What you need to know about replacing the bobbin on the sewing machine

Working on the sewing machine begins with the refueling of the upper and lower thread. With the slightest inaccuracies in the implementation of such a procedure, it will not be able to achieve a smooth and beautiful stitch. The machine either will not sew at all, or will tear the thread, form the seam with passes and loops protruding over the cloth.

We will tell you how much the right to choose a bobbin, how to wind up a thread on it, which nuances should pay attention to the refueling. From our article you will also learn about what defects and malfunctions in the work of the machine can occur due to improper bobbing installation, and how to eliminate them.

Review models

The Russian industry was not very original in constructing sewing equipment. The most popular manual machine. PMZ (or “Podolsk”). actually repeats the design of the Singer technology, by the license of which the equipment was produced in those years even in China. For the USSR, the emergence of Creation of Podolish masters was very by the way. The young Russian industry needed mechanization of work Shve.

It should be noted that the PMZ plant was founded in 1902, as the consulate of the company “Zinger”, and by 1913 the volume of production reached 2000 units of equipment. The current name has received an enterprise after nationalization, in the 30s of the 20th century. From the same time, the unique details of the German brand began to be replaced by Russian.

The most popular was the model “Podolsk 2m” with manual drive and the highest quality of parts.

Chinese sewing machine Buterfly. “twin” products of PMZ. also produced under license Singer. The model is capable of making only 1 line type in a straight line. Its difference is not very large, but still there is: the end of the cap spools will not turn on the left, but for the right. If there is a sewing experience on “Podolsk” to master the buuterfly will not be difficult.

“Seagull 2”. one of the first serial machines similar to modern models. It was produced with a foot and manual drive, skill to make straight seams and zigzag, but did not have a reverse.

thread, manual, sewing, machine

See also  How to change brushes in the washing machine indie

HOW TO: THREAD A DOMESTIC / MANUAL SEWING MACHINE

Minerva. a popular manual machine produced in Czechoslovakia. It is aimed only to create a straight line, has adjustment along the length of stitches, and according to its own design is actually similar to the standard Singer models.

In addition, in the middle of manual models, the German Kohler and Csepel 30 Hungarian production can be noted.

Tips for car care

Many people mistakenly believe that the sewing machine does not require much attention to care, and that even in a bad condition, she will be able to perform their main function. sew. It’s far wrong. The sewing machine will serve you much longer and will sew much faster and quieter, if you perform simple rules for caring for it.

  • Periodically, lubricate the inner parts with special oil, which comes with the apparatus. The frequency of the procedure is once every six months.
  • Pick threads and needle competently. Watch the needle corresponding to the type of fabric with which work is underway.
  • Clean the internal mechanisms using a special brush.

It is worth considering the fact that working with such types of fabrics as knitwear, fur and wool, the above procedures should be carried out slightly more often than usual.

Correct order of refueling threads

This process will be varied depending on the type of machine. In modern devices there are detailed instructions, how to correctly fill the threads into the sewing machine, and the devices themselves are arranged so that you can intuitively guess how to do everything. But with rotary type machines, difficulties arise, so you will present in detail two instructions:

Refueling upper thread

  • Thread from the coil through the mounting of the device.
  • Thread spend the thread tension in the regulator and start in the compensation spring, which externally resembles a hook.
  • Thread to turn to the hole of the filamentine, to bring it out and spend on the existing mount, then in the needle.

Refueling lower thread

  • The bottom thread is not covered with a coil, but on a bobbin.
  • Power bobbin in a punk cap, while the thread must be filled under the spring plate.
  • Check the tension of the thread. Certain tension is set under the model of the machine.

Order repair and maintenance of sewing machines!

If the refueling procedure can be sorted out independently, then with many intricacies of the setting or technical breakdowns to do it much more difficult. In addition, there is a risk of new troubleshooting as a result of unqualified repair attempts. To ensure that you solve the problem, contact us! Applications for departure masters are accepted by calling 8 (495) 745-20-50, e-mail, or through feedback. We work without days off, from 8:00 to 23:00.

See also  Clear powder compartment in a washing machine

Many needlewomen in the house have sewing machines of an old type. Some such technique go to the inheritance from moms or grandmothers, but how to work with it, not everyone knows, but the instructions for use have long been lost. They fully cope with the tasks assigned to them and remains to figure out how to fill the thread into the manual sewing machine.

Netter type technique has a similar thread broaching scheme. The difference lies in how the thread is performed on the machine.

IMPORTANT. The thread in the needle is in the horror, it is located along the needle. I can determine it by spending a finger on the needle.

Follow the equipment is necessary according to the scheme that is shown on the lid. For rotary machines there is its own scheme, because these are the aggregates of the old sample.

Algorithm refueling into the old car, the following:

  • Fix the coil.
  • Extremely carefully thread the nite element in the tensioner, which is located on top.
  • Output it through the spring. She looks like a hook.
  • In the thread in the Nitheeod, it also has a hook for this.
  • Now it remains to go to the needle retainer.

The technique of this type is applied fork, it allows you to throw a thread on yourself.

How to fill the bottom thread

And I’ll start with the bottom gas station. To do this, take out a sewing machine a bobbing cap with a bobbin inserted into it. Your sewing machine can be with a horizontal shuttle, but in both types of machines, the place for the bottom filling of the thread has a bobbing cap and a bobbin. So big difference how to fill the thread into the sewing machine with a horizontal or vertical shuttle, there is no.

Now you need to wind on the bobbin necessary for sewing the amount of thread. At the same time focus on the sewing volume. If you sew a lot, then you need to fill the bobbin thread to the edges. If you need to make a couple of lines, there is enough less than half a bobbin.

I pull the flywheel towards the sewing machine.

I install a thread on the coil rod, I spend a thread through the nitenastor, I do the end of the thread through the bobbin hole and winding the thread while manually by making three four turns.

See also  What is a steam function in a washing machine

After I fixed the thread on the bobbin cap, I set the cap on the spindle winding and we assume it towards the flywheel. Now you can turn on the sewing machine, click on the pedal and the thread will start on the bobbing.

After I wrapped the required number, stop the flywheel. Moving the spindle in the direction of the flywheel, cutting the thread, take off the spindle bar)

To enjoy work, as well as avoid problems while working, it is worth thoroughly examine the instructions for refueling a sewing machine, because it will depend not only the quality of the sewn product, but also the life of the device will depend.

Without refueling, no sewing machine can start work. Thread is the component, without which it is impossible to sew the same or different types of matter: in this case, it would have to resort to other methods and technologies different from sewing.

Order repair and maintenance of sewing machines!

If the refueling procedure can be sorted out independently, then with many intricacies of the setting or technical breakdowns to do it much more difficult. In addition, there is a risk of new troubleshooting as a result of unqualified repair attempts. To ensure that you solve the problem, contact us! Applications for departure masters are accepted by calling 8 (495) 745-20-50, e-mail, or through feedback. We work without days off, from 8:00 to 23:00.

This process will be varied depending on the type of machine. In modern devices there are detailed instructions, how to correctly fill the threads into the sewing machine, and the devices themselves are arranged so that you can intuitively guess how to do everything. But with rotary type machines, difficulties arise, so you will present in detail two instructions:

Refueling upper thread

  • Thread from the coil through the mounting of the device.
  • Thread spend the thread tension in the regulator and start in the compensation spring, which externally resembles a hook.
  • Thread to turn to the hole of the filamentine, to bring it out and spend on the existing mount, then in the needle.

In some models, the cars instead of the filament holder are a fork. In this case, you just need to impose a thread on this fork, and not in the hole.

thread, manual, sewing, machine