Installing the decorative screen on the heating battery: briefly

The screen on the heating battery is a design in the form of a sheet or a box, which is attached to the radiator or on it and performs several functions: protective, decorative, heat distribution. Professional installation of screens on heating batteries will provide aesthetic appearance, prevent damage to the radiator, screen, floor and windowsill.

Moscow qualitatively, neatly and reliably installs screens from different materials and any design on heating batteries. The big practical experience of the company’s employees allows them to find non-standard solutions when installing screens in modern private homes and houses of the old building. Masters of the company are provided and perfectly owning modern tools, which guarantees high installation quality.

About heat transfer

The heating battery hidden behind the elegant decorative screen will add positive emotions to our life. Such a thing can not only hide unsightly old structures, but also to become part of the style design of the room. Thinking to create something ambitious for radiators in its apartment, it is worth not to forget about the conservation of heat transfer device.

Thermal energy consists of two parts:

  • Rays. Stands out by flows of infrared radiation from the heated surface of the radiator. If it is heated to 50 ° C, then the share of such energy is. When increasing the temperature, the radiation capacity increases.
  • Convective. Heat from the battery is transmitted by mixing hot and cold air.

The decorative screen on the radiator will inevitably block access to the streams of two energies, therefore, part of the heat into the house will not go. With unsuccessful structures in the form of a box, hot air will partially accumulate inside without the possibility of outgoing. The process of heat exchange is broken, part of the heat will simply go into the nearby room. When packing the radiator in a beautiful box, 3-7% of heat is lost. It is impossible to avoid fully this loss, but there is a possibility of its reduction. To do this, you need to correctly select the screen design.

It is important! The screen installed on the radiator is responsible for the distribution of infrared streams and the air distribution. Therefore, the facial part of the design should have a lot of holes.

It is interesting: gas boiler on balloon gas propane

Types of screens for radiator

Modern building market provides various materials and tools to fulfill its ideas. Consider various options.

Metal screens

They have good thermal conductivity and affordable cost. Thermal energy losses are only 3%. For the manufacture can be approached by a thin-sheet metal, topped with a polymer film. There are various shades of such a coating. But it’s not so easy to work with the metal.

Wooden screens

Good, eco-friendly option. Fantasy performer is not limited. But for boxes and decorative grilles, they pick up well-dried wood. Then the natural structure of the material and beauty will help perform a spectacular model. After the manufacture of the screen, it is necessarily covered by a special composition. Otherwise the formation of cracks and deformation. Requires permanent care.

Plastic screens

This material is poorly carried out and can breed from the effects of hot temperatures. It is plastic inexpensive and looks neat. But it is not necessary to acquire cheap options that, when heated, begin to distribute the chemical smell and allocate harmful substances.

Warfather Screens

The most common option for decorating heating radiators. Not so capricious in care like a tree, easy to handle even at home. Material is distinguished by durability and durability. And the price is the most democratic among the analogues.

Selection of material for screen

Before proceeding with the manufacturing process, you need to select material for trim. The speed and simplicity of performance, as well as the effectiveness of the heat transfer of the battery on the screen depends on.

Plastic is not recommended to use because it has a bad thermal conductivity, it is not very difficult to process it. In addition, such material under the influence of heat can be swallowed and covered with spots, and in a few years. lose its attractiveness.

Alternatively, you can apply metal. excellent heat conductor. That’s just for the construction of construction from this material, skills and special tools are needed.

Ready Facade of a Tree Screen

The tree is an environmentally friendly material that is characterized by ease of operation.

The only and main minus is the bad conductivity of the heat that cannot be improved. But still a properly manufactured screen of wood can be quite effective. And beauty is already laid in the very texture of natural wood.

Some use rattan to create such a design. This is an environmentally friendly braid material from the dried stems of Calamus. Especially popular Furniture made of rattan. This material will also exceed the battery box perfectly.

Plasterboard. a good option, however, it is quite often cracking and peeling from overheating. But if desired, its condition can be improved and make an excellent box for the battery and separate the most different ways. to choose.

Gypsum Battery Screen

Do it yourself: how to make a screen on the heating battery

In Scandinavia, the curtains are rarely hanging on the windows, so the radiators are always in sight. If they are old and not too closing or consist of small modules, in which dust is eternally clogged, the question arises in front of the tenants: how to hide the battery in the room. But in the store I almost did not meet screens for a decent radiator. Therefore, I decided to make them myself, using several wooden planks and a cut of flax. If you also do not know how to beautifully close the heating batteries. make the screen for the battery with your own hands!

There are many options how to hide the batteries in the apartment (in the photo): Mr. It is possible to purchase expensive beautiful radiators, but you can make a battery screen yourself

  • the cloth;
  • wooden planks, 150 x 300 mm (choose them depending on the size of your radiator);
  • hooks;
  • screws;
  • Electric screwdriver;
  • stapler;
  • If you have a plastic window sill, you will need a wooden plank or a plank, in which you can screw the parts for mounting the screen.

Measure the battery before hiding the battery. t transsively measure it. Specify the length of the window sill and the radiator is installed high on the floor. Leave about 5 cm from the floor, add 3-5 cm to the battery width (so that the screen is completely closed) and the same amount back from the bottom of the windowsill (to install holders there).

Cut Wooden Request Rakes according to your sizes. of which the screen will be. Before fastening the details of screws, drill holes in the rails to avoid wood breaks. Carefully install screws. To make the frame better, you can use glue.

I deciding how to hide the battery, remember that in addition to aesthetic function, the screen can also perform protective. for example, to protect children from burns. Therefore, choose enough tight fabric for it Severe the cloth for the screen when the screen frame will be ready, put it on the fabric. Before cutting the material, add 10-15 centimeters on each side. So a fabric that can sat down from heat radiator and humidity in the room will better keep the form.

Attach the fabric to the march with one of the short sides. Fold the fabric over the frame and with the help of a furniture stapler evenly attach the material to it, thoroughly stretched fabric. Repeat the same on the opposite side of the frame.

After that, attach the fabric to two long sides of the frame. Make sure that the fabric stretches uniformly, without sagging and folds.

Check the mounting cornering attention to the mounting of the corners. It is important that the fabric attached there is not sticking around when the screen will be installed. So try to carefully attach corners from the inside of the future screen.

screen, battery, your, hands

Screw the hosterter you can go to the installation of fixtures. Their number depends on the length of the screen: for example, for my option (less than two meters long), there were enough hook pairs.

Squeeze the places of attachment on the windowsill (or attached to the rail) and on the screen. Then carefully screw the fastening details there. Be careful: do not hang the screen back to the battery. I would advise to retreat from the radiator 10 cm to allow air to circulate between it and the screen.

Fulling some heating radiators look not so bad, often there can be a wire or some details that you want to hide.

After that you hang the screen, the space below the window will immediately become more cute and neat.

Tip: Choose for a textile screen not too thick fabric so that the air exchange is not broken and the screen surface did not overheat.

Photohoot: 22 ideas, how to make screens for radiators

Batteries under the window or along the wall. not the most attractive part of the interior. It is not so easy to remove and transfer them, so it remains a more affordable option. to disguise them with a radiator screen.

We study the implemented projects of designers and architects and look at how to hide radiators from the eye.

one. Screen for a battery made of metal lattice of this compact studio Bedroom made on the site of a former kitchen with loggia. The loggia was joined, insulated, and the radiator with a dismantled windows block was moved to the side wall within the rooms of the room, so that the redevelopment was legitimate.

“We had the opportunity to drown a radiator in a niche, which we took advantage. Niche was closed with a metal grid: these are ventilation grilles, which are covered with hood in the bathrooms. These are standard sizes and colors (usually bronze, brass, chrome), but are made to order in the desired size and colors (by RAL). Such a lattice costs about 5,000, cheaper than a standard screen for a fiberglass radiator, “the designer notes. With this option, easy access to the radiator is saved: the grille is attached to the screw and removed using a conventional screwdriver.

SEE ALSO… photos from this project in the profile of the designer

Screen for the radiator in the form of a chest in this apartment decided to attach a large loggia. And the radiator in the wall adjacent to it was covered with a non-standard way. Red chest of drawers. actually screen for radiator. “This pretty design was born due to the difficult introduction,” the designer says.

Location: Moscow Project Author: Masha Kunyakina

SEE ALSO… photos from this project in the profile of the designer

Screen for heating Battery from Wine Wine Fabric. Customer Mom’s Choice. It turned out that it is not only not afraid, but also loves saturated colors. “Very cheerful woman. recalls the designer Anna Yarovikova When painted the walls, of course, there were doubts, but as a result, customers were so inspired by the interior, which even acquired a picture with even more accent colors. “. And in support of this saturated color. sliding shutter screens for the radiator from the wine tissue planted for the Rail.

SEE ALSO… photos from this project in the profile of designers

screen, battery, your, hands

Screen on a tree battery This apartment designer decorated a week: the gloomy interiors of the apartment with Soviet legacy and the details of the European repair turned into a bright space with bright accents. Behind a black box resembling a fireplace portal, hid an old battery. The finished base of plasterboard left by the same owners, told the boards from Leroy Merlin, supplemented with decorative dies and painted glossy piano enamel. Project author: Polina Anikeeva Location: Moscow

SEE ALSO… photos from this project in the profile of the designer

Screen on a fibril-plane battery Screens for radiators form one whole with a windowsill and resemble a trench, descending from the window opening. The screens were milling: “If they were cut by a laser, a melted brown slice would remain, and the milling allowed everything without a” bitch and zadorinka “. It turned out a normal slice of a lively fibreboard, “explains the architect Alexander merchants.

SEE ALSO… photos from this project in the profile of architects

The screen on the tree battery due to the design protrusions the living room has the wrong form, but this feature was turned into an advantage Built racks. The TV zone was allocated in volume and color. The radiator, which was under the screen, decided not to tolerate: just closed with black slats to distract attention from him. Project author: Olga Pogorelova, Pogorelova Olga Designer Place: Belgorod

SEE ALSO… photos from this project in the profile of the designer

Screen on the battery from plywood In this project, the owner allocated 800 thousand to all, including furniture, equipment and decor. So designers used inexpensive and easily accessible finishing materials: paint for walls, pine outdoor board, white tile, birch fane. One of the finds. plywood design along the windows, replaced the usual battery screen. These are shallow cabinets with shelves for storing books, dishes and friends of their trifles. Holes in facades perform the role of pens, and also serve to circulate heat.

SEE ALSO… photos from this project in the profile of designers

eight. Screen on the plywood battery in this project All radiators are closed with carved screens. For the kitchen chose an option with a patterned plywood grid with laser thread.

SEE ALSO… photos from this project in the profile of the designer

nine. Screen for radiator and bench under the window to reconstruction House Ogibal Glazed Winter Garden in the form of letter G. The owners decided to refuse him, and due to this it turned out to increase the area of ​​the double living room. It is open and for the outside world. through panoramic windows you can see the garden. To admire nature more convenient, radiators hid behind decorative screens, organizing there additional seats there. So that the warm air passed without obstacles, ventilating holes are done in the seats.

SEE ALSO… photos from this project in the profile of architects

Alternative option

If there is no possibility of acquiring or making a decorative screen, then you can apply an alternative. To do this, you can use oil paints and apply a beautifully decorated pattern on the thermal battery.

Battery Powered E-Paper COVID19 Display. ESP32 (trigBoardv8)

Important! It is necessary to apply the drawing not only on the radiator, but also to use the wall area near the battery. In this case, the effect of the absence of a bulk space is created, since the facial panel of the radiator and the wall surface represent one plane.

Screen from rattan

It is a very beautiful option, but quite expensive. A decorative screen with a rating facade in value will be every 10 more expensive than the metal option and is identical to the product from a natural tree.

Rotange canvas in our country will be brought already in the finished form in the standard widths of the standard width: 60, 74 and 90 cm. Recently, an artificial rattan appeared on the building materials market, which is made on a paper basis and further paints. The cloth of such a material may have a width of 60 and 90 cm. Another excellent option. artificial rattan from PVC. It is produced only in white and yellowish color and only 60 cm wide.

It is important to choose high-quality artificial rattan from a solid manufacturer so that in the heating season your room is not filled with harmful evaporation.

According to the technology, the manufacture of the box is almost the same as described above, the only difference is that the grid is created from the rattan. And the framing is best made from wooden planks.