How to make a decorative screen on the battery with your own hands

How can I hide the heating radiators, such familiar and necessary in our housing? Does the home master can afford to pass by such a field of activity? Hide the old radiator or create an incredible design that will decorate new devices. the task is simple. Manufacturing with their own hands the screen on the heating battery has not only aesthetic function, but often practical application. For example, you can come up with an extra surface for a lamp, books, various trifles or a small table for performing lessons reading books. In the children’s room, a special screen will save toddlers from burns, because the central heating systems are often sinning pressure jumps.

Screen on heating battery with your own hands

A little about the heat transfer of radiators

There are often cases when new aluminum or bimetallic radiators are knocked out of the interior, breaking it harmony. The finishing question is quite relevant and requires a special approach, because, establishing a decorative casing on the heating battery, its pleasant appearance is ensured, but the process of heat transfer from the device in the room is disturbed. Why is it going on and whether it is possible to avoid this, try to figure out before starting making the screen.

Thermal energy, highlighted in the room with a heating radiator, has 2 components: radiant and convective. The first is characterized by direct infrared radiation entering the room from hot surfaces of the battery. With a low heat carrier temperature (up to 50 ºС), the proportion of radiant energy is small, but at 60 ºС and higher it increases significantly. When a decorative battery is set, it is inevitably overlapping the way of the flow of this radiation, and therefore, part of the thermal energy into the house does not fall.

The exceptions are water heaters of convector-type, their facial surfaces are not hot and the radiant component is almost absent. But such heaters are rarely found.

Convective component is the transmission of thermal energy by the air. It also affect her panels for battles, as they create an obstacle on the way in the air passing through the ribs and other elements of the heating device. And in the case when the screen design is unsuccessful, part of the hot air just accumulates inside the box, without having the opportunity to go out.

A brief conclusion: By installing decorative screens for heating batteries, we violate the heat exchange process and part of the energy returns to the thermal network on the reverse pipeline. It’s not so scary in a private house where the system is located all over the house and this warmth will not leave any of it, but it will simply be given in another room. But in the case of the apartment, we simply give the worlds paid by our neighbors for riser, it must be understood.

Depending on how the battery decor is performed, the losses range from 3 to 7%. It is impossible to avoid them completely, but it is quite possible to reduce the screens.

Do it yourself: how to make a screen on the heating battery

In Scandinavia, the curtains are rarely hanging on the windows, so the radiators are always in sight. If they are old and not too closing or consist of small modules, in which dust is eternally clogged, the question arises in front of the tenants: how to hide the battery in the room. But in the store I almost did not meet screens for a decent radiator. Therefore, I decided to make them myself, using several wooden planks and a cut of flax. If you also do not know how to beautifully close the heating batteries. make the screen for the battery with your own hands!

There are many options how to hide the batteries in the apartment (in the photo): Mr. It is possible to purchase expensive beautiful radiators, but you can make a battery screen yourself

  • the cloth;
  • wooden planks, 150 x 300 mm (choose them depending on the size of your radiator);
  • hooks;
  • screws;
  • Electric screwdriver;
  • stapler;
  • If you have a plastic window sill, you will need a wooden plank or a plank, in which you can screw the parts for mounting the screen.

Measure the battery before hiding the battery. t transsively measure it. Specify the length of the window sill and the radiator is installed high on the floor. Leave about 5 cm from the floor, add 3-5 cm to the battery width (so that the screen is completely closed) and the same amount back from the bottom of the windowsill (to install holders there).

See also  How quickly the hair is growing after laser epilation

Cut Wooden Request Rakes according to your sizes. of which the screen will be. Before fastening the details of screws, drill holes in the rails to avoid wood breaks. Carefully install screws. To make the frame better, you can use glue.

I deciding how to hide the battery, remember that in addition to aesthetic function, the screen can also perform protective. for example, to protect children from burns. Therefore, choose enough tight fabric for it Severe the cloth for the screen when the screen frame will be ready, put it on the fabric. Before cutting the material, add 10-15 centimeters on each side. So a fabric that can sat down from heat radiator and humidity in the room will better keep the form.

Attach the fabric to the march with one of the short sides. Fold the fabric over the frame and with the help of a furniture stapler evenly attach the material to it, thoroughly stretched fabric. Repeat the same on the opposite side of the frame.

After that, attach the fabric to two long sides of the frame. Make sure that the fabric stretches uniformly, without sagging and folds.

Check the mounting cornering attention to the mounting of the corners. It is important that the fabric attached there is not sticking around when the screen will be installed. So try to carefully attach corners from the inside of the future screen.

Screw the hosterter you can go to the installation of fixtures. Their number depends on the length of the screen: for example, for my option (less than two meters long), there were enough hook pairs.

Squeeze the places of attachment on the windowsill (or attached to the rail) and on the screen. Then carefully screw the fastening details there. Be careful: do not hang the screen back to the battery. I would advise to retreat from the radiator 10 cm to allow air to circulate between it and the screen.

Fulling some heating radiators look not so bad, often there can be a wire or some details that you want to hide.

After that you hang the screen, the space below the window will immediately become more cute and neat.

Tip: Choose for a textile screen not too thick fabric so that the air exchange is not broken and the screen surface did not overheat.

Photohoot: 22 ideas, how to make screens for radiators

Batteries under the window or along the wall. not the most attractive part of the interior. It is not so easy to remove and transfer them, so it remains a more affordable option. to disguise them with a radiator screen.

We study the implemented projects of designers and architects and look at how to hide radiators from the eye.

one. Screen for a battery made of metal lattice of this compact studio Bedroom made on the site of a former kitchen with loggia. The loggia was joined, insulated, and the radiator with a dismantled windows block was moved to the side wall within the rooms of the room, so that the redevelopment was legitimate.

“We had the opportunity to drown a radiator in a niche, which we took advantage. Niche was closed with a metal grid: these are ventilation grilles, which are covered with hood in the bathrooms. These are standard sizes and colors (usually bronze, brass, chrome), but are made to order in the desired size and colors (by RAL). Such a lattice costs about 5,000, cheaper than a standard screen for a fiberglass radiator, “the designer notes. With this option, easy access to the radiator is saved: the grille is attached to the screw and removed using a conventional screwdriver.

SEE ALSO… photos from this project in the profile of the designer

Screen for the radiator in the form of a chest in this apartment decided to attach a large loggia. And the radiator in the wall adjacent to it was covered with a non-standard way. Red chest of drawers. actually screen for radiator. “This pretty design was born due to the difficult introduction,” the designer says.

Location: Moscow Project Author: Masha Kunyakina

SEE ALSO… photos from this project in the profile of a designer

Screen for heating Battery from Wine Wine Fabric. Customer Mom’s Choice. It turned out that it is not only not afraid, but also loves saturated colors. “Very cheerful woman. recalls the designer Anna Yarovikova When painted the walls, of course, there were doubts, but as a result, customers were so inspired by the interior, which even acquired a picture with even more accent colors. “. And in support of this saturated color. sliding shutter screens for the radiator from the wine tissue planted for the Rail.

SEE ALSO… photos from this project in the profile of designers

See also  Why after laser hair removal is not in the sauna

Screen on a tree battery This apartment designer decorated a week: the gloomy interiors of the apartment with Soviet legacy and the details of the European repair turned into a bright space with bright accents. Behind a black box resembling a fireplace portal, hid an old battery. The finished base of plasterboard left by the same owners, told the boards from Leroy Merlin, supplemented with decorative dies and painted glossy piano enamel. Project author: Polina Anikeeva Location: Moscow

SEE ALSO… photos from this project in the profile of the designer

Screen on a fibril-plane battery Screens for radiators form one whole with a windowsill and resemble a trench, descending from the window opening. The screens were milling: “If they were cut by a laser, a melted brown slice would remain, and the milling allowed everything without a” bitch and zadorinka “. It turned out a normal slice of a lively fibreboard, “explains the architect Alexander merchants.

SEE ALSO… photos from this project in the profile of architects

The screen on the tree battery due to the design protrusions the living room has the wrong form, but this feature was turned into an advantage Built racks. The TV zone was allocated in volume and color. The radiator, which was under the screen, decided not to tolerate: just closed with black slats to distract attention from him. Project author: Olga Pogorelova, Pogorelova Olga Designer Place: Belgorod

8 SIMPLE INVENTIONS

SEE ALSO… photos from this project in the profile of the designer

Screen on the battery from plywood In this project, the owner allocated 800 thousand to all, including furniture, equipment and decor. So designers used inexpensive and easily accessible finishing materials: paint for walls, pine outdoor board, white tile, birch fane. One of the finds. plywood design along the windows, replaced the usual battery screen. These are shallow cabinets with shelves for storing books, dishes and friends of their trifles. Holes in facades perform the role of pens, and also serve to circulate heat.

SEE ALSO… photos from this project in the profile of designers

eight. Screen on the plywood battery in this project All radiators are closed with carved screens. For the kitchen chose an option with a patterned plywood grid with laser thread.

SEE ALSO… photos from this project in the profile of the designer

nine. Screen for radiator and bench under the window to reconstruction House Ogibal Glazed Winter Garden in the form of letter G. The owners decided to refuse him, and due to this it turned out to increase the area of ​​the double living room. It is open and for the outside world. through panoramic windows you can see the garden. To admire nature more convenient, radiators hid behind decorative screens, organizing there additional seats there. So that the warm air passed without obstacles, ventilating holes are done in the seats.

SEE ALSO… photos from this project in the profile of architects

How to make a screen on a tree battery?

As mentioned above, the tree is considered the most popular material for the manufacture of decorative panels. The manufacture of wooden screens for batteries requires a minimum of labor costs, and the finished design can be covered with varnish, paint or apply an artistic painting on its surface. In any case, the wooden screen will have a presentable appearance. Consider how to make screens for batteries with your own trees.

Oak or Bookboard Suitable for Wooden Screen

Experts allocate two main wood species that are used to make such structures:

These materials are proven times, distinguished by reliability and durability. The peorized panel itself can be made from the rifer.

The easiest screen on the heating battery is considered a wooden screen having a front panel of a rush canvas, condensed around the perimeter with a wooden oak or beech frame. The location of the rail can be anyone and depends on the desire of the owners.

Another kind of wooden dampers for heating devices is considered a special shutter screen. Such a design, from a constructive point of view, resembles wooden blinds that are installed on the windows. In order for the rails to be located at the same angle to the plane, you need to perform parallel rods on the side racks. It is recommended to perform two cuts, as the rails are usually wider than two times than a tree hacksaw. Everything is too much removed by the chisel.

One very important requirement is put forward to wood for the manufacture of the screen. the material humidity coefficient should not exceed 12%. Otherwise, the proximity to the heating device will lead to wood deformation. At home check the level of humidity is quite simple: you need to take a shallow chips and tie it into the knot. If the node is premounced, then the material is sufficiently dry and can be used.

A typical screen and dampers in the form of blinds require the use of carefully polished rails. After fixing the rails to the wooden frame, it is necessary to perform their priming, as well as to cover these parts by varnish (preferably in 2 layers), paint or enamel.

See also  Refrigerator from sandwich panels do it yourself

You can execute a screen from plywood. In order to make the front peorized panel from plywood will need a special tool. Lobzik. Using it in advance prepared stencils produced a guide, so you can get a screen with any pattern.

Important! Wood-chipboard and plywood have different characteristics and are divided into classes. To execute the screen from these materials it is necessary to choose the appropriate class. For plywood, it should be E1, for a tree-stove. E0.

screen, battery, yourself, tree

Design and physics

Recall from school: best emits and absorbs absolutely black body. The outer screen should absorb IR from the battery and then emit it to the room. For this, he, first of all, must have a good thermal conductivity, so that the absorbed IR does not return to. Secondly, what it will be darker, the better. How to re-establish a battery outside. a matter of above all taste; But the outline of the screen in any case should be painted with black.

screen, battery, yourself, tree

Let us explain on the example: let’s say a black screen; The absorption coefficient according to IR k = 0.8. Absorbs radiation on the one hand emits in both. The thermal conductivity of the screen material is also not infinite. Reverse radiation will additionally warm the battery, it will emit stronger. The exact calculation is quite complicated, requires knowledge of higher mathematics, but the final result is simple: 1, divided into the root square of 2, is multiplied by the square K. That is, the room will leave 0.707×0.64 = 0.453 from the standard IR stream.

It is already less than that “pull out” an aluminum radiator with profiled channels with a degraded convection. With a bright screen, heat transfer in the room will still worsen. Where unused warmth is going? Goes into the feeding pipe, and you still pay for it. Can I fix things? Yes, you can. First of all. additional thermal shielding from the wall.

What needs to be done to increase the battery efficiency with the screen

The screen to some extent reduces the heat from the surface of the battery. That is, the temperature difference of the coolant between direct feed and the return will be less.

Talking about an unique deterioration of the speed of convection due to the availability of the screen can not. It is enough to bring in an example electrical convectors, in which the heating element is located in the case in the form of a box having an inlet from below, and the outlet from above. Such a device even improves convection, since the box performs the role of a vertical duct that increases the flow rate.

But what is good for convectors, not suitable for radiators. The battery also works for convection, and radiation (radiation). And some part of infrared radiation absorbs, and somehow reflects back. And if the thermal energy absorbed by the screen creates conditions for secondary convection, then reflected. heats the facade. This warmly can be forced to work on the heating of the room. Even under normal conditions (without screen), it is recommended to establish a reflective plane for the radiator that returns to the room infrared radiation from the inner surface of the battery. Usually use foil polyplex (or similar material). When installing the screen, such a recommendation is doubly relevant.

Screen from rattan

It is a very beautiful option, but quite expensive. A decorative screen with a rating facade in value will be every 10 more expensive than the metal option and is identical to the product from a natural tree.

Rotange canvas in our country will be brought already in the finished form in the standard widths of the standard width: 60, 74 and 90 cm. Recently, an artificial rattan appeared on the building materials market, which is made on a paper basis and further paints. The cloth of such a material may have a width of 60 and 90 cm. Another excellent option. artificial rattan from PVC. It is produced only in white and yellowish color and only 60 cm wide.

It is important to choose high-quality artificial rattan from a solid manufacturer so that in the heating season your room is not filled with harmful evaporation.

According to the technology, the manufacture of the box is almost the same as described above, the only difference is that the grid is created from the rattan. And the framing is best made from wooden planks.