Do.it.yourself Candy washing machines: repair tips

The washing process in the washing machine can be launched only on condition that the machine door is blocked until the end of the work cycle is due to the requirements for the safety of the device. to create perfect tightness so that the water does not flow out of the tank. Sometimes the machine can simply stop blocking, and it will not be possible to start the washing until the malfunction is eliminated.

First of all, it is necessary to check whether any thing has pinched the loading hatch door. If there are no obstacles to closing the door, there may be several reasons for such a malfunction. Conventionally, they can be divided into two types. mechanical damage and problems with electronics. If you need repair of the washing machine, contact our company.

If the damage is mechanical, then the door will not be fixed at all and a characteristic click will not be heard. If problems with electronics, then the door may be closed, but the lock will not happen. a re.click will not be heard, indicating the fixation of the hatch with electronics. In the last situation, the machine should submit the corresponding error on the display.

What is happening inside the machine?

The user is used to seeing the front part of the device, twist the programmer, press the buttons, block the device from children, load dirty linen into the drum and observe how it “dangles” in water. How exactly the main washing cycle, rinsing and sealing, are known to few people. This is actually very exciting. Kandy, like all washing machines, has a drum covered with a door. Dirty clothing is placed in it, where it is cleaned of dirt, rinsed from washing trains and gets rid of excess water. All this is due to the rotation of the drum. In order for it to rotate, an engine with a complex drive mechanism is needed. Candy has a belt drive, the work is provided as follows:

The drum itself is located in a plastic tank, the main task of which is to keep water. At the same time, the walls of both elements never come in touch, so the drum does not jam. The exhaust valve helps to get clean tap water in the machine. When a sufficient amount of fluid is typed, it closes.

If the water is worked out, it merges using a pump. She begins to work after washing, rinsing and when spinning. The washing machine should “know” how much liquid remains inside. For this, the device provides a water level sensor (Pressostat). There is a thermal attenter that determines the temperature of the water heated with the help of a heater.

All processes are regulated by the control module. He holds in his memory the parameters set by the user and ensures unquestioning commands. The control module triggers the heating element, “observes” the data of the press start and thermostat, determines the engine operation, and participates in the operation of each mechanism.

Important! Inverter engines technique works differently.

2) used tools and accessories

In order to make it easy to perform checks listed in this guide, we offer the use of the following devices and tools:

DIGITAL MULTIMETER: The multimeter should be capable of measuring voltage (V), and current (A) for alternating (AC) and constant (CC) values; Resistance measurements (ω), diodes, and checking the integrity of the chain (with zummer). The multimeter should be equipped with cords with connectors and connectors.

DIGITAL THERMOMETER: A digital thermometer can be any as a classic with a wired thermocouple for contact research and “infrared” also with the possibility of connecting wired thermocouple.

Patch Cord (special cord): produced gias with p/n. 91941051 (Technical Guide 01ge. 2001, as amended by 2006) is equipped with an automatic safety switch and allows for “safe” checks on all components of the device. Several black/red wires are attached to it for a multimeter with safe plugs.

For easy and safe testing of motorized selectors, potentiometers and electric engines, some specially designed test tests are carried out with safe plugs suitable to be directly included in the multimeter nests (see. Appendix A and Appendix B).

NETWORK CABLE: It can be a cable equipped with you is the isolated papa connectors. It is necessary to check the program selector.

3a) checking the programs of programs with “short shaft” and “long shaft” (16, 22, 30 positional)

Electromechanical program selectors (with a short and long shaft. see. Figure 1) were used on washing machines with a mechanical water distribution system (with a pin and movable nozzle), with all types of available electronics. These selectors include a potentiometer with several (16.22.30) regulation provisions, mechanically associated with an electric motor, which is also used to move a pin associated with the moving nozzle of water supply. Each position of the potentiometer corresponds to accurate ohmic unique resistance (ω). corresponding to various washing programs. The control module supplies low voltage pulses to the selector, and measures the resistance of this position of the potentiometer. Measuring the voltage drop, the control module is able to determine what the position of the selector.

Rice. one Electromechanical program selectors

Necessary materials to check the electromechanical selector:

  • Digital multimeter with isolated wires
  • Test cable for electromechanical selectors (p/n. 49009656. see. Appendix A).
  • Network cable with isolated connectors and shuko plug (see. Chapter 2).

Candy Washing Machine Touch Button not working | Candy Washer 9kg | Modal cs1292D2/1-19

Note: In order to check the functionality of the electromechanical selector directly on the washing machine, there is no need to remove it. The machine should be disconnected and the upper cover should be removed on it. It is necessary to turn off all the connectors of the selector.

3a1) Testing the selector microswell to the “OFF” position:

  • With a selector (with a long shaft) by car, install the program selector in the Off position.
  • The multimeter is installed in the call mode (with a zummer) and measures on the contacts of the microswitch. The chain should be open. If the selector is not installed by car, rotate its shaft clockwise until the open state appears on the switch micocontacts (rice. 2). If this fails, the selector microswalker is faulty (sticking contacts).

Rice. 2 Checking the program microswitch programs

3a2) verification of the ohmic (ω) resistance of each position of the selector:

Connection the gias p/n test cable. 49009656 to the selector that will be checked. Connection of the plug 4. 5 of the test cable to the multimeter placed in the resistance measurement mode (ω).

Start with the Off position (0) (cm. chapter. 3a1), manually turning the selector shaft clockwise and reading the corresponding ohmic resistance value on the multimeter display. (rice.3)

Check the resistance values ​​on the following tables determined for electromechanical selectors. The data in the tables differ, depending on the selector model, (Invensys or MDL. tables one and 2). The next drawing shows the reading of the 4. 5 Gias test cable, on the INVENSYS electromechanical selector.

Rice. 3 Checking the ohmic resistance of the provisions of the program selector

3a3) Checking the selector engine:

Connection the gias p/n test cable. 49009656 to the selector, which will be verified. Connect the insulated connectors of the “dad” of the network cable to the “mother” of the GIAS test cable isolated connectors (1 and 7. cm. rice. four). Turn on the network cable in the network 230V/AC. 50 Hz. Check that the engine works.

Rice. four Checking the electric motor of the program selector

3a4) relevant only for electromechanical selectors with a “long shaft”. checking the discharge of the water fist of distribution:

Connection the gias p/n test cable. 49009656 ”to the selector that will be checked. Connect the insulated connectors of the “dad” of the network cable to the “mother” of the GIAS test cable isolated connectors (1 and 7. cm. rice. 5)

Multimeter switch to call mode (zummer). Connect the gias test cable, connectors 3 and 4, in the multimeter. Connect the selector engine using a network cable. The engine should work and the fist of water distribution should rotate.

Check that the multimeter zummer will sit once, during the full turn of the fist of water distribution.

Rice. 5 Checking the reset of water fist of the distribution of the program selector

The resistances of the electromechanical selector of the MDL programs (versions with a short and long shaft, 22 and 30 positional) Pos. Resistance (ω) (contact 4-5) 30 poses. with a short shaft resistance (ω) (contact 4-5) 22 poses. with a long shaft resistance (ω) (contact 4-5) 30 poses. With a long shaft
0 “OFF” The chain is open The chain is open The chain is open
one 480 558 480
2 333 567 333
3 940 968 940
four 600 627 600
5 1367 1382 1367
6 857 866 857
7 1765 1773 1765
eight 1111 1125 1111
9 2132 2122 2132
ten 1363 1367 1363
eleven 2470 2449 2470
12 1615 1626 1615
13 2779 2749 2779
fourteen 1867 1881 1867
fifteen 3058 3030 3058
16 2117 2150 2117
17 3308 3250 3308
eighteen 2368 2395 2368
19 3529 3468 3529
twenty 2619 2664 2619
21 3720 3640 3720
22 2869 2869
23 3882 3882
24 3120 3120
25 4014 4014
26 3370 3370
27 4117 4117
28 3620 3620
29 4191 4191

We analyze the problem

I’ll have to figure out how to remove the drum on the washing machine. This cannot be done with bare hands, but having a set of tools in stock, it is not difficult. So what will come in handy?

Screwdrivers, pliers, hammer.

Article in the topic: How to remove the blocking from the Samsung washing machine. General safety requirements when analyzing the washing machine, regardless of the type of repair and loading. an empty drum, de.energizing and disconnecting the water supply, that is, disconnecting the hose.

repair, candy, washing, machine

Preliminary actions

Surely, each owner has a small box with the most important tools: a hammer, drill, pliers, electric screwdrivers, screwdrivers and hexagons. To disassemble the automatic car of Kandy, there will be enough listed devices. The only thing, in addition to repair the knot, will have to prepare a hacksaw for metal.

Details that need to be replaced, it is better not to order in advance. You can confuse the marking of components and purchase unsuitable spare parts. It is advisable to first get the elements, and only then to buy new ones, similar to those removed. Having prepared tools, you can do the automatic machine itself. The repair process will take a lot of time, so it is better to immediately equip a convenient workplace for yourself. Ideally. take the washing to the garage or workshop.

If this is not possible, the device should be transferred to a spacious room, where nothing will interfere with the disassembly procedure. The floors in the room must be covered with a cloth. It is also necessary to take care so that all sides of the washer are provided with free access. After preparing the workplace, you can start repairing.

How to prevent a second breakdown

Carriage manufacturers thought out absolutely everything regarding the operation of the device. They create tanks made of heat.resistant plastic, which is not destroyed under the influence of moisture and high temperatures.

How to Prevent a Washing Machines Shaking and Spinning Noisily

The development also takes into account the constant mechanical load. intensive vibrations in the process. The container cannot be damaged with ordinary washing. dense plastic withstands permissible loads. But, the only thing that was not protected by the washing machine is a violation of operation rules. In order to prevent a repeated breakdown of the tank, it is necessary to adhere to the following rules:

  • Regularly, before washing, to extract all metal objects from s;
  • Do not wash clothes with poorly fixed metal accessories;
  • avoid the penetration of cars of any objects that can damage the tank into the drum.

When repairing a bursting tank of a washing machine, it should be borne in mind that subsequent breakdowns may require replacing this part. Performing simple rules, you can protect the machine from the breakdown, and it will last for many years.

What is necessary

To replace you need some tools and skill in their use. It will be required: two “Torx” screwdrivers and one small slot.

Broken loop and tools

Perhaps you will need a flashlight for backlighting. Instead of “Torx” screwdriver, I use a set with nozzles of different sizes. If the bolts are sour due to rust, then I process the connection place with the WD-40 tool, and leave for 5-10 minutes.

I work in the field of repair of household appliances. Extensive experience in restoring washing and dishwashers.

As a rule, this is enough. In very severe cases, I use the end tool. But it should be noted that the battles under the screwdrivers are not suitable for any standard size of the end keys. In this case, a special adapter from the bits to the end key is needed.

repair, candy, washing, machine

Before replacement, you need to find a suitable loop. This is best done by the grocery room, which is on the white sticker under the door of the hatch. In our case, it is 31000970. By this number, we select the necessary loop from the supplier of spare parts for washing machines. Luke’s loop with number 49001262 is suitable for our lump.

Sound function is limited to 200 characters

Settings: History: Feedback: Donate Close

Stick under the hatch.

Program switch and control module

Further, if there were no problems during the examination of external and internal wiring, they begin to check the program switch and the general control module of the system.

The easiest way to replace a broken part if a malfunction is detected, however, often such a repair can be expensive, and it can hardly be called justified.

You can fix the switch and control module with the help of a professional who will do everything so that the machine starts to turn on. It is not recommended to do this on your own, since there is a risk of aggravating the situation, causing additional breakdown.

How the repair of Candy washing machines is carried out

To eliminate the malfunction with your own hands, careful preparation is necessary. A spacious workplace, tools and auxiliary accessories will be required.

This breakdown is quite simply eliminated by its own. The problem, as a rule, manifests itself in situations when the rules of operation of the machine and care are violated. Plum cleaning begins with the filter check. In Kandy, it is located in the lower left side, hidden by a small door or panel. For cleaning it is carefully unscrewed counterclockwise, pulled on to themselves. Previously, on the floor, it is necessary to spread a rag to collect flowing water. The extracted filter is washed with water, cleaned of garbage, installed in place.

To clean the hose, a pipe and pump you will have to lift the washer or put on the side. Previously, the power supply is turned off, the drain hose is disconnected from the sewer system. The pump in the cars of this brand will have to get through the bottom, which either is not, or there is a special tray.

By loosening the clamps, it is necessary to disconnect the hose and a pipe. The latter is washed with water, wiped dry. The hose is cleaned with a cable with a ruff, examined for damage. After that, the sensors are disconnected from the pump intended for draining water, fasteners are removed. Having taken out the pump, you need to check the impeller located under the lid. As a rule, hair, wool, villi are wound on it, so everything will have to be removed. The burned pump is recommended to be replaced with a new.

Now it remains only to assemble the machine and try it out in work.

Such works are considered more serious. The difficulty of replacing bearings is that the sleeve that holds them is pressed by the thermal method, and the bearings themselves are difficult to extract. For the repair, you will have to disassemble the washer, taking off the top cover and back panel. Previously, you should get a tray for detergents. Then the front panel is disconnected. It was the turn of the tank, which is removed neatly so as not to damage the wiring and hoses, previously detachable.

The peculiarity is that you can’t cope with such a job yourself. an assistant will be required. To remove the bearings, the tank will have to disassemble, remove the pulley from the shaft, extract the shaft and start removing two bearings. For such work, you will need a special removable device, but you can use the usual hammer. Now it remains to install new bearings and assemble a machine. It will not be superfluous if the cleaned planting nests you pre.coat with lubricant.

Another problem is the wear of shock absorbers. Strong vibration will remind you of this during washing or push.ups. These elements are located under the tank. Remember that the shock absorbers are non.vegetable structures, so they will have to be completely changed. For this, the lower ones are first unscrewed, and then the upper mounts. Sometimes there are plastic latches, on which you just need to press to pull the fixing pin. The extracted old shock absorber is changing a new analogue.

Most often this element fails with prolonged operation of the machine. The reason is the stiffness of the water besieging on the heater with a dense coating. With such a refusal on the screen, a special error code will be displayed. You should not worry here. the work is simple, it is quite possible to do it with your own hands. It should only be remembered that the heating element is located behind the rear panel, under the tank.

To replace it, it is necessary to carry out a number of operations:

  • Remove the panel;
  • unscrew the bolt fixing the water heating element that failed;
  • turn off all the sensors, after remembering or placing their connection;
  • With the help of a flat screwdriver, you can begin to extract the heater, carefully pulling it to you;
  • Using a multimeter, it is checked for performance;
  • A working element is simply cleaned of scale, and instead of a burned out, a new analogue is acquired;
  • We carry out the installation, connect the wiring and sensors, screw the fastener, install the rear panel in its place.
  • Problems with electricity and electronics.

Electricity refusal is another characteristic problem that implies not only electrical wiring, but also sensors. Most often, the tagros and the press.start of the fluid level refuse to. Checking the wiring for performance is a rather complicated process that implies the presence of a multimeter and the ability to use it. Sometimes a visual inspection is enough to determine the oxidized wires or terminals.

The water level sensor changes easily. It is located in the upper corner, under the lid. The wiring leading from the pump and electric payment is disconnected from it, the tube connecting the device with the tank is disconnected.

A new. But the tacracker must be changed to the experienced master, because you will have to disassemble the washer to get to the electric engine.

If protection against voltage drops is not established, or there is no grounding, the management module may refuse. The machine will stop turning on, a failure will fail in programming, the washing machine will “hover”. The board responsible for management is quite expensive, so it is recommended to trust it with an experienced specialist. Most often, all the work ends with its complete replacement.

A few more failures

It happens that during the start of the machine does not turn on. There may be several reasons for this:

repair, candy, washing, machine
  • burned out or twisted a network cable. It must be checked, if necessary, replace. It happens that the problem is hidden in the extension cord used, so it is recommended to start checking with it;
  • There is no voltage on the network. It may also be simply not enough to start the washing machine. To check you will have to use any electrical device. If the “diagnosis” has been confirmed, invite an electrician;
  • Contacts on the launch button oxidized. Remove the top cover, remove the powder container, remove the panel, turn off the wiring leading to the control module, inspect the contacts. They will have to either protect or change;
  • The management module failed.

Noticing a puddle on the floor, it is recommended to urgently search for leaks. But before all actions, the machine must be de.energized so as not to get an electric shock.

  • The dispenser tray clogged with detergents, scoring a pipe;
  • The pipe of water drain was damaged;
  • From prolonged operation, it was worn out or damaged by small objects of the cuff, having lost its tightness.

REPAIR OF HOUSEHOLD APPLIANCES

8 (926) 523-71-06

Signs of the destruction of bearings, this is an increased noise when washing and spinning. In case of the beginnings of the bearings, it is advisable not to delay the repair, otherwise it may break the shaft of the drum. Further repair will be difficult.

The search for components is made by commercial code on the nameplate under the door of the boot hatch.

During the repair, the task is to get to the bearings. Bearings are pressed in the rear power flange of the tank.

We start a preliminary disassembly of the washing machine. Remove the top cover, rear wall, lower base (access to the drain filter under the lower base). Dismantle the pens and the front panel. The front wall of the body of the washing machine is not removable, attached to the side walls with contact welding.

We dismantle the upper counterweight and analyze the mechanism of the water distributor.

We dismantle the bunker a dispenser, water supply valve, disconnect the dispenser nozzle from the tank. Subsequently, the installation sites of the pipes on the tank must be transformatized. Sore site of Candy washing machines with a metal tank. Superior of the pipes.

Carefully remove the hatch of the hatch door, unscrew the back of the hatch door.

We dismantle the upper caliper without disassembling the electric circuit.

Put the washing machine with the face down.

We turn off the pulp of the drum (a 19th nut), dismantle the heater, thermostats, disconnect the wiring from the tank, remove the drain pipe from the pump.

Dismantle the electric motor. The right seat of the electric motor is made with the possibility of adjusting the position for tensioning the belt.

The washing machine is laid on the front side. Nodes, sensors and electrical wiring are dismantled from the tank. Next, put forward the tank to the upper side of the SMA body and remove it.

Next, we develop the fitting bolts of the front and posterior power parts and dismantle the front power screed of the tank.

You can not remove the front flange of the tank and not remove the drum itself, it is enough to remove the rear power flange. Bearings and an oil seal are in the rear power flange.

We press new bearings into the flange, clean and grind the tsapfu of the drum and begin the preliminary assembly of the tank. We insert the axis (tsapfu) of the drum into the bearings, besiege the tsapfu in place. We combine the holes of the back wall of the tank with holes on the rear power flange and fix it with the heating.

Put in place the front power screed, tighten with bolts, install the pulley in place.

We install the nozzle on the sealant in place, after cleaning the installation places. Install the lower counterweight in place.

We install the tank in place in the case on our suspension springs and put the washing machine with the face to the bottom.

Bearing was out of order

He could rust or repain for a factory marriage. This is also one of the breakdowns in which it may seem that the unit needs serious repair. In fact, this is a rather easy malfunction. The bearing is an inexpensive part. Change it yourself, for many it may be difficult, but it is quite possible.

Always check the s of embroider clothing before sending it to washing. If an extraneous item is large, it can slow down or even stop rotation. Extraneous noises and vibrations are also possible.

The drum wings opened

This situation is very unpleasant, because it can lead to a serious breakdown. It will be necessary to turn off the unit, make emergency unlocking and forcibly close the wings.

If the drum is deformed in your washer, or holes have appeared in it, then in this case, it really will have to be changed. Let’s see what this process looks like. To do this, we need the most ordinary tools that everyone usually has in the house. These are flat and cross screwdrivers, a set of keys, a divorce key and pliers. Further in order.

3.Disconnect the wires from the control panel.

unscrew and remove the control panel.5.Disconnect the wires from the engine and heating.

Next, we need to install a new spare part. We produce children in the reverse order.

one.We install a new drum in the same way as the old.

2.Connect the drain hose and connect all the wires from the previously connected.

3.Return back and fix the control panel.

We connect the device to the sewage system, turn on the outlet and start. If you are not a professional in the repair of washing machines, you would not advise you to do this yourself. Contact specialists or service center, you do not risk breaking the equipment even more. But if you have skillful hands and you are technically savvy, then nothing will be especially complicated for you. You decide.