Heat insulation plates for a warm floor

Heat-insulating plates for a warm floor are modern universal products for styling heating in private houses and apartments, offices and other facilities. They have a strong coating of a film type for the formation of a reliable heat insulating layer, there is also a lower sound and heat insulating layer. The use of these products allows to reduce the full heating time of the floor and reduces heat loss during operation, which leads to a reduction in fuel / electricity consumption.

Tiles for floor insulation have a wide list of advantages:

  • Hygienic. Resistant to the development of mold and fungus.
  • High strength. This ensures resistance to various damage and deformations, affects adverse environmental factors.
  • Ease. Light weight greatly facilitates transportation and installation.
  • Durability. The use of plates for thermal insulation is from 10 years and more.
  • Fire safety.

Interlocking rubber flooring mat:How to lay rubber lock mats without glue!!!!

For thermal insulation system Dry warm floor Material: polystyrene foam 16f (PSB-C 25F) Thickness Mata: 40 mm List size: 1000 mm x 1000 mm Density: 16-20 kg / m3 Pipe styling step: multiple 5 cm Pipe diameter: 16 mm color. white

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1000 x 500 x 40 mm Area Effective. 0.5 m2 The thickness of the heat insulating layer. 20 mm height of buses. 20 mm Pipe laying step. 50 mm Coating. no diameter of the applied pipe. 16-20 mm dynamic strength. 30 MN / M3 thermal conductivity coefficient. 0.036 W / (M K) noise absorption. 23 dB density. 45-50 kg / m3 color. White packaging. 20 pieces (10 m2)

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1000 x 500 x 40 mm Area Effective. 0.5 m2 The thickness of the heat insulating layer. 20 mm height of buses. 20 mm Pipe laying step. 50 mm Cover PS. 0.18 mm Diameter of the Applied Pipe. 16-20 mm dynamic strength. 30 MN / M3 thermal conductivity coefficient. 0.036 W / (M K) noise absorption. 23 dB density. 45-50 kg / m3 color. Gray packaging. 20 pieces (10 m2)

For thermal insulation system Dry warm floor Material: polystyrene foam 16F (PSB-C 25F) Thickness Mata: 50 mm List size: 1000 mm x 1000 mm Density: 16-20 kg / m3 Pipe styling pitch: multiple 5 cm Pipe diameter: 16 mm color. white

For thermal insulation system Water warm floor Plate size. 1200 mm x 600 mm base thickness. 22 mm Total Plate Thickness. 47 mm Plate Place. 0.72 m2 Pipes used. 16-20 mm density. 22 kg / m3 Pipe laying step. 100 mm Barley Diameter. 87 mm color. White coating. No packaging. 10 pieces. (7.2 m2)

For thermal insulation system Water warm floor material. Polystyrene Plate size (DHSHV). 1100 x 700 x 17 mm Area Efficient. 0.77 m2 Barley Height. 17 mm Pipe laying step. 50 mm diameter of the applied pipe. 14-16 mm Maximum temperature. 70 o C color. Black packaging. 20 pieces (15.4 m 2)

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1100 x 700 x 37 mm Area Efficient. 0.77 m2 The thickness of the heat insulating layer. 20 mm height of buses. 17 mm Pipe laying step. 50 mm diameter of the applied pipe. 14-16 mm Maximum temperature. 70 o Thermal Resistance. 0.5 m2k / W compressive strength at 10% of linear deformation. 0.08 MPa water absorption in volume 30 24 hours. no more than 3% noise absorption. 28 dB color. Black packaging. 13 pieces (10.01 m 2)

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1100 x 700 x 47 mm Area efficient. 0.77 m2 The thickness of the heat insulating layer. 30 mm Barley Height. 17 mm Pipe laying step. 50 mm diameter of the applied pipe. 14-16 mm Maximum temperature. 70 o Thermal Resistance. 0.75 m2k / W compressive strength at 10% of linear deformation. 0.08 MPa water absorption in volume 30 24 hours. no more than 3% noise absorption. 28 dB color. Black packaging. 10 pieces (7.7 m 2)

See also  Split system does not cool the causes of the air conditioner

Multifolga for heat insulation of a warm floor material. Foil foamed polyethylene length. 30 m width. 1 m thickness. 3 mm Total area. 30 m 2

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1200 x 600 x 43 mm Area Efficient. 0.72 m2 The thickness of the heat insulating layer. 22 mm height of buses. 21 mm Pipe laying step. 50 mm diameter of the applied pipe. 16-20 mm dynamic strength. 30 MN / M3 thermal conductivity coefficient. 0.0336 W / (M K) noise absorption. 23 dB density. 40 kg / m3 color. White packaging. 16 pieces (11.52 m2)

For thermal insulation system Water warm floor Plate size. 1200 mm x 600 mm base thickness. 22 mm Total Plate Thickness. 45 mm Plate Area. 0.72 m2 Pipes used. 16-17 mm density. 22 kg / m3 Pipe laying step. 100 mm Barley Diameter. 87 mm Coating. PS film Packaging. 14 pieces. (10.08 m2)

For thermal insulation system Water warm floor material. Foamed Polystyrene Plate Size (DHSHV). 1200 x 600 x 71 mm Square effective. 0.72 m2 The thickness of the heat insulating layer. 50 mm bobbing height. 21 mm Pipe laying step. 50 mm diameter of the applied pipe. 16-20 mm dynamic strength. 30 MN / M3 thermal conductivity coefficient. 0.0336 W / (M K) noise absorption. 23 dB density. 40 kg / m3 color. White packaging. 8 pieces (5.76 m2)

For thermal insulation system Water warm floor material. Foil polystyrene roll Roll dimensions: 2000 x 1000 x 25 mm thermal conductivity coefficient. 0.037 W / (m ° C) noise absorption. 23 dB dynamic strength. 30 (MN / M3)

Features of mats for warm water floors by type

Characteristics and efficacy of stacked elements directly depend on the material that was used for their manufacture. Before you give preference to a specific option, you should get acquainted with the main. This will allow you to choose the optimal solution for specific operating conditions.

Rolled materials equipped with a foil layer: Low Ceiling Premises Option

For the manufacture of rolled material used foam 2-10 mm thick. On one side of such a heat insulator, a layer of aluminum foil or polymer film is applied. Their main purpose is the reflection of the heat flux in the direction of the tile or the other type of floor covering, as well as the propagation of heat along the floor surface.

Rolled materials to mats are sufficiently conditionally. Their thermal insulation properties are low, which significantly narrows the possible area of ​​use. The choice in favor of the foil insulation is made only when using water floors as an additional heating source, while the floor surface is insulated.

“Refuse to use foil roll materials when performing installation work on the first floor or indoors under which a unheated basement is located”.

When laying pipes on a foil surface, some difficulties arise. For reliable fixation uses clamps, reinforcing mesh, brackets and other elements. To ensure sufficient tightness of the joints of the laid flashes, the canvas are punished with special foil scotch.

Polystyrene foam plates

Often, flat mats made of polystyrene foams are used for warm water floors. The density of the material used for their manufacture must be greater than 35 kg / m³. Less dense expanded polystyrene can not cope with the task, as it will not be able to withstand the applied load.

The price of polystyrene foam mats for a warm floor makes them a very popular option due to its availability. To improve the thermal insulation characteristics of the formed layer from above, often laid rolled foil insulation.

Foil Mats for Warm Waters with film coating

This specification is a heater, on the surface of which the foil and film layer is applied. Manufacturers offer heat insulator in shape:

  • plates with a locking compound that is additionally sampled with waterproof tape;
  • panels, to the connection site of which the overall film coating. In the installation process, the elements simply laid out on the surface.
warm, floor, laying, mats, locks

On the surface of foil mats for warm water floor, a coordinate grid is applied in a step of either 50 or 100 mm. The presence of markup makes it easy to lay the heating circuit.

See also  How to remove the track from the iron on the blouse

Plate thickness is 2.5 cm. The width of each mat of the warm floor is 100 cm with a roll length of 5 m. In some models, the connection of the elements is carried out using a self-adhesive layer, which greatly simplifies the implementation of installation work. Fastening a water heating circuit is carried out using a bracket. In some cases, during installation, a reinforcing mesh is used, which is filling from above.

Mats for warm water floors with “bobbs”. the best solution

This type is the most convenient option. Their design was designed specifically for warm water floor. Special protruding elements greatly simplify water circuit stacking.

Mats for warm water floors with bugs are made of polystyrene foam, the density of which is at least 40 kg / m³. This is enough so that the material can withstand a significant load. The formation of the protruding elements is due to the use of hydroporlant stamping technology.

The shape of the bobies can be the most diverse: round, cylindrical, cubic, multifaceted and other. The distance between the elements is chosen in such a way that they can reliably fix the water circuit in the desired position. Due to this, it is possible to avoid the displacement of pipes during the installation process under the influence of the poured concrete.

25 mm bobbing heights enough for warm water floor with a pipe with a transverse size of 20 mm. Depending on the model, the thickness of the mats is 40. 50 mm. The type of coating depends on the manufacturer. Some mats do not have a protective layer, which does not affect their operational characteristics. Some are produced with an upper film coating or tightened by waterproofing film.

For the convenience of installing, such mats are supplied with special lock connections. Due to their presence, a quick connection of the elements and the formation of a hermetic layer used as a base for a tie device of any kind.

Attention! Mats for warm water floors of this species reduce noise level up to 25 dB.

Recommendations for choosing

Polystyrene foam mats Knauf Therm warm floor

There are mattes for a warm floor with clamps inexpensively, but still it is worth considering several recommendations so that you do not have to purchase low-quality products and disappoin:

  • If you have a choice of which design, buy, definitely buy plates with a foil and laminating surface. You will not worry about waterproofing, and the heating system will work more efficiently.
  • Pay attention to the parameters: pipe diameter and laying step on mate.
  • How thick will the insulating part, depends on the level of floral levels. Consider the thickness of the screed and the last flooring. If the floor does not need a special insulation, then you can buy profile mats for a warm floor with minimal thickness buses and with a weak layer of thermal insulation, T.E. Only for light laying pipe loop.
  • Many producers. And in order not to make a mistake with the choice and purchase high-quality products, it is better to choose a verified seller.

Heating mats for a warm floor

In the store Tepliypol-MSK, a large selection of elements for the arrangement of warm floors. We can buy heating mats manufactured by manufacturers of Russia, Europe, Asia. For many models, a long-term 10-15-25-year warranty is given. with the right installation, they will definitely serve until 40-60 years. Russian to Wipania “Teplovuks” guarantees 50-year service life, and THERMO. lifelong. It speaks of high quality, reliability, efficiency of their cable products intended for styling under porcelain tile or tile.

See also  Is it possible to put a warm borsch in the refrigerator

Mates differ in length (standard web width 0.5 m), cross section and conductive ability (power) cable. It depends on the heating area (1-15 kV. meters) and product price. On all models there are passports, certificates. Manufacturers provide detailed instructions for using their products.

Heating mats for a warm floor

In the store Tepliypol-MSK, a large selection of elements for the arrangement of warm floors. We can buy heating mats manufactured by manufacturers of Russia, Europe, Asia. For many models, a long-term 10-15-25-year warranty is given. with the right installation, they will definitely serve until 40-60 years. Russian to Wipania “Teplovuks” guarantees 50-year service life, and THERMO. lifelong. It speaks of high quality, reliability, efficiency of their cable products intended for styling under porcelain tile or tile.

Mates differ in length (standard web width 0.5 m), cross section and conductive ability (power) cable. It depends on the heating area (1-15 kV. meters) and product price. On all models there are passports, certificates. Manufacturers provide detailed instructions for using their products.

warm, floor, laying, mats, locks

The main advantages of polystyrene matte

Mates are a new word in the market of insulating materials for a warm floor, which are high quality and manufactured on European technologies. Plates have a number of pluses:

  • do not change the form during long-term operation;
  • have comfortable locks, which makes them easy to lay;
  • have marking on themselves to facilitate the installation of pipes or heating cable of the warm floor;
  • have excellent sound and thermal insulation;
  • no moisture is gaining and do not rot;
  • Not harmful to humans, during heating do not emit hazardous substances;
  • withstand large temperature differences (from.180 to 180 ° C);
  • have a long service life.

It is necessary to know that the polystyrene foam is the material capable of burning and the process allocates harmful toxic smoke. To prevent such properties, manufacturers add antipirens, which makes it impossible to ignite it. Such mats can be bought with a special marking in the form of the letter “C”.

Features of the selection and installation

The modern market offers various types of thermal insulation mats: polystyrene foam, foil, basalt, from foamed polyethylene and other materials. The greatest density and warmth are foils, they should be selected for heating systems, where the warm floor is the main heating.

The substrate from thermal insulation plates is going simple enough, by type of designer. Plates are conveniently measured and fitted, it is possible to chop them even with the help of a conventional knife. During the stacking, if necessary, you can change the length of the pipes and the contour of the plates themselves. For fixation so that there were no displacements during operation, the intercutric jokes are sampled by a specialized construction scotch.

In addition to the heap systems, the products described can be used for the heat insulation of the walls.

Briefly about the main thing

Insulation under the warm water floor should be chosen very carefully. He should not miss the cold and allow warm air to go out. The task of the substrate under water floor. the uniform distribution of heat around the room. An excellent substrate option will be mats for a warm floor. They are different species, respectively and characteristics they are unequal.

It is important to pick up mats under the features of the room. Thin materials are not suitable for basement rooms: can be used only as reinforced heating. Polystyrene foam with “bobbs” is best fit, because it is easiest to place a warm floor heating system. The main thing is to accommodately approach the choice and installation of the material, then the warm floor will last long years and will be able to warm the house.