy, work in the same way. they are applied to pollution and carefully rub. Need to give soda for some time to act (about half an hour), and then wash off the residues of the substance with clean water.

Important! In the process of washing, it is prohibited too stretching the gum, otherwise the tightness of the machine machine will break.

Antibacterial and chlorine-containing means

This group of funds includes household chemicals containing disinfecting additives to eliminate bacteria, viruses and mold. They do not have to be intended for the washing machine.

How To Clean The Detergent Drawer On Your Washing Machine | AEG

Universal means to care for plumbing, cafeter, working surfaces in the kitchen:

Advice! Choose the form of release that you will be convenient. spray, gel or liquid. The drug is applied to an elastic band with a washcloth or a damp cloth, and after 30-60 minutes wash off with mud.

Copper Municipal

The sulfuric particulate copper is particularly popular in the country of dachnings to combat pests of trees and shrubs. In everyday life also turn out to be useful antiseptic, antifungal and disinfectant fluid properties.

  • Prepare cleaning solution. 30 g of substance for 1 liter of pure water.
  • Moisten a rag or a washcloth in the liquid and handle the cuffs, not missing a centimeter.
  • Leave the drug “work” about a day.
  • After a day, turn on the machine to fast washing mode.
  • At the end of the process, wipe the gum dry and leave the door open so that the surfaces are finally dried.

Application of household chemicals

Manufacturers are constantly expanding the line of funds aimed at combating mold in the rubber bands of washing machines, but the housewives assure that “Domasetos” copes with the problem. Apply a solution to the surface of the gum, then wipe it well with a sponge. If you do not get rinsed all the folds. remove the cuff.

“White” can also wash the gum if adhere to our instructions:

  • Remove as much pollution with a wet napkin.
  • Moisten a sponge to the tool, wipe the cuff from the inside.
  • Wipe the drum washing machine.
  • Close the door, wait half an hour.
  • Turn on the washer in rinsing mode.

It is possible that in the launched cases will have to repeat the procedure, but more often “whiteness” copes with mold on the rubber band from once.

What you need to do so that the problems no longer appear

In fact, keep your washing machine in working condition is very simple. enough to keep some useful tips to help avoid possible trouble and will extend the life of its operation.

First of all, you need to use equipment for washing and powders of only good quality. Usually this is the means of the average price category;

It is necessary to strictly dose the amount of powder that enters cells for detergents, since its large amount is poorly reflected in the general condition of the machine;

After completion of the washing, you need to withdraw wet underwear from the drum as quickly as possible, as being raw, it can become a carrier of malicious bacteria.

Then you need to walk along its inner composite solution of soap, which will clean the surface of the drum from the accumulated garbage and dirt. In the free time, the cover of the washing machine is to keep the most open as possible;

At least once a month it is necessary to apply the built-in automatic cleaning function, which will independently go through all susceptible to the danger places. If it uses hard water, it is necessary to soften with special pills.

As you can see, there is no such problem that it was impossible to fix. Including and how to wash rubber in a washing machine. It is enough to keep track of your washing machine, sometimes cleaning it from the accumulated garbage, and it will last you for a long time without delivering any difficulties and fungal pollution.