How to connect the Xiaomi vacuum cleaner to Wi-Fi: step-by-step instruction with video

Step-by-step instructions for connecting Xiaomi vacuum cleaner to the phone via Wi-Fi. Video Overview of All Stages of Connection. What problems may occur when connecting Xiaomi’s vacuum cleaner to the MI HOME application.

It happens that Xiaomi Roborock does not connect to Wi-Fi. Then you need to check the program through the program. Also, if the vacuum cleaner does not support Wi-Fi 5 GHz, then, when connecting the device to the router, all specialists should be excluded in the network name; configure control from another phone; Download the updated version of the program through another provider; Reset the settings of the vacuum cleaner. After that everything should work.

Xiaomi Roborock S50 is expensive, but the necessary purchase, especially now, when many each minute in the account and cleaning in the house there is practically no time. Connecting a vacuum cleaner to the Internet solves many problems and opens up a lot of opportunities that do not require human participation in the process, about which several years ago it was possible to dream.

Reset ROOMBA settings to factory settings

If you think that the ROOMBA has failed in the system, be sure to reset to the factory settings of the ROOMBA vacuum cleaner following the instructions below.

  • Press and hold the Clean button on the robot for 20 seconds.
  • Then release the button, and the light ring on the lid of the garbage can be rotated clockwise and will become white.
  • Press and hold the Clean button on the robot for 20 seconds.
  • Release the button, and the light ring will start rotating clockwise in white color.
  • On the inclusion of a robot can go to a pair of minutes.
  • Turn off the ROOMBA vacuum cleaner Remove the ROOMBA vacuum cleaner from the charging station.
  • Simultaneously press and hold the Dock and Spot buttons to the green indicator goes.
  • Then you have to wait at least 10 seconds.
  • Now quickly release the buttons as soon as you see that the green light went out.
  • You will hear a beep, meaning that the ROOMBA vacuum cleaner is loaded.
  • Then install the ROOMBA to the charging docking station and wait until the green light goes. If you are not sure, your robot vacuum cleaner has rebooted or not, just click the Watch button.
  • If you see that all the clock settings are dropped, it means that the robot vacuum cleaner is completely reset.

How to configure Wi-Fi connected Roomba

Irobot has several different models of ROOMBA vacuum cleaners, but ROOMBAS connected to Wi-Fi is definitely one of the most convenient. You can run or plan cleaning from your phone, call in Roomba from your phone, if you can’t find it, and even start cleaning with Alexa or Google Assistant. If you just got ROOMBA with Wi-Fi support, this is how to do it.

To start, download the IROBOT HOME application for iOS or Android. When you first start the application, select your country and language, and then click “Accept Conditions”.

Next you will need to either create your ROOMBA account, or enter it. If you have an existing account, click “Log in”. If not, click “Create Account”.

On the next screen, click the type of device that you have. If this is a vacuum cleaner robot model, select ROOMBA. If you have a brawa jet robot, click on it below. After that click “Set up a new room”.

At this stage, the application will guide you through several basic steps setting in your home. First find the docking station supplied with your ROOMBA, and connect it to the wall. Place the station close to the wall in the place where ROOMBA can easily get to it and leave the way to it free.

Next Turn the ROOMBA and delete all plastic tabs or packaging.

See also  Water does not come in dishwasher Electrolux

Then install your ROOMBA to charging docking station. It will need to charge a few hours before his first launch. You can continue the installation process on your phone while your ROOMBA is charging.

Returning to the phone, the application will connect your ROOMBA to the Wi-Fi network to which the phone is currently connected. Please note that if you are not in your own Wi-Fi home network, you need to switch to it before continuing. Click “Continue” and on the next screen Enter your Wi-Fi Password and click Continue.

On the ROOMBA itself, press and hold the buttons with the target icon and the home icon until ROOMBA erupts the beep. Your vacuum cleaner will take a minute to connect to your Wi-Fi network. As soon as it is done, you must see the screen similar to the screen shown.

On the next screen, you can anthropomyize your vacuum cleaner, giving him a name and even confirming it “Birthday”. Happy birthday, buddy.

robot, vacuum, cleaner, does, connect, wi-fi

After short playback of the video, introducing you from ROOMBA, you will fall on the main screen application. You can click a large round button “Clear” to start cleaning now (although you should wait a while to charge the vacuum cleaner), or press the middle button at the bottom of the screen to schedule daily cleaning.

Your Roomba can work mainly unattended, but remember that you still have to collect things and keep the floors mostly clean, if you want it to be effectively cleaned. Vacuum will spread around most of the disorder (until he can fit under the ROOMBA itself), but it will be another point that your robot cannot clean. While your roomba is charging, clean the rooms in which your bot will vacuum.

How to configure Wi-Fi connected Roomba

Irobot has several different models of ROOMBA vacuum cleaners, but ROOMBAS connected to Wi-Fi is definitely one of the most convenient. You can run or plan cleaning from your phone, call in Roomba from your phone, if you can’t find it, and even start cleaning with Alexa or Google Assistant. If you just got ROOMBA with Wi-Fi support, this is how to do it.

To start, download the IROBOT HOME application for iOS or Android. When you first start the application, select your country and language, and then click “Accept Conditions”.

Next you will need to either create your ROOMBA account, or enter it. If you have an existing account, click “Log in”. If not, click “Create Account”.

On the next screen, click the type of device that you have. If this is a vacuum cleaner robot model, select ROOMBA. If you have a brawa jet robot, click on it below. After that click “Set up a new room”.

At this stage, the application will guide you through several basic steps setting in your home. First find the docking station supplied with your ROOMBA, and connect it to the wall. Place the station close to the wall in the place where ROOMBA can easily get to it and leave the way to it free.

robot, vacuum, cleaner, does, connect, wi-fi

Next Turn the ROOMBA and delete all plastic tabs or packaging.

Then install your ROOMBA to charging docking station. It will need to charge a few hours before his first launch. You can continue the installation process on your phone while your ROOMBA is charging.

Returning to the phone, the application will connect your ROOMBA to the Wi-Fi network to which the phone is currently connected. Please note that if you are not in your own Wi-Fi home network, you need to switch to it before continuing. Click “Continue” and on the next screen Enter your Wi-Fi Password and click Continue.

On the ROOMBA itself, press and hold the buttons with the target icon and the home icon until ROOMBA erupts the beep. Your vacuum cleaner will take a minute to connect to your Wi-Fi network. As soon as it is done, you must see the screen similar to the screen shown.

On the next screen, you can anthropomyize your vacuum cleaner, giving him a name and even confirming it “Birthday”. Happy birthday, buddy.

After short playback of the video, introducing you from ROOMBA, you will fall on the main screen application. You can click a large round button “Clear” to start cleaning now (although you should wait a while to charge the vacuum cleaner), or press the middle button at the bottom of the screen to schedule daily cleaning.

See also  Dust class for vacuum cleaner l what is

Your Roomba can work mainly unattended, but remember that you still have to collect things and keep the floors mostly clean, if you want it to be effectively cleaned. Vacuum will spread around most of the disorder (until he can fit under the ROOMBA itself), but it will be another point that your robot cannot clean. While your roomba is charging, clean the rooms in which your bot will vacuum.

How to set up a robot vacuum cleaner without applications

In the production of the vacuum cleaner “Xiaomi” in its configuration, some application is not supposed. Because to reveal the entire functionality of the device, you must do the following:

  • Connect the stationary design to the network, remove extra leashes into a special nest.
  • The base is so. Around it separate a large number of free space and put a robot vacuum cleaner.
  • If you are afraid that allow an error when installing, the light bulb on the rear contacts will report this flair.
  • Permanent glow indicates a complete charge of the battery and the readiness of the vacuum cleaner to work.
  • The color of the backlight means how the device is or discharged or discharged. Thus, red. no more than twenty percent, yellow is half, and white indicates a full scale of energy.

How to connect Xiaomi vacuum cleaner to phone (mi home)

Congratulations to buy Xiaomi’s robot vacuum cleaner. Below you learn how to connect Xiaomi vacuum cleaner to Wi-Fi through the app on Android or iPhone. And at the end of the page files for download: Synchronization of the vacuum cleaner with the application and instructions for the robots-vacuum cleaners (by clicking on the link, select Your Model).

robot, vacuum, cleaner, does, connect, wi-fi

Connection

To connect Xiaomi vacuum cleaner to iPhone or Android you will need the MI HOME application. With the help of which from your smartphone via Wi-Fi network, you will choose a smart vacuum cleaner. Links to download from official resources (opens in a new tab):

Apple, iOS 9.0 or later. Android, version 4.3 and above
Link to the App Store, ~ 467 megabytes Link to Google Play, ~ 88 megabytes

We advise you to download via Wi-Fi, the files weigh a lot, especially for iPhone and iPad.

Smartphone Connect to Wi-Fi networks at frequency 2.4 GHz. Go to the MI Home app, log in or register (if for the first time). Press the plus sign in the upper right corner “”.

Before connecting the robot vacuum cleaner xiaomi mi home app make sure it is charged, t.to. When you first turn on it can be updated.

Now turn on Bluetooth, and look for a firmware nearby. If for some reason it was not possible to find the device automatically, then you can make it manually. In the Household Appliances tab, select Your Model. If it is not in the list, then change your region to “China”.

Next addition to ask to perform a reset, for this heal 2 of 2 buttons or 2 extremes of 3, depending on the model; Wait for a voice signal in Chinese or Anline. All, the FIU is dropped.

Choose your Wi-Fi network in the next tab, excellent. Synchronization and update of the smart vacuum cleaner. Well, then the setting to taste.

Functional

On the main screen of the application, the room is displayed in the center, compiled by a robot vacuum cleaner and its current position location. At the top of the vacuum cleaner and the current cleaning mode.

Information about the distance traveled, temporary cleaning range, battery level at the bottom of the screen.There you can start or stop cleaning.

  • Button “Go”. send a robot to a certain place for unscheduled cleaning.
  • Button “Dock Station”. send to charge station for charging.
  • Button “Clear” launch sequential cleaning.
  • Button “Zoned Cleaning”. choose the specified area of ​​the room you want to remove.

In the upper right corner there are three points, they open additional settings.

Additional settings

  • “Timer”. set the time interval, in the range of which can be cleaning automatically.
  • “Voice and volume”. changing voice packets and volume voice notifications.
  • “Cleaning Mode”. choose the intensity of cleaning of the room: quiet, turbo, balanced and turbo mode.
  • “Cleaning History”. Record Cleaning Information. Removed area, beginning and end of cleaning time.
  • “Remote control”. manual control, if necessary or have fun.
  • “Card save mode” Adding virtual walls.
  • “Carpet Mode” specifically for improved carpet cleansing.
  • “DND mode (Do Not Disturb)” in the selected period of the vacuum cleaner will not perform cleaning and publish voice notifications.
See also  Does not do water in the drum washing machine

Now you know how to connect Xiaomi vacuum cleaner and all its functions.

Good to know

  • Can be managed with the help of the voice assistant “Alice”.
  • If it fails to connect the Xiaomi vacuum cleaner to Wi-Fi. the document below describes the tips, how to solve this problem.

Installation of interaction with charging base

Before moving to the synchronization of the robot vacuum cleaner and your mobile device, you must configure the interaction of the apparatus with the base station. This requires the following actions algorithm:

iRobot WiFi connection problems: FIXED. quick & easy Roomba setup issues resolved

  • Connect the charging database to the electrical network and remove the excess cable into a special jack.
  • Note that the dock station is correctly installed: the front distance of 100 centimeters should be on the front from the charging base, and the left and right. 50 centimeters. If the rear contacts are installed correctly, the light bulb will flash on the top panel.
  • If the light bulb does not flash, and the light burns constantly, it will mean a complete charge of the battery. For further operation of Xiaomi, you must click the robot-vacuum cleaner.
  • If the light bulb is white, then the battery is sufficient, yellow. up to 50%, red. less than 20%.

It is also important to consider that before the first use of the robot, you need to remove the padded cables and minor items from the floor so that they do not prevent the movement of your smart vacuum cleaner.

Next, consider how step by step connect the Xiaomi vacuum cleaner to the Mi Home application on Android and iOS.

Opportunities MI HOME Applications

Depending on the model of your robot vacuum cleaner, its functions may differ, but the basic features of the application are the same.

The main screen shows the room map after he built it, and its current location. From above indicated the name of the robot and its status (for example, “ready”), the slazed area is also displayed, the battery charge level and the duration of cleaning (see. Picture above). From this page you can run or stop cleaning.

If you click on the “Dock Station” button, the robot will go to charging. “Clear”. Runs cleaning. “Zone”. allows you to select a specific zone on the map for cleaning.

On the right at the bottom of the screen there is a cleaning mode selection button. quiet, balanced, turbo, max.

In order to access additional settings, you need to click on 3 points in the upper right corner. For example, Xiaomi Roborock S50 is available:

  • “Settings of the vacuum cleaner“. you can control the card to adjust the virtual walls and the forbidden zones; include carpet mode to automatically increase suction power; Select the time zone, set the time when the vacuum cleaner will not clean and publish voice alerts (for example, at night).
  • “Timer”. you can set the time of automatic cleaning;
  • “Voice and volume”. adjust the volume of voice alerts and change the voice;
  • “Go”. you can send a vacuum cleaner anywhere on the map;
  • “Remote control”. manual management of the robot;
  • “History of cleaning”. the total time is displayed, the total area and the total number of cleaning, records of the start time, duration of each cleaning and purified area;
  • “Service”. the state of consumables (filter, side and main brushes, sensors) is shown;
  • “User Guide”. Useful information about maintenance, cleaning of dust collector and filter, etc.

Menu of additional settings of the Xiaomi vacuum cleaner.

Other models of Xiaomi vacuum cleaners are connected in a similar way. If you have any questions, you may find answers in this article.