How to use a gorenje gas

To get acquainted with the instructions, select the model from the list above, click on it with the left mouse button. On the page that opened:

How to use a gas oven

Living fire in apartment space. How to use a gas oven correctly, so that in joy and without tension. Who does not like to eat well. And to eat well. even better. But, alas, electric driving is not able to provide dishes with a taste that will cover our taste receptors with a sweet languor. Unlike gas stove. What kind of beast is this and how to win it? Here is a brief instruction for those who are looking for an answer to the question: “How to use a gas oven?””.

Button “Start” or how to “start” a gas unit

When an unfamiliar subject of household appliances appears in the house, you:

  • or thoroughly study the instructions, and then act;
  • or turn on the “fifth feeling”, set up “oracle” or use the “scientific poke method”.

And, you see, the outcome of the scenario is obvious. They bring you technology. Install. Set up. Leaving. And you are left with her alone. Here the most interesting begins.

Subsequent actions are comparable except that the dancing of African shamans. During them, they also puff out, buzz, mumble and twist. So, in order to protect you and your nerves from an unsuccessful acquaintance with such a type of technology as an oven, we will reveal a terrible secret. the secret of its inclusion.

Как почистить газовую плиту Gorenje с функцией газ-контроля конфорок. How do you clean a gasstove

The gas stove consists of two parts. the hob and ovens. It can be dependent and independent. The dependent plate has one control body for the oven and the hob, independent. separate.

To turn on the oven, open it. If necessary, turn on the lighting (there is a special button on the control organ). Find a hole (usually above the door joint). Light a match and bring it to the focus of an opening.

Now press the corresponding button and wait. If everything is in order with the gas supply, no problem will arise with the inclusion of the oven. In terms of turning on with an electric oven is easier, but the gas is not inferior, although it is necessary to adopt.

Important:

Mirot of the hostess. The governing body in a gas stove is most often expressed by drowned handles (mechanical). Therefore, in order to turn on the stove (oven), you need to easily press the handle inside and turn clockwise. And to turn off. turn against it without clicking.

And even the supply of gas under control

Modern gas units cannot but rejoice. Of course, there are much less functions in them than in electrical, but quality and reliability are at the highest level. Take, for example, at least the Slovenian oven Gorenje.

Thanks to their quality and pleasant price, they have long filled the whole of Europe. Particularly large export of products is sent to Germany. And the Germans know a lot about.

So, modern models of gas oven cabinets include useful modes, including “gas supply control”. You press and hold a special button for three seconds after the flame has formed, and only then release. If you do not do this, the fire fades away.

About the pressure of gas

Planning a grand move to a new building? You can forget about the gas stove. Unfortunately, in modern residential skyscrapers, gas supply is not possible. What can I say, even in old 5-9 floor houses you often come across the fact that gas simply “does not reach” the apartment due to low pressure.

Подключение электроплиты Gorenje | Connecting the Gorenje electric stove

This is where the creativity of housewives is manifested. Some kindle the fire with a branch from a broom, and some make a paper tourniquet. If you are “lucky” to face the problem of low gas pressure, first go down it.

After that, roll the paper into a tube, soak the end with water, which you hold in your hand and set the other. This “miracle design” light the oven. Do this only as a last resort if there is a need for this. If there is no one, call the gazeler. There is nothing to try on a “headache” in the form of other people’s responsibilities.

If there are no matches at hand

If you have ended matches than to light a fire? Use the usual lighter. The principle is the same: lower the gas, bring the lighter to the hole, open the fire and that’s it. But do not forget that this method is dangerous.

After you light the oven, be sure to ventilate the room. “Activating” the hob with a lighter for smokers. also a minute business. The main thing is to act carefully so as not to burn yourself.

Important:

Mirot of the hostess. The above methods of “mining of fire” are life.threatening for life. You can use them, but we do not recommend this. It is better to immediately buy a household lighter with a stove, or not be too lazy and go for matches.

See also. how to choose a desktop electric oven for a home

And what next

Congratulations! You turned on the gas, and, therefore, took the first step on the path of becoming a cook. How to use a gas oven for cooking? Here it already depends on the requirements that the dish makes.

If you carefully twist the burners clockwise, you will see how the fire increases on the hob and in the oven. But here it is better without initiative. To make delicious and healthy food, follow the recipe (everything from “A” to “I” is painted). And before that, do not forget to read again how to use a gas oven.

Recommendations for installing a kitchen slab

How to connect Gorenje gas stove

The connection to the main networks of gas devices is carried out only by employees of service services with appropriate permits. After the work is completed, an appropriate entry is made in the service book.

Gorenje plates are supplied with tuning for natural gas n or e (20 or 25 MBAR) or on liquefied gas (50 or 30 MBAR), this is indicated on the wool. If the network conditions do not correspond to the settings, then the specialist will reconfigure the device with the gas type used: he will replace the nozzles and adjust the costs of the consumption. Please note that after this valves and nozzles must be sealed and a piece of paper with new parameters is glued over the factory data.

On the right side there is a gas pipeline tube for connecting to a gas source with an external thread EN ISO 228-1 or EN 10226-1/-2, also included adapter for liquefied gas and non-metallic gasket (re-use is prohibited, permissible deformation-25%).

Connection is made using certified flexible rubber or metal hoses. In the first case, you can not lay the hose, as shown in the figure in position A so that it does not hurt from heating. You can place metal.

In order for lighting and electric lighting in the gas stove, you need to connect to the electric network. To do this, the cord is attached to the terminal box, which is located on the back of the device and should be closed after work.

After connection, the specialist checks all the burners, the operation of gas control and electric lighting. Gas should burn with a blue-green flame.

How to connect an electric stove Gorenje

The manufacturer recommends installing using the employees of the service center, only in this case the device will operate a guarantee of 1 year plus a year of service. Make sure that a mark is put in the warranty coupon.

A three-phase connection is recommended using a 5 × 1.5 mm 2 annex of the H05VV-F5G-1.5 type (previously CGLG 5CX1.5), (3 × 16 A fuse).

In case of single-phase connection, use the H05VV-F3G-4 cable (previously GGLG 3CX4), (fuse 32-40 A depending on the type). The ends of the wires are squeezed in terminals, fastened with screws, the lid closes.

How to connect an electric stove Gorenje

The manufacturer recommends installing using the employees of the service center, only in this case the device will operate a guarantee of 1 year plus a year of service. Make sure that a mark is put in the warranty coupon.

A three-phase connection is recommended using a 5 × 1.5 mm 2 annex of the H05VV-F5G-1.5 type (previously CGLG 5CX1.5), (3 × 16 A fuse).

In case of single-phase connection, use the H05VV-F3G-4 cable (previously GGLG 3CX4), (fuse 32-40 A depending on the type). The ends of the wires are squeezed in terminals, fastened with screws, the lid closes.

How to enable a combustion stove

The first inclusion process is quite simple. Remove transport packaging and baking sheet from the oven, wipe the surfaces with a damp cloth.

Turn on cast-iron burners for 3-5 minutes for maximum power so that they are burned, the protective coating forms a durable layer. You don’t need to put dishes. At the first heating, smoke and characteristic smell of a new device may appear. The kitchen needs to be ventilated.

Gas burners are turned on by turning rotation. Electric fee is made by pressing the handle or button depending on the model. The thermostat should be in the “Big Flame” position. The spark slips between the candle and the burner and sets it on gas. Hold the switch in a state of about 5 seconds so that the flame stabilizes. If after 15 seconds the gas does not light up, then turn the handle by 0 and wait for at least 1 minute. Then repeat.

The zones of heating of glass.ceramic models of the plates are turned on by turning the regulator. You do not need to warm them up, you can immediately put the dishes and cook.

The EIT6351XPD induction model is equipped with recovered switches to control the oven. On the hob is a touch control panel, where heating is set by pressing on and

Recommendations for installing a kitchen slab

How to connect Gorenje gas stove

The connection to the main networks of gas devices is carried out only by employees of service services with appropriate permits. After the work is completed, an appropriate entry is made in the service book.

Gorenje plates are supplied with tuning for natural gas n or e (20 or 25 MBAR) or on liquefied gas (50 or 30 MBAR), this is indicated on the wool. If the network conditions do not correspond to the settings, then the specialist will reconfigure the device with the gas type used: he will replace the nozzles and adjust the costs of the consumption. Please note that after this valves and nozzles must be sealed and a piece of paper with new parameters is glued over the factory data.

On the right side there is a gas pipeline tube for connecting to a gas source with an external thread EN ISO 228-1 or EN 10226-1/-2, also included adapter for liquefied gas and non-metallic gasket (re-use is prohibited, permissible deformation-25%).

Connection is made using certified flexible rubber or metal hoses. In the first case, you can not lay the hose, as shown in the figure in position A so that it does not hurt from heating. You can place metal.

In order for lighting and electric lighting in the gas stove, you need to connect to the electric network. To do this, the cord is attached to the terminal box, which is located on the back of the device and should be closed after work.

After connection, the specialist checks all the burners, the operation of gas control and electric lighting. Gas should burn with a blue-green flame.

How to connect an electric stove Gorenje

The manufacturer recommends installing using the employees of the service center, only in this case the device will operate a guarantee of 1 year plus a year of service. Make sure that a mark is put in the warranty coupon.

A three-phase connection is recommended using a 5 × 1.5 mm 2 annex of the H05VV-F5G-1.5 type (previously CGLG 5CX1.5), (3 × 16 A fuse).

In case of single-phase connection, use the H05VV-F3G-4 cable (previously GGLG 3CX4), (fuse 32-40 A depending on the type). The ends of the wires are squeezed in terminals, fastened with screws, the lid closes.

How to enable a gas stove

Gas stoves have firmly entered the life of a modern person. This category of household appliances is an indispensable assistant for home and professional cuisine. The modern market presents a wide variety of models for cooking with a wide range of capabilities. over, not everyone is familiar with the rules of operation of equipment, which increases the likelihood of a breakdown or violation of the unit work. To avoid this, it is recommended to familiarize yourself with the instructions from the manufacturer.

How to turn on a gas stove correctly?

Gas slabs are in great demand among consumers. The main reason is rapid heating and a simple format of operation.

install, gorenje, stove, plate

How to light a stove?

Before turning on the stove, you need to make sure that nothing prevents you from. To do this, roll up sleeves, remove hair behind your back, such measures will help to avoid the occurrence of a fire. The same applies to jewelry, it is better to remove them.

After that, you need to turn the adjustment handle to light the burner. Most modern models are equipped with regulatory handles that allow you to light a burner. In total, several modes are presented: weak, medium, strong fire. Turn the handle and wait for the appearance of fire, then adjust it to the temperature necessary for cooking food.

An alternative option is to turn on the stove in manual mode. Most modern models can be lit using a match or lighter, while it is recommended to be careful. First you need to bring a match or lighter to the center of the burner and wait for the gas supply, after which fire will appear. It is recommended to immediately remove the hands from the burner in order to avoid obtaining a burn.

How to enable the oven in a gas stove?

The procedure for turning on the oven is more difficult compared to the burner. The main reason is a limited review, barred in the pallet, to turn on the oven there is a small hole through which gas is supplied. In this regard, there are a number of difficulties associated with the inclusion itself, after which it is difficult to make sure that all the torches caught fire.

From the point of view of security, the most optimal option is models with the built.in function of turning on the oven, the procedure is carried out through the supply of sparks for the flame. For manual inclusion, you can use electric or pneumatic lighters with which you can serve a spark in the hole. This approach allows you to ensure security and burn yourself. The simplest and most affordable way is to use matches.

Important! When using obsolete wooden matches, pieces of paper, it is recommended to be careful and remove the hand when it appears so as not to get a burn.

Possible problems

Practice shows that all problems and breakdowns are associated with violation of the rules of operation of the equipment, their ignoring leads to malfunctions. One of the most common problems, according to experts, is a breakdown of an electric weapon. Also, in some cases, the gas burner ceases to turn on or during its work it may fade away, which creates a dangerous situation. The main reason is wear or garbage in detail. Another problem is a malfunction of the gas control function, which also leads to the attenuation of the burner. To resolve problems, it is recommended to seek help from the service center, where experts will reveal the cause of the malfunction and eliminate it in a short time with a guarantee of a qualitative result.

Safety precautions

When working with a gas stove, it is necessary that the hands are dry, you need to hold on not by the cord, but for the fork.

It is not recommended to move away from the stove until the food is cooked.

To remove the finished dish from the stove, it is necessary to use a towel or a special tack, this will avoid burns.

To cook food, you need to use only suitable dishes.

When the smell appears, you must first disconnect the stove.

What can not be done

  • Use the stove as a place for drying linen, in which case the likelihood of a fire increases.
  • Leave the on the included stove unattended, this will minimize the gas leak and prevent a fire.
  • Small children who do not know how to handle the device should not be allowed to the stove.
  • The plate cannot be used as an alternative to the heater, the equipment is not intended for such purposes.
  • It is forbidden to carry out independent installation and replacement of gas equipment, this should be done by qualified specialists.

Attention! Independent installation can lead to a gas leak and violations in the operation of the unit and the entire system, therefore it is recommended to seek help from specialists.

Symptoms of gas poisoning

Natural gas has neither color nor smell, so manufacturers began to add substances to it that allow you to fix the gas leak and avoid poisoning in everyday life.

In the risk zone are people who have a reduced sensitivity to the smells, as the gas entering the lungs leads to poisoning. This problem is relevant for closed rooms.

Among the main symptoms of gas poisoning, one can distinguish:

Important! For the prevention of gas departure, it is recommended to carry out regular ventilation of the room.

How to unlock the combustion plate

Blocking the hob is possible for induction EIT6351XPD, EIT6341WD, EIT5351WD to remove the block, you need to click on the “Key” symbol.

ICONLED models are equipped with a protective lock function to avoid random changes in settings, for example, by children. To turn on, you need to click and hold the watch sensor for 5 seconds. The inscription “LOC” will appear on the display for 5 seconds.

  • If protective blocking is enabled and not one of the functions is installed except the current time, then the oven will not work.
  • If you turn on the lock after installing one of the functions of the programmer, the oven will work, but it will be impossible to change the parameters of its work.

How to set up an electronic gas stove programmer

How to set time on a gas programmer we have already described above. You can also program the duration of any of the burners. Click on the button and select the desired (blows the indicator), set the right time buttons, for example, 10 minutes. After a few seconds, the burner indicator will go out and will return the current time, and the programmer will start the countdown. After the set time, the gas supply to the burner will stop and a short sound signal will be heard and will be heard. To cancel the timer, you need to set the time 0:00 on the desired burner.

For the oven, you can program the duration of cooking only for the lower burner of the oven, but not for the grill. All settings are made in the same way, only you need to choose the oven burner.

The maximum time for which you can program work for burners of the hob and oven. 3 hours!

The warning timer works regardless of whether you use the stove. You need to select the corresponding button and set the time, after it will be heard the sound signal and the indicator will go out. All this time on the display is displayed the current time of the day, and find out how much it remains to the end, you can press the button.

How to install Gorenje gas stove

The distance between the stove and the hood should not be

less than indicated in the instructions for the installation of hoods.

Veneer and other materials of neighboring kitchen furniture and

neighboring surfaces (floor, rear and side kitchen walls) should be thermal.resistant (90 ° C), otherwise the lower heat resistance of materials can lead to their deformation and color change.

Alignment and additional stand (in some models) the height of the plate with a stand. 90 cm, without a stand. 85 cm. From the back of the stand on the left and right there are

Two wheels that facilitate the movement of the slab. On the front of the stand on the left and right there are two adjustable legs, with which you can level the plate horizontally and fit the upper edge of the stove to one level with neighboring furniture. For access to adjustable legs, remove the box box. Twist your legs until the device is leveled horizontally. If the plate is slightly tilted from yourself, it will be easier to twist the legs.

Removing an additional stand wind up four screws, with which the stand is attached to the side walls of the stove. In this case, rearrange adjustable legs from a stand to the plate in the base of the plate on the left and right. Comers the stove as described above.

Some plates have four adjustable legs

(two in front and back), also designed to align the stove on the uneven floor and fit the upper edge of the stove under one level with neighboring furniture.

Factory setting gas devices are tested and marked with a sign

Gas devices are delivered with setting up for

Natural gas of the type H or E (20 or 13 MBAR) or on liquefied gas (50 or 30 MBAR). The gas settings settings are indicated in the factory plate, which is located below and visible with the open door open.

As you can see, today there are three main types of flexible carts for gas equipment. At the moment, the most common are ordinary products with a metal braid. This is due to the fact that this particular type has the optimal price-quality ratio.

Of course, rubber materials are cheaper, but also less durable. As for the third type, their high price is due to their high operational indicators, as well as the fact that a large number of products are produced abroad.

How to connect a gas pipe

Flexible hoses to connect a gas pipe there are several varieties. Not all of them are equally good, so let’s understand the topic in more detail.

Type of hose, photo Description
Rubber hose reinforced with tissue threads Rubber options are considered the most affordable of other analogues. for half a meter of such a hose you will have to pay 120 on average. The product immediately includes nuts and gaskets for connecting equipment. These products have the following characteristics: 1. The service life does not exceed 5 years. The quality of the product is very dependent on the quality of the original raw materials. Therefore, these hoses are inexpensive. You can use them as a temporary solution, when nothing else was at hand. 2. Such a hose does not have a sufficient level of stiffness, which contributes to its accelerated destruction. 3. He does not tolerate the effects of high temperatures, so make sure that it is far from the gas burner. four. The length of the product can vary from 0.4 to 7 meters.
Oxygen hose Using oxygen hoses to use today for connecting gas installations, since they do not comply with security standards. the material reacts with oils and quickly begins to collapse. However, according to the old fashioned way, many continue to use them. if you do this, then only in the form of a temporary measure. These products: 1. They are sold by bays and do not have an mounted tip, so in addition to the hose itself, you will need to buy two fittings with gaskets. 2. They can withstand high pressure. up to 20 atmospheres, although this is not at all in our gas networks. 3. It is very important that rubber does not conduct electricity. It must be remembered that the rubber cannot be painted, the inner diameter of the hose should not be less than 16 mm. Fat is not allowed on oxygen hoses, which is constantly happening in the kitchen. they destroy the material and make it crack. Leaks in this case are quite possible.
Rubber in metal braid Rubber eyeliner in metal braids and with additional polymer insulation. this is a high.quality, durable and convenient solution. one. These hoses are strong enough to resist mechanical loads. 2. They are reliably protected from harmful environments, which significantly increases their service life. 3. Very simple installation. four. Low price. 5. The working temperature range is.3550 degrees, which is enough to connect to a gas pipe.
PVC hose reinforced Polyvinyl chloride is probably the most common polymer for today. It is used everywhere, thanks to unique properties and low cost. Recently, gas hoses began to make it from it. They are almost as long.lasting as the bellows, about which we will tell you a little lower, inert for fats, acids and alkalis, do not conduct electric current. All these properties together characterize the solution, as one of the best. PVC hose is two.layer. black material inside, and on the outside. yellow. There is a reinforcing layer between them. This material only entered the markets, so not all gas services are familiar with it and accept when commissioning. if you decide to buy, you will first receive a consultation on this subject. The average cost of such a decision is 140 for half a meter. one. PVC does not burn, but can melt, so the effect of an open flame on it is unacceptable. 2. Touching a hot slab to such a hose tolerates without problems. 3. Immune to oil fog. four. Meets all the requirements and international standards. 5. Maximum length. 6 m. 6. The service life of the warranty is 12 years, it is real. about 20, although in practice this has not yet been verified.
Sylphone hose These gas workers are recommended for installation, and not in vain. They cost more than the rest, but according to working characteristics they have no equal. The service life of a stainless steel product is 30 years or more. The price for a product of 60 cm long is 180-200-not so much to ensure their safety. Such hoses can be single and two-layer in the first case, they are simply made of metal, and in the second- an additional protective coating from the PVC film is applied on top of it. Such symbiosis reliably protects the product from mechanical damage and aggressive media. Due to the fact that the walls of the hose are corrugated, it is easily bending and remembers the form attached to it. one. Sylphone eyeliners are allowed to be used with any gas equipment, including boilers. 2. They hold pressure up to 6 atmospheres, which is enough for gas networks with excess. 3. The operating temperature varies within.50200 degrees, which is not available to the rest of the analogues. four. Also meets all world requirements. 5. Provides tightness of compounds even in the most difficult conditions.

Tips before buying gas hoses