What are the solutions

Heat-resistant mixtures made in industrial conditions, then come to the shelves of construction stores. Also a refractory mixture for furnaces can be cooked independently.

We are talking about refractory dry powders, which, after dissolving in water, are converted into a homogeneous mass. The preparation recipe is usually indicated in the accompanying instruction. Along with the usual components (sand and cement) in the solution there are special heat resistant additives.

The refractory mixture for masonry furnaces made in the enterprise has a number of advantages:

  • Well verified composition. In production conditions, careful dosage of each component is carried out, according to proven recipes and proportions.
  • Specific additives. Components informing the refractory mixtures of their “branded” characteristics, often do not come to free sale (and sometimes even keep secret).
  • Universality. As rules, industrial solutions have a multifunctionality: with their help you can lay furnaces, and then hold the plaster of finished walls.
  • Exterior aesthetics. Although the finishing finish is still used on top of the masonry or plaster, but it is much more pleasant to work attractive on the type of solution.

Especially loved by our cooking products of such manufacturers of masonry mixtures for furnaces and fireplaces: “Plovetonite”, “Terracot”, “Makarov”, “Sky”, “Skaneks”, “SPO”. As for the shortcomings of this type of materials, it is usually called their high cost. In cases where it is necessary to save finances, try to use independently prepared heat-resistant solutions.

Mixed masonry clay chamoite 20kg

Masonry mixture for furnaces and fireplaces “Terracot” Similar names: heat-resistant, heat-resistant, fire-resistant, furnace masonry mixture, furnace mortar and mix for masonry furnaces and fireplaces.Heat resistant masonry mixture “Terracot”. Ready-made composition for ensuring high-quality and reliable masonry of bricks in the furnace and other hot zones of heated objects (furnaces, fireplaces, mangals, barbecue, chimneys).

Review: Mixing Masonry Terracotta for furnaces and fireplaces. High quality and convenient mixture

After my unsuccessful experience of repairing a brick furnace with this mixture, our local liver advised to use this:

Having read in the store Composition, recommendations, etc., It was convinced that yes, the mixture is suitable: I needed to fill the collapsed seams:

And the composition of the mixture is more than suitable in the case of furnace work:

It can be seen that the mixture is fresh, without lumps, like flour:

See also  Glue for furnaces and fireplaces Fireproof Profix

What special instructions for the proportional composition of the mixture. No:

So mixed “on the eyes”. The most interesting thing is that according to the instructions lasted 1 hour and the solution did not thicken, but remained in the same condition:

The solution turned out to be very elastic, homogeneous, work with such a pleasure. Worked with him within an hour. The solution did not thicken, remained in the initial consistency. That is, his vitality is high.

I prepared the surface. In my case, it just rumbled with water and safely smeared distressed places:

Applied a solution with a rubber spatula, it is convenient to fill out emptiness.In my opinion, it turned out very well.The solution does not have absolutely no smell, and when hitting hands, it does not irritate and is easily washed off with ordinary water. This is excellent quality.

won 48 hours and only then flooded the oven for checking.

Result. nothing fell off and never crashed anywhere.

I spent the work in August, when it was possible and did not coat at all.When in October it was already necessary to coat more often, it turned out that after about 15-16 the firefall was all good. But now, when I drown out every day, in one place still the solution was cut:

But I think that this is only my wines: Or poorly moocked and the solution did not grab, or did not fill in the emptiness.

For your work, I used from the strength of 200 grams mixture. On the remnants of their solution “planted” brick in the bath. So he was glued tightly!

I needed a small packaging, 5 kg is quite enough, but sell in bags of greater weight. I liked the mixture. For further work (put the stove in the bath in the bath) I will buy only this!

Review: Mixing Masonry Terracotta for furnaces and fireplaces. Reliably, fast, economical

When laying a furnace or fireplace, special refractory compositions are used capable of withstanding significant temperature effects. An ordinary solution prepared on the basis of sand and cement after several intensive heating will cover cracks and sprinkled. Mixture of clay-chamoite terracotta masonry heat-resistant. Ready dry composition for the production of this kind of work.

The process of cooking from her solution is not time-consuming and does not take much time. Sufficiently according to the instructions on the package to pour in the desired proportion a mixture with water,

Mix the mixer (I used a drill with a wedge),

masonry, mixture, furnaces, fireplaces

Give a mixture to brush the mixture twenty minutes, re-mix, pre-dilute it with water to the desired consistency, and, using a spatula, you can start a fuel chamber masonry that you need to build from chamotte brick.Time of complete drying Three days, but the final fossil solution reaches only after firing. Clay is clay if it does not burn it, then when you get a moisture, it rushes and spreads. Therefore, if the construction is erected outdoors and the process of time has been dragged into, take care that the water does not fall on the masonry until you spend its control heating.By the way, warming up to do in several stages. The first is no more than 300 degrees for the final drying of the whole of your facilities, and the second is 800 degrees to achieve the final fossil in the solution, and only after that the furnace can be operated on the full program.Due to the fact that the thickness of the intergrpic seams is not more than 3 mm, the consumption of the mixture is economical. When erected at the cottage of the complex, the fireplace manbon and oven under the cauldron I cost two bags of 20 kg.The complex was regularly defended in the gazebo for two years, it is regularly used, and no defects in the fuel cells are observed.So you can safely use this mixture.

See also  Furnaces on the firewood of long burning with their own hands

Mix for masonry stoves terracotta 20 kg

“Terracot”. Ready-made composition for masonry and repair of external walls of street barbecue, mangalls, smoking, grills, as well as facial contours of outdoor furnaces and fireplaces. It is characterized by refractory, high strength and high water-retaining properties, ease of use, plasticity. The material is made of high-quality non-toxic raw materials, easy and conveniently applied on the surface. Retains its properties when heated to 1300 s.

All heat-resistant mixtures have identical with ceramic bricks the expansion coefficient, which eliminates the possibility of formation of cracks and breaks on the seams and plaster layers. Contain all the necessary components, so only the addition of water is required to quickly prepare the solution.

Advantages of the use of products “Terracot”:

  • Single expansion coefficient for all vintage products.
  • Ease when applying and aligning. than cement analogues.
  • Stable and plastic consistency provides increased clutch power, allows materials not cracking in wide seams, do not drain from vertical surfaces.
Color mix Osher-gray
Heat resistance 1300 C
Humidity of dry mix not 3%
Temperature application from 5 s to 60 s
Time of complete drying at least 50 hours

Pickup in G. Yekaterinburg, Pos. Koltsovo, ul. Bakhchivandzhi, D. 2A / 9.

Turning to our company you are guaranteed the following advantages:

  • We supply refractory mixtures for masonry furnaces and fireplaces wholesale and retail.
  • Our catalog contains the whole range of furniture of the furnace industry.
  • Calculate the required amount of materials. for free!
  • Make an order by phone, pay after delivery.

You can buy a high-quality mix for masonry fireplaces by calling by phone!

See also  Long burning furnaces for cottage on firewood

Mix for masonry stoves terracotta 20 kg

“Terracot”. Ready-made composition for masonry and repair of external walls of street barbecue, mangalls, smoking, grills, as well as facial contours of outdoor furnaces and fireplaces. It is characterized by refractory, high strength and high water-retaining properties, ease of use, plasticity. The material is made of high-quality non-toxic raw materials, easy and conveniently applied on the surface. Retains its properties when heated to 1300 s.

All heat-resistant mixtures have identical with ceramic bricks the expansion coefficient, which eliminates the possibility of formation of cracks and breaks on the seams and plaster layers. Contain all the necessary components, so only the addition of water is required to quickly prepare the solution.

Advantages of the use of products “Terracot”:

  • Single expansion coefficient for all vintage products.
  • Ease when applying and aligning. than cement analogues.
  • Stable and plastic consistency provides increased clutch power, allows materials not cracking in wide seams, do not drain from vertical surfaces.
Color mix Osher-gray
Heat resistance 1300 C
Humidity of dry mix not 3%
Temperature application from 5 s to 60 s
Time of complete drying at least 50 hours

Pickup in G. Yekaterinburg, Pos. Koltsovo, ul. Bakhchivandzhi, D. 2A / 9.

Furnace Refractory home made recipe you can make your self

Turning to our company you are guaranteed the following advantages:

  • We supply refractory mixtures for masonry furnaces and fireplaces wholesale and retail.
  • Our catalog contains the whole range of furniture of the furnace industry.
  • Calculate the required amount of materials. for free!
  • Make an order by phone, pay after delivery.

You can buy a high-quality mix for masonry fireplaces by calling by phone!

High quality and convenient mixture

Good day! After my unsuccessful brick furnace repair experience with this mixture. Our local Locker advised to use this: reading the store, recommendations, etc., I was convinced that yes, the mixture will fit: I need.

I started putting a stationary barbecue barbecue from the dacha and got a problem with choosing a mixture for masonry bricks. As it turned out not so simple, since the types of mixtures are very big and of course wanted.