Подключение робот пысесоса Xiaomi lds vacuum cleaner / Проблемы подключения / Как подключить Xiaomi

Russian voice acting of the Xiaomi Mi Robot vacuum cleaner independently

The XVACUUUUM Firmware app is available for Android smartphones. So for iOS.At the moment there are 2 ways to use the author’s program.// hack. We have chosen one method and act strictly instructions for this method, do not confuse them among themselves (more below): without reset Wi-Fi on the robot (you need to get the robot token in any available ways (in a hat)) with a Wi-Fi reset (the program will receive the program yourself) Instructions without reset Wi-Fi on the robot (you must get the robot token in any available ways (in the page of the page 4PDA)):

Launch the application; click on the menu and click on the “Settings)”; enter the IP and the robot token.Click on the “Save” button; the program will ask you to restart the application for using the settings, unload the application: Android: Double pressing the “Back” button or in the menu “Exit (Exit)”; iOS: Double pressing the “Home” and “button” smell “(unload) application.

We start the application again; as soon as the status is obtained, the buttons will become active and you can start flashing the robot; select a firmware or language package, clicking on the corresponding button; then we follow the logo that is under the buttons, and rejoice at a simple and quick firmware.

If you have an error: “Timeout: COULD Not Connect to the Vacuum, Handshake Is Timeout, then you have incorrectly indicated the IP of the robot;” Timeout: Call to the vacuum Timed Out “after 10 attempts to get its status, then you have indicated the wrong tokens.

Instructions with Wi-Fi reset (the program will receive the program yourself): if you previously used the software without unlucking from Wi-Fi, then you need to clean the IP and token in the settings, unload the program and only then act according to the instructions below.In order to use the program, it is necessary to reset the Wi-Fi robot settings (after that, the robot will have to be re-tied in Mihome); reset for the first version is made by holding two buttons (return to the base (Power)) within 3 seconds; Reset for the second version is made by holding two buttons (local cleaning and return to the base) for 3 seconds.

After that, the robot will say that the Wi-Fi settings are dropped, and the Wi-Fi access point with the name of the robot will appear on the phone. You need to connect to it as a regular router; turn off the mobile Internet just in case, as some phones ignore Wi-Fi, if it does not find access to the Internet; then my program is launched (always only after connecting to the robot access point). The program is written for “blondes”, that is, it is impossible to get lost in it. Only 2 buttons (firmware and sound). Well, a menus with ABOUT in case you want to know more about me and help financially developing the project; until the program successfully connects with the robot and gets token and status, the buttons are inactive; as soon as the status is obtained, the buttons will become active and you can start flashing robot; select a firmware or language package, clicking on the corresponding button; then we follow the log that is under the buttons, and rejoice at simple and fast firmware; after all the manipulations, you need to re.tie the robot in Mihome.

On the PDA site page (link above) you can choose a firmware and any other sound bag.You can download a cool sound bag from 1000 DIY’s and Advice, which collects all the most necessary for firming the Xiaomi Mi vacuum cleaner or replacing a sound bag. our channel.There, in a separate Personal Voice folder, everything necessary for creativity is collected.In addition, from this video you will learn how to make your personal voice acting a robot of a vacuum cleaner with your own hands.I recommend doing this to you in a free sound editor Audacy.All the necessary links and folders and sound fibe with cool sounds are in the Personal Voice Xiaomi Mi Robot folder for personal voice acting you will need a microphone and Audacy program.Make a sound package yourself in the Audacy program. At the end of the video, possible problems are listed with the installation of a sound package or firmware of the Xiaomi Mi Robot Vacuum or Xiaomi Mi Roborock S50 S555 vacuum cleaner or firmware.This, of course, is not a homemade, but thanks to this video you will know how to make a firmware of a firebot of the Xiaomi Mi Robot Vacuum or Xiaomi Mi Roborock S50 S55 vacuum cleaner and how to install the Xiaomi Mi Robot Vacuum or Xiaomi Mi Roborock S50 S555

Synchronization with the phone

The device is controlled through the Mi Home application, which can be freely downloaded in the online store. A prerequisite is the presence of a connection to Wi-Fi. On the front surface of the case is an indicator of the state of the wireless network. If it blinks slowly, then the connection to Wi-Fi is expected. With rapid flashing, the connection process is already underway, and the constant glow indicates a connection performed.

You can control the device through the application or by pressing the power button.

Cleaning management

When the user is given the corresponding command, the Xiaomi robot vertebrae will begin cleaning, which is performed according to the intellectual scheme and separation of space into zones. First, the device removes garbage along the edges of furniture and walls, and then makes a route like the letter Z. When the cleaning process is completed, the gadget will return automatically to the base.

Partial cleaning option is available, which is designed to eliminate pollution in the area of ​​1.5×1.5 meters around the circle of the Xiaomi robot-vertebrae.

To pause, you need to click on any button on the case or select the corresponding point in the Mi Home appendix. If a different command was not given within 10 seconds, then the device will go into sleep mode.

The Cleanup Mode item provides an opportunity to choose one of the four options for the actions of the unit. So, the choice of minimum and maximum intensity, quiet mode and standard is available.

The possibility of viewing data on how the main elements of the apparatus wear out the possibility of viewing data. This requires to go to Care, where information will be presented as a percentage of the degree of wear of both brushes, filter and sensor.

The option of determining the time to start cleaning by schedule on the Timer menu is also available.

By going to the Remote Control point, the user will be able to control the device manually, giving him commands to move forward, left and right.

Option

The second method implies the use of the capabilities of the Python-MIIO library, as well as the initial knowledge of such a programming language as Python 3.

First stage

A prerequisite for installation is LibFFI-DEV Libssl-Dev. This requires: “PIP3 Install.U Setuptools and PIP3 Install Python-Miio.

Second phase

It is best to use the Mi Home application to receive devices tokens. It needs to be downloaded, installed and added to the list of devices used by our Xiaomi robot vertebrae.

If you are a user of a smartphone based on iOS, then perform the following actions:

  • Creation of an unencrypted backup through iTunes;
  • Its discovery, which will require software Ibackup Viewer. The function of viewing the file system (RAW Files) is selected, where you need to find Mi Home (COM.Xiaomi.mihome). From here the file “Figures_mihome.sqlite “;
  • To open the extracted database, you can use DB Browser for SQLite, which allows you to find the ZTOKEN file;
  • After the opening of the “terminal”, “Echo ‘0:’ | XXD.r.P | Opensl ENC.D.AES-128-ECB.Nopad.Nosalt.K 00000000000000000000000000000000 “.

The owners of gadgets based on Android will need to perform operations such as:

  • Make a backup of the base »Adb Backup.NoAPK COM.Xiaomi.Smarthome.F Backup.Ab “;
  • To extract data, you will need the ADB Backup Extractor tool “Java.Jar Android Backup Utilities/Android Backup Extractor/Android-Backup-Extractor-20171005-Bin/Abe.Jar Unpack Backup.Ab Unpacked.TAR “;
  • Unpacking is carried out using “TAR.XVF Unpacked.TAR “;
  • You can get a token (ZTOKEN field) by using DB Browser for SQLite;
  • You can view the database manually, or you can apply a tool from the Python-MiIO library “Miio-Extract-Tokens”.

The third stage

A great option would be the use of ready.made scripts. We copy the script you like, for which you will need the DustCloud/Devices/Xiaomi folder.vacuum/audio_generator “. Editing the Generate_audio script.Py can be carried out by means of mac.

To amplifying amendments, use “84. OS.System (“Say.v.o “Path”.-DATA-FORMAT = LEI16@22050 “Text)”.

You can view lists of available votes in “Terminal”. “Say.v ?””.

If, after amending the Robot Pole, Xiaomi refuses to talk, t.e. Silent, it is recommended to check the audio files. They must have the same properties. If the parameters are varying, then you need to correct the scripts.

In folder “./Language “You can find lists of phrases. Choose you like, change its name to “Audio_ru.CSV “and make our own changes with the subsequent launch of the script”./Generate_audio.Py “.

An interactive mode will be needed to select “Audio_ru.CSV “and TTS engine, resulting in an accessible document ru.PKG.

Its pouring a gadget from Xiaomi is carried out by using the Miro Install_Sound command./ru.PKG “. Just do not forget to fulfill in advance “Export Mirobo_token =” and “Export Mirobo_ip =”.

This is where the process of the reappeeling ends. Now your Xiaomi vacuum cleaner will “speak” in Russian, thanks to which you will understand everything that he will say.

️ How to reflash the Xiaomi vacuum cleaner into Russian

Xiaomi robots have gained popularity in our market in the Smart House segment. They support cleanliness in many houses, but make sounds in English. But you can speak with your Xiaomi vacuum cleaner in one language. How to do this, now we will tell.

To do this, you will need a smartphone based on Android and the vacuum cleaner itself. This instruction is suitable for both Xiaomi Roborock SWEEP ONE S50/S55 models, and Xiaomi Mi Robot Vacuum.

To firm the vacuum cleaner, download the application (mirror) and install it, but do not start.

Next, you need to download the official Russian voice package or choose another option from this archive. Place the language package in PKG format in your smartphone, preferably in the root, excluding various folders.

Now it’s time to go to the vacuum cleaner. Start a vacuum cleaner and drop Wi-Fi settings. Depending on the model, this can be done by pressing the keys of the return to the base and turning on or local cleaning and returning to the base for several seconds.

After reset Wi-Fi on the vacuum cleaner, turn off the mobile Internet and go to Wi-Fi settings on your smartphone.

Find a non.parallel access point that your vacuum cleaner gives out and connect to it.

Now start the installed application.

The application will automatically determine the token of your device, two orange keys are activated. You need to click on Flash Sound.

Fixing a common problem in the Xiaomi Mijia G1 Vacuum-Mop Robot

Next, select the desired voice package, after which its installation will begin.

After a couple of seconds of firmware, the application logs will cease to be updated, which will mean the end of the installation process of the voice package. Now the Xiaomi vacuum cleaner has become even closer to you and is ready for further connection in Mi Home.

If it is not stitched, 50 lines will appear in the log indicating Trying to Flash The Firmware. In this case, you need to completely reset all the settings of the vacuum cleaner and try again. If the smartphone does not allow you to install the application, then go along the following path: “Play Market”. “Play Protection”. “Settings” and disconnect the “Scanning of applications using Play Protection”.

No barriers with Xistore! You can also watch a video instruction:

Using a computer

The process of firmware on PC is made in a similar way. But there must be a wireless wire-fi wireless communication module. Without this, the flashing will not work.

Step by step is performed as follows:

  • Download the Win-Mirobo application. You can also find either on the official website of the developer, or on thematic forums.
  • Install the program. In her directory, in the VoicePack folder, it is necessary to copy.PKG files of voice commands that are planned to be used to download on a robot vacuum cleaner.
  • If necessary-open a file (Win-Mirobo.ini) and manually prescribe the IP address of the Robot-permutation and its identifier. This is necessary if the installation of a voice package is performed without resetting Wi-Fi settings. Otherwise, it is enough to connect to the access point of the vacuum cleaner.
  • Run the program. The command line terminal will open, an automatic search for the device will start. Upon its completion, a menu with the choice of voice packages will appear. You just need to choose the necessary version of “voice acting” and click on the “Enter” keyboard. The rest of the work program to perform automatically.
  • After the firmware process is completed, the robot vacuum cleaner must be tied to the Mihome account using a smartphone. That is, enable the search for the device, perform the conjugation. Previous device from the Mihome list. Delete.

Before proceeding

Before proceeding to the firmware procedure, it is necessary to take into account the following:

  • “Pour” into a robot vacuum cleaner at the same time only one language package can. They switch through the official Mi Home application. That is, each time the download and installation of voice files is performed.
  • There is no verification of voice files in the factory firmware of the robot. The software contains only a link to download a data package, which will subsequently be installed in the internal memory.
  • To install the “custom” language package, it is enough to “slip” third.party files to the vacuum cleaner at the link requested by it. Respectively, modify the firmware itself is not necessary. It is enough to use a specialized application that allows you to perform packages when requesting data with a robot-sprayer.
  • Earlier, to install third.party vocal packages, it was necessary to receive the serial number of the device, as well as its “identifier” (token). Now you don’t need to do it. Special programs do all this automatically, the user needs to literally only indicate which voice package he needs to put in a vacuum cleaner.

How to enable and configure voice control

To control the voice teams, a robot-sprayer will need:

  • Install Mi Home on a smartphone, synchronize the application with a vacuum cleaner.
  • Install Alice application on a smartphone.
  • Launch the Yandex program, log in.
  • Select “Smart House”, select. “Add”. From the presented list, indicate “Xiaomi”.
  • Perform authorization through Xiaomi profile (which is used to enter the Mi Home app). After about 2 to 3 minutes, all compatible devices will appear on the Smart House list that can be controlled by voice teams.
  • Open the Mi Home app. Rename the robot vacuum cleaner using only Cyrillic.

After that, you can manage through Yandex Alice with a vacuum cleaner. The application will also indicate a list of all supported commands. They can be edited at their discretion, block, suspend execution and so on.

After setting voice control through Alice, the teams can also be pronounced in Yandex.Station (if there is a column). This device has a sensitivity of microphones is an order of magnitude better than in a smartphone, so managing it with its help is really more convenient.

Possible problems and how to solve them

In principle, any problems should not arise if you clearly follow the above instructions for setting up a robot permissive. But Mi Home is not the most “stable” program, according to the reviews of the users themselves. She often freezes or stops working right during the configuration, conjugation of the robot with a smartphone. There is nothing critical about this, but the user should know what should be done in a particular situation:

  • If the firmware (both using the phone and PC) ends with an error, then in most cases the banal rebooting of the vacuum cleaner helps. That is, it is enough to turn it off and turn it on using the button on the case itself.
  • If, when using a PC, the Win-Mirobo program immediately closes after starting, it is recommended to check the network settings and add the Wi-Fi connected to the home network. Otherwise, it involves a firewall, which blocks the exchange of data with “unknown” devices, for connecting to which it is not required to enter a password.
  • After some time, the settings of the installed vocal package are dropped to factory or notifications simply not played. This happens only after the wi-fi of the Robot Perman is reset. Sometimes. after updating the firmware through Mi Home. In this case, it is recommended to re.flash it again.

Total, Russifying a Robot Veswell from Xiaomi is quite simple. It is convenient that the XVACUUUUUM Firmware and Win-Miro allow this even if the equipment is released for sale in the Chinese consumer market (they are bought, as they are cheaper than “global” versions). The whole procedure takes only 5. 10 minutes.

How to reflash a robot vacuum cleaner

In all robots, which were released in 2022, the support of the Russian language is included by default. That is, the need to perform their flashing. no. This will be needed only for vacuum cleaners that were released for the domestic Chinese market. In this case, to include support for the Russian language, you need to flanch the voice package.

How it works in practice? The package of sound files that are saved in the internal memory of the robot-blanket is simply replaced. The firmware itself is not necessary. this is not necessary. The only nuance: in the application, you need to choose “English” for voice teams. But instead of English, Russian will be involved.

How to flash with a smartphone

You must first download and install the X Firmware Update (XVACUUUUM Firmware) application. You can download it for free on GooglePlay. The version for iOS is also provided, although its functionality is more limited (since there is no full access to the file system. this is the restriction from the side of iOS, which cannot be bypassed).

Additionally, you need to download the voice package in Russian. It is laid out in open access on many thematic forums (for example, 4PDA).

  • In the robot, it is necessary to reset the conjugation settings. To do this, press and hold the Home 5. 10 seconds button. First, light indicators blink on the vacuum cleaner, then a sound signal will be heard, indicating that Wi-Fi settings were dropped to the factory value.
  • In the smartphone settings, connect to a Wi-Fi access point of the robot permissive. As a rule, it is called “Xiaomi-Vacuum-XXXXXXX”, where instead of XXXXXXXX is its serial identification number. On different models, the name may vary. Wi-Fi password does not need to be entered, the connection is carried out without its input.
  • Run the X Firmware Update program. The search for a compatible robot permutaum will automatically start. The name of the access point will be displayed on the screen.
  • Click “Flash”, it will be proposed to select the file of the voice package, which must be installed in the robot vacuum cleaner. Indicate it through the built.in file manager. It must be taken into account that the installation will be completed successfully only if the file.PKG (it is such an extension is used in voice packages) is placed in a folder, in the name of which there is no Cyrillic alphabet. The best option is to copy it in SDCARD, that is, in the internal memory of the phone.
  • Click “Trying”. There will be a warning that the firmware can lead to the failure of the robot permissive. In fact, this is almost impossible to do. Even if you accidentally select another file, then the firmware will simply stop immediately, the vacuum cleaner will again go into the mating mode.
  • Wait for the firmware. File transfer, as a rule, takes no more than 30 seconds. After that, the robot vacuum cleaner will automatically restart.
  • Go to the Mihome application. Carry out repeated conjugation with a robot-blade. That is, slip on the icon with the icon “”, select “Add Technique”, indicate from the list of robot-veils. Wait for the end of the conjugation.
  • Go to the settings of the Robot Permanis, select the “Voice Notifications” item, select “English language”.

And after that, the vocal package installed via Xvacuum Firmware will be involved by default.

How to install a voice bag through PC

The procedure is performed in a similar way. But instead of the XVacuum Firmware application, Win-Miro is used. You can download it for free on the official website of the developer or from thematic forums.

Win-Mirobo is an application with a command line integust. It is not convenient for all users to work with it. So the firmware through the phone is a more convenient and preferred option.

Step.by.step installation of a Russian voice package is performed as follows:

  • It is also necessary to first reset the Wi-Fi settings of the robot permollis. Squeeze the Home button for about 5. 10 seconds, wait for its automatic restart and corresponding sound signal.
  • With PC, connect to the access point of the robot permissor. Accordingly, you will need the presence of a Wi-Fi module or use any laptop. System Operation. Any, starting from Windows Vista and older.
  • Put the downloaded program into section C (where Windows is installed). You need to install it, just unimposed. You can use the 7-ZIP application (free, supports all popular archive formats).
  • In the unpacked folder, start the Win-Mirobo file.Bat. The command line window opens and an automatic search for a compatible device will start.
  • In the “VoicePack” folder, the unpacked program needs to be placed by voice packages, which are planned to be installed in the robot vacuum cleaner.
  • After completing the search for the device, a list of voice bags available for installation will appear in the command line integration. Select the necessary.
  • Wait for the end of the vacuum cleaner firmware.

After that, it remains only to compat the vacuum cleaner with a smartphone via Mihome and in the settings of the device to select English for voice notifications.

By the way, in this way it is possible to establish not only the Russian language, but also the “comic” voice notifications. You can make sure that the robot vacuum cleaner, for example, speaks the voice of popular cartoon characters. The vacuum cleaner does not check the voice files in any way, it simply reproduces what they “slipped”.

It is also worth mentioning that periodically the program refuses to find a vacuum cleaner connected via Wi-FI. In this case, it is recommended to re-reset Wi-Fi parameters and repeat the procedure again. You should also temporarily disconnect the firewall in Windows. it can block network connection.

Setting up the robot-blanket after flashing

After flashing the robot, its adjustment is performed in the usual way. But the wes-fi settings are not required.

That is, the actions of the user should be such:

  • Connect to Wi-Fi home network. Choose exactly a router, and not an access point of a robot permissor.
  • Open Mihome. It is recommended to immediately remove the robot vacuum cleaner from the list of devices if the device has already been mighty with this smartphone.
  • Click the icon with the icon “”, select “Add technique”.
  • Indicate the discovered robot vacuum cleaner.
  • Wait for the end of the conjugation.
  • Go to the vacuum cleaner settings. That is, just slip on it from the list of conjugated technology on the main screen.
  • Select “Voice Notifications”, indicate “English”. In this case, the application will not download the new voice package, but will use the one that is already in the robot (which was sewn earlier through XVACUUUM FIRMWARE or WIN-MIROOO).

Russian language for Roborock Sweep One and Mi Robot Vacuum Cleaner

With models Roborock and Vacuum Cleaner is more difficult. To install the Russian language, it is necessary to counter these vacuum cleaners. But you can choose not only standard voice acting, but also custom sounds, whether it be “star wars” or “Winnie the Pooh”.

Choosing a language package

Before starting installation, it is necessary to decide on the choice of a voice package for your home assistant. At the moment, there are already:

  • Male voice “Maxim”. Original appeals to the owner of the type “master” and “Your Majesty” are available here, which will feel a little to the owner of the palace with subjects. Also, this package by default is louder than the rest;
  • “Alice” from Yandex paired with replicas of the house of Kuzi from the same Soviet cartoon;
  • Winnie-Pooh’s voice;
  • Package “Leather Bastards”, based on popular meme. May contain obscene vocabulary;
  • The voice acting of the BB-8 droid from the Franchise “Star Wars”;
  • a package with popular phrases from the cult Soviet films “Ivan Vasilievich Changes the Profession”, “Operation Y”, “Gentlemen of Good luck”;
  • “Scarlett (Alice)” supports the voice acting of the cleaning zone.

Almost all packages support the commenting of the main actions:

  • cleaning start;
  • return to the charge station;
  • the formation of a virtual wall or a meeting with it;
  • creating a map of the room;
  • Garbage cleaning.

It is worth noting that these packages can not be installed on all models of Xiaomi robot perceptions. For example, only standard Russian.language voice acting is available on Vacuum Cleaner 1s.

Xiaomi also has a Mijia Substorm, and some devices intersect with each other. So, for example, for the Mijia LDS Vacuum Cleaner robot, the same packages and installation instructions are suitable for Xiaomi Mi Robot Vacuum Cleaner.

Installation using a smartphone on Android

The most common way to work with home smart equipment is a smartphone. Almost every person has him, and many people know how to manage them. Therefore, it is worth first of all to consider the method of firming the Xiaomi vacuum cleaner into Russian using a smartphone.

With automatic definition of token and IP address

The token is called the vacuum cleaner identifier. It is assigned to unambiguously determine the device on the network and changes only when resetting the settings. Without knowledge of it, as well as IP addresses, which is assigned to the router to the vacuum cleaner, it will not be possible to Russify.

First you should try a method with an automatic selection of parameters. It is noticeably easier.

  • Download for smartphone program XVACUUM Firmware 4.0.0. Install, but not run.
  • Download the selected voice package. Initially, it will be in the format of the archive that needs to be extracted. If everything is done correctly, you will get a file with the extension PKG. Only this format is suitable for installation.
  • On the vacuum cleaner, clamp the buttons on the top panel for 3-5 seconds, to the sound signal. After that, Wi-Fi settings will be reset.
  • Disconnect your mobile Internet on a smartphone and turn on wi-fi. You need to connect not to your network, but to the Wi-Fi robot permollis.
  • Launch a program downloaded in the first paragraph.
  • Select the “Flash Sound” item on the main menu.
  • Choose a downloaded package.

It remains only to wait for the end of the installation. At some point it may seem that the process is dependent. This means an early completion of the installation.

Manual definition of IP and token

The yellow buttons in the main application menu at the first entrance will tell about the successful automatic definition of IP and token. If the program failed to determine these parameters, then you will have to do it manually.

  • Install Mihome modified from VVS. If the original has already been installed, then it will have to be removed.
  • Open the downloaded application and add your vacuum cleaner there. This process is described in the section for Mi Robot Vacuum Mop at the beginning of the article.
  • Open the profile.
  • Select “Access” item.
  • Go to “Access to the device”.
  • Token is indicated under the name of the vacuum cleaner. To copy, it is necessary to hold a finger on it.
  • return to the main menu of the Mihome application;
  • press on your vacuum cleaner;
  • In the upper corner, press the icon in the form of three points;
  • Go to the section “User Manual”;
  • click on “serial number”. IP devices will also be indicated here.

It remains to manually configure XVACUUUUM Firmware:

  • Open the application.
  • Click on three horizontal lanes in the upper corner.
  • In the falling menu, select “Settings” item.
  • Enter the found parameters.
  • Press the Save button.
  • Restore the application.

A sign that everything was successful, the activation of the buttons in the main menu will be. Further actions to install the Russian language are similar to the fact that they are indicated in the leadership with the automatic definition of token.

Installation of the Russian language using iPhone

You can install Russian voice acting with iPhone or iPad. To do this, you need to download the version of the Xvacuum Firmware 4 program.0.0 for iOS. First, the archive is downloaded. The extracted program is installed using iTunes or a similar application. Similarly should be done with voice packages. Everything is placed in the section “General files”. There should be nothing in the files of files and their names, except Latin and Signs of Lower Emphasizing. The rest of the differences from Android, whether it is an automatic or manual search for IP and token, no.

The XVACUMM Firmware program makes 50 firmware attempts by default. In case of complete failure, it is necessary to remove the application and repeat the entire setting and installation process.

Installation via PC

In addition to installing from the phone via Android or iOS, you can put the Russian language on the Xiaomi vacuum cleaner using a computer based on Windows. For this:

  • Find out IP and token. The process is described in detail above.
  • Download on PC “Win-Mirobo-1.one.0-Min “and unpack.
  • Open Win-Mirobo.ini ”using a notebook. press the file with the right button and in the drop.down menu Find the“ Open ”line.
  • Indicate your IP and token.
  • Save changes.
  • Extract the archive with a voice package into the VoicePacks folder.
  • Launch Win-Mirobo.Bat “.
  • If all previous steps are performed correctly, then under the second point there will be the inscription “Flash Voice Package”. You need to choose it by pressing 2, and then Enter on the keyboard.
  • A list of packages in a folder from paragraph 6 will be displayed. Choose how in the previous paragraph.

The installation of the language package will begin. It can last a few minutes.

It must be remembered that charging the robot permissible should not be lower than 20 % at the time of the start of the firmware, and it is best to charge it completely. Sudden shutdown in the middle of the process can turn the gadget into a donor of spare parts.