Washing machine flows below

When the hostess acquires a washing machine. Often it expects what. Washing machine will work for a long time. Rejoicing clean clothing. Do not break. But it is possible an unexpected breakdown. Breakdowns are very different. But visually usually apparatus leaks from the bottom. Tell me. WHY DOES FROM THE WASHING MACHINE. and what to do in case of such trouble. It should be understood. that no one is insured from breakdowns in the washing machine. Therefore, it can happen to the most leaning and neat owner. If you purchased expensive technique. it does not mean. that it is not susceptible to breakdowns. This happens with high-quality LG washing machines. To react to the emerged breakage. and then correctly eliminate. You should carefully examine the information. given in this article. In it will find an explanation of the causes of leaks. The emergence of problems. We will tell. How to eliminate breakdown. how to carry out the prevention of equipment. what to do. If flowing at an unexpected time.

Causes of leaks

The main reasons why the washing machine takes place from below, here are the main of them:

  • improper operation of washing machinery;
  • use when washing low-quality chemicals;
  • factory marriage in the manufacture of parts or elements;
  • Fitting details or element.

When they completely devastated the device, then it should be understood where the cause of the leaks, which there was a breakdown. Make diagnostics better master. Consider what causes are more and how to determine their occurrence if the washing machine is flowing.

Bulk or drain hose

Washing machine. a device that is constantly working with liquid substances, there are hoses in it. Determine the cut or crack on the hoses is easy if they proceed, and you can do it even in a non-working machine. You can wrap the hose toilet paper, where it worsens, there is damage, led to the leaks. If it turned out that leak arose on the place of the joint of the hose and the washing machine housing, then dismantle from the case and replace the gasket. If it turned out that leak arose on the hose itself, then it is necessary to replace completely, the repair will be either substantial, or will save from the leaks for a while.

Dispenser

If the washing machine flowed when it turns on, after the water is supplied, it may mean that the washing dispenser broke down. This may occur when using a poor-quality chemical, poor water, or when clogged with powder or due to a powerful water pressure. Also in the tray can get a foreign object or he can simply score powder.

Pipe branch

The nozzle can be broken after 12 months from the beginning of the operation of the washing machine, the LG machines are less likely. This breakdown is connected with unscrupulous manufacturers who are trying to save on everything.

If the main flow occurs during the fence of water, then the problem is probably with the nozzle. To make sure that it is true, you will have to remove the top cover from the machine.

It happens that it starts to flow a drain pipe going to the drain pump from the tank. You can make sure that you can, tilting the washing machine and looked at the bottom. Can start leaking and water bay nozzle into the tank. To check this, you will have to promote the front wall and inspect the connection location. To eliminate the problem, you will need moisture-resistant glue, which you need to make a pretty lubricate the location of the connections.

Water bay nozzle in tank leak through nozzles

Door cuff

If water flows from the hatch. Where clothes are loaded. means. The sealing cuff was damaged. It can be repaired or replaced. For high-quality repair, call the masters. So that such a breakdown does not arise. Carefully check the clothes s. before. how to load it in a washing machine. In s often remain small items. which pointed edges can harm the cuff and lead to leakage.

Minor cuts in the cuff can be eliminated. Applying rubber pay and waterproof glue. With a lot of damage, a full cuff replacement will be required.

Tank problems may arise. If you often erase not only clothes. But shoes. Belts. clothing with metal elements. which gradually damage the surface of the tank and lead to breakage. If a crack arises in the tank. then it will have to change. And it will require funds and much time. You can try to stick the crack. But most often it does not end.

The tank consists of several parts. To connect which brackets or bolts are used. With gasket. connecting them. Over time, the gasket is damaged and then leak occurs. After that it may be necessary to replace the gasket.

Stuffing box

If flow occurs during annealing, it means one thing is damaged, immediate repair is needed. It is important to remember that over time the gland is worn out, which immediately leads to a leakage during spinning. To check in what condition the gland is, you need to inspect the tank. By the way, during the inspection there may be a need for a change not only the gland, but also bearings.

Troubleshooting, repair

If you decide to do without the help of the wizard and eliminate the malfunctions yourself, then you should be careful, with incorrect actions, you can make it only worse. Warranty service does not apply if they were engaged in repair at home independently.

If it started at the bottom of the washing machine, then the following actions should be performed in time:

  • Turn off the equipment from the power. Turn off the machine from the outlet should be carefully, and not allowing water to contact with you. This will prevent possible troubles, first of all shock. If you cannot switch off without contact with water, you should turn off the entire electricity system in the distribution panel;
  • As soon as the flow occurred, overcoat the water supply;
  • How the washing machine is turned off, open the door, pull all the clothes from the washing machine. With the finished washing, you should drain the remaining water from the machine through the drain filter, which is lower in the front of the washing machine, at least LG.

The main types of breakdowns and their repair

Visual inspection of the hull is not much helpful. First of all, the hoses connected to the unit are studying, and then its internal mechanisms. For the latter, you need to push the washing machine to facilitate access, tilt it, completely remove the rear or side wall. Ways access to mechanical content The machine depends on the design of the model.

Drain or bay hose

It often happens that the leakage is associated with incorrectly connected or damaged during operation of the fluid / drain system hoses. They just disconnect enough.

It is worth considering a very common case when the drain hose is initially not connected to the discharge sewage. If the unit is in an uncomfortable place or far from the knot, it is unreliable attached to the side of the sink, bathroom or even toilet. This happens when the owners are carried out by the owners of themselves, and do not turn to those skilled in the art.

With this connection, the flow becomes hardly a regular problem due to a simple human factor. forgetfulness. Taking a bath or using other plumbing amenities, the hose is removed, and then they do not fix it back. As a result, the nearest wash will turn the flood.

water, flows, drain, hose

If there is just an unconnected to sewer the drain hose, you need to pay attention to its position. Such exploitation is a violation, but not as critical so that it takes someone very much.

When checking connected properly drain or bulk hoses, you must carefully examine and try. Corrugation is easily deformed and can crack on bend. It is she who becomes the most common cause of flows.

Eliminate this problem is easy.Tubes are easy to replace by purchasing an exact copy. Get better original, which will serve longer, and not fragile fakes. The problem with the drain hose is manifested by the presence of a constant leaks during the drain of water when washing or in prescrat mode.

water, flows, drain, hose

Drain filter

If the washing machine proceeds exactly below, in the area of ​​the drain filter, most likely it is just poorly twisted. This happens if it was cleaned or removed excess water, and then unfinished.

It is necessary to remove the filter, and then close it to the end. It should be done, not applying strength, otherwise there is a risk of breaking the thread, and for its repair it will definitely need to call a specialist.

There is also a possibility that the filter is clogged due to the fact that there is no regular preventive cleaning. In this case, it must be reached, eliminate all the litter, wash and insert back.

High Efficiency. How to avoid spilling or continuous flow of water in washer

Powder compartment

When the machine begins to work, at the beginning of the washing cycle or in rinse mode, water enters the hopper for detergents. If the cuvette is clogged, the soapy solution will cut out, and not to the lover, thereby creating a small puddle on the floor.

You need to take care of the dispenser and periodically clean it to avoid blockage. In case of obstruction of the flow of fluid flow, the cuvette is completely removed and carefully clean. Besides washing powder, it remains raid from hard water, and sometimes mold.

See also  What to do if water flows from the air conditioner

Pipes

The resulting pipe of the inlet valve can also cause leaks. To get it, you will have to dismantle the top of the case and replace the broken item. If the problem lies in the nozzle for a water set, you can not replace it completely.

It is enough to disconnect it, handle the place of the gap and again glue with a rubber-based glue. You can run test washing after all applied substances are completely dried.

Calculate nozzles because on such details, manufacturers of inexpensive models of household appliances usually save. As a rule, they begin to leak after 1-2 years of intensive operation of the aggregate.

Rubber cuff

The reason that the washing machine is flowing from below, there may be a prudent lingerie loading hatch. When a crack or puncture is in front, water flows through the door. If the inside was worn out, then. from under the bottom.

This element is damaged mainly due to improper operation of the washer:

Do not do without fully replacing the details. Need to dismantle the door and get the rubber seal. Damage damage can be sealed if it is small. But even in this case, the fixed item will not last long. It is better to immediately buy and install a new.

Drain pump

If he came into disrepair due to age or because of mechanical damage, there will be a leak place. If necessary, you can check for integrity by reloading it completely. Will not work, you need to change to a new.

It is interesting: in commercials of auxiliary tools for the care of the washing machine often show that due to the broken heating tan, the unit breaks down and immediately gives to flow. In fact, so that it really happens, he should explode, which happens very rarely and is accompanied by a strong noise. The only sign of the blown tan. washing with cold water at a high temperature mounted.

Being hardly the most durable element, the tank is not necessary to flow. Practice shows the opposite. The reason for its malfunction can be extraneous sharp objects provoked by a crack.

Lovers wash shoes, belts, upper clothes and bone bones, without placing the product in a special bag, will face such a breakdown. It also applies to forgetting to check the s before placing clothes in the drum.

The problem is very global, and the only option to solve it without a complete replacement of technology. a challenge of a specialist who dismantles the old tank and will install a new.

Deformation of the gland

If leak appears when ticking up clothes, you should examine the presence of a malfunction. A large amount of water in the tank with a strong vibration of the unit causes excess fluid to pour out. If necessary, you will have to replace it with a new. Simultaneously with this procedure, it is recommended to immediately update and bearings.

On any malfunction of the washing machine, especially in the process of its work, it is necessary to react immediately to not increase the scale of disaster by flooding and the final failure of the unit. Most problems with it are solved by replacing parts at home. If there is a flow, and its source could not be discovered independently, you can always contact the specialists who will definitely find the breakdown and repair in the shortest possible time.

The main types of breakdowns and their repair

Visual inspection of the hull is not much helpful. First of all, the hoses connected to the unit are studying, and then its internal mechanisms. For the latter, you need to push the washing machine to facilitate access, tilt it, completely remove the rear or side wall. Ways access to mechanical content The machine depends on the design of the model.

Drain or bay hose

It often happens that the leakage is associated with incorrectly connected or damaged during operation of the fluid / drain system hoses. They just disconnect enough.

It is worth considering a very common case when the drain hose is initially not connected to the discharge sewage. If the unit is in an uncomfortable place or far from the knot, it is unreliable attached to the side of the sink, bathroom or even toilet. This happens when the owners are carried out by the owners of themselves, and do not turn to those skilled in the art.

With this connection, the flow becomes hardly a regular problem due to a simple human factor. forgetfulness. Taking a bath or using other plumbing amenities, the hose is removed, and then they do not fix it back. As a result, the nearest wash will turn the flood.

If there is just an unconnected to sewer the drain hose, you need to pay attention to its position. Such exploitation is a violation, but not as critical so that it takes someone very much.

When checking connected properly drain or bulk hoses, you must carefully examine and try. Corrugation is easily deformed and can crack on bend. It is she who becomes the most common cause of flows.

Eliminate this problem is easy.Tubes are easy to replace by purchasing an exact copy. Get better original, which will serve longer, and not fragile fakes. The problem with the drain hose is manifested by the presence of a constant leaks during the drain of water when washing or in prescrat mode.

Drain filter

If the washing machine proceeds exactly below, in the area of ​​the drain filter, most likely it is just poorly twisted. This happens if it was cleaned or removed excess water, and then unfinished.

It is necessary to remove the filter, and then close it to the end. It should be done, not applying strength, otherwise there is a risk of breaking the thread, and for its repair it will definitely need to call a specialist.

There is also a possibility that the filter is clogged due to the fact that there is no regular preventive cleaning. In this case, it must be reached, eliminate all the litter, wash and insert back.

Powder compartment

When the machine begins to work, at the beginning of the washing cycle or in rinse mode, water enters the hopper for detergents. If the cuvette is clogged, the soapy solution will cut out, and not to the lover, thereby creating a small puddle on the floor.

You need to take care of the dispenser and periodically clean it to avoid blockage. In case of obstruction of the flow of fluid flow, the cuvette is completely removed and carefully clean. Besides washing powder, it remains raid from hard water, and sometimes mold.

Pipes

The resulting pipe of the inlet valve can also cause leaks. To get it, you will have to dismantle the top of the case and replace the broken item. If the problem lies in the nozzle for a water set, you can not replace it completely.

It is enough to disconnect it, handle the place of the gap and again glue with a rubber-based glue. You can run test washing after all applied substances are completely dried.

Calculate nozzles because on such details, manufacturers of inexpensive models of household appliances usually save. As a rule, they begin to leak after 1-2 years of intensive operation of the aggregate.

Rubber cuff

The reason that the washing machine is flowing from below, there may be a prudent lingerie loading hatch. When a crack or puncture is in front, water flows through the door. If the inside was worn out, then. from under the bottom.

This element is damaged mainly due to improper operation of the washer:

Do not do without fully replacing the details. Need to dismantle the door and get the rubber seal. Damage damage can be sealed if it is small. But even in this case, the fixed item will not last long. It is better to immediately buy and install a new.

Drain pump

If he came into disrepair due to age or because of mechanical damage, there will be a leak place. If necessary, you can check for integrity by reloading it completely. Will not work, you need to change to a new.

It is interesting: in commercials of auxiliary tools for the care of the washing machine often show that due to the broken heating tan, the unit breaks down and immediately gives to flow. In fact, so that it really happens, he should explode, which happens very rarely and is accompanied by a strong noise. The only sign of the blown tan. washing with cold water at a high temperature mounted.

Being hardly the most durable element, the tank is not necessary to flow. Practice shows the opposite. The reason for its malfunction can be extraneous sharp objects provoked by a crack.

Lovers wash shoes, belts, upper clothes and bone bones, without placing the product in a special bag, will face such a breakdown. It also applies to forgetting to check the s before placing clothes in the drum.

The problem is very global, and the only option to solve it without a complete replacement of technology. a challenge of a specialist who dismantles the old tank and will install a new.

Deformation of the gland

If leak appears when ticking up clothes, you should examine the presence of a malfunction. A large amount of water in the tank with a strong vibration of the unit causes excess fluid to pour out. If necessary, you will have to replace it with a new. Simultaneously with this procedure, it is recommended to immediately update and bearings.

On any malfunction of the washing machine, especially in the process of its work, it is necessary to react immediately to not increase the scale of disaster by flooding and the final failure of the unit. Most problems with it are solved by replacing parts at home. If there is a flow, and its source could not be discovered independently, you can always contact the specialists who will definitely find the breakdown and repair in the shortest possible time.

The most frequent reasons for leaks of washing machines

If your Washing Machine LG, Samsung, Indesit or Ariston and DR. When washing, first gave a failure of this type, the reasons may be different, for example:

  • Breakdown of the pump, which is responsible for the recovery of the used liquid from the machine;
  • Violation of the integrity of the tank (the formation of holes in it as a result of mechanical damage);
  • Damaged sleeve for water supply or sleeve for liquid drive;
  • A rubber seal has been deformed, which prevents leaks from under the door;
  • Paul a channel (nozzle) in the form of a curved corrugated tube, which connects the drum with pump;
  • The integrity of the channels is broken through which the fluid passes from the intake sash to the powder acceptor;
  • Out of order. This is an element ensuring the rotation of the drum;
  • Powder cleared.

Bulk or drain hose

When you found that the washing machine proceeds, then the first thing to inspect it visually. Perhaps the cause of leaks in deformation or breakage of sleeves for fence and removal of water. In addition, when the set of water or drave, sometimes leaks from the jacks between the hose and the machine appears.

See also  Is it possible to wash the grater in the dishwasher

This is not a serious breakdown, but it can be fixed with a simple replacement of the gum.

If you saw that the hose itself (for removal) is spooled, then glue it with a special tool and rubber walker. All this can be bought in the store plumbing. If there is such an opportunity, then just replace it. The sleeve is better to change to the fence completely, because the head in it is always strong, because of what the load on this item is too high.

Where does water under the machine? What to do when an emergency is detected?

A washing machine flows from below the reasons for the washing machine. One of the main items of household appliances, designed to create comfort in your farm. However, due to active operation, as well as as a result of poor-quality assembly, there are damage. One of the most unpleasant breakdowns, it is flowing from your car. And this problem can not only slow the wash in your home, but also deliver problems in case of a flood on the lower floors of the neighbors, and that even more dangerous is the electric shock. However, if you saw the puddle on the floor, you should not immediately despair, perhaps some of the problems you can solve yourself.

Finding out the causes of leakage and their elimination

When leakage is detected from below, you need to turn off the power supply, block the water supply and turn the car. Continuing inspection We can detect the cause of the leakage. We look at the presence of outers on the details and condition of the clamps, on the connection of hoses and pipes.

The washing machine is flowing from below

Flusted and drain hose

Each AFM has hoses: feed and plum. The feed hose is at the top of the rear and connects the feed valve with the water supply trunk. It has two threaded compounds in the form of large plastic nuts spinning by hand. Here it is necessary to pay attention to the state of threaded connections. We advise you to check the condition of the pads and make sure that the plastic nuts are properly tightening. You need to delay manually, it is better to put on a glove or throw a dry rag on the fitting.

Seeing the water under the washing machine immediately disconnect it from the electricity network to ensure its own security from shock.

The plum hose is more often located at the bottom and connects the pump with the sewer.

It is worth noting that the tightness of the hose connection with pumps provide rubber rings, or clamps. It is possible that it flows from there.

Inlet valve cuff failure

One of the frequent causes of the flow is a disruption of the intake valve cuff. Independently not repaired. Replacement required.

  • The machine is turned off, and water continues to gain.
  • If the level in the car is already complete, and the flow of water in the tray continues
  • Flowing water during rinsing or during washing (if a double-chamber valve, one washing camera and one on a rinse) failure of one of the valve sections

Checking the dispenser for laying powder

One of the reasons for the flow underlying, so to speak, on the surface, is to flow through the powder tray. Carefully follow the amount of detergent of the dispenser. If the powder is exceeded, it can be shuffled in the dispenser and splashing the liquid to the outside. Further look at the purity of tray compartments, on the quality and state of the means you use. Often with a long operation, the cavity of the compartments are clogged by the residues of the powder and thereby block the passage into the dispenser to pass water into the tank. Thus, the water simply has nowhere to leave and it flows out. Another cause of moisture penetration from the tray can be a special compartment for air conditioning. If visible solid sediments appear on his host part, then in this case, the flow may be from the container.

Attention! After work, do not be lazy to check the cuvettes of the dispenser for the subject of non-dissolved powder. After all, in the future it can cause the way

From vibration and shaking can fly or crap connecting powder with a tank. To calculate this malfunction you will need to remove the rear wall or the top panel.

Do not forget that timely elimination of the cause of water flowing is not only your problems, but also trouble for your neighbors from the lower floors.

Checking the integrity of the cuff loading hatch

Determine the flow through the connective gasket of the tank cover is not difficult. The flow will be seen immediately after full filling of the drum and the start of the washing cycle. Carefully check the seal. If you get into the tank in the time of the stiffer processes of foreign objects, there may be damage to the cuffs, it can also happen when the door is inactive. If the gap is insignificant, you can use metallized tape or special waterproof glue. If you have more serious damage, you need to disconnect the seal from the case and take the hole using a conventional repair kit for the repair of tires, cycling chambers or rubber boats. Any of them will quite suit and cope with the problem if you do everything according to the instructions. If the gap is not found, it sometimes happens to be cleaned and wipe the seal and the door from the inside.

Checking the drain filter.

If you have discovered a leakage at the bottom of the front of your typewriter, that is, it makes sense to check the status of a drain filter serving to filter the drain and protecting the drainage pump from damage.

The filter, as a rule, is located in front and at the bottom of the washing machine, closed with a special lid, which easily opens. In order to unscrew the filter, you need to prepare for the fact that the residues of the liquid will flow out of the cavity. After dismantling the filter, it is necessary to clean its cavity from the accumulated garbage, as well as check the stream of thread and gasket. If after cleaning still continues to leak, and there is no spare gasket at hand, you can use the winding. As a winding, we use a fum-tape or you can cut the plastic bag cut long strip.

Washing machine is leaking from below: eliminate breakdowns

Eliminate malfunctions can be independently without resorting to the help of the master. But in order to repair correctly, it is worth reading the rules for its holding in each case. This will restore the functionality of the machine and save the family budget.

water, flows, drain, hose

Fault drain filter

Frequent cause of leaks is a plum filter block.

It is necessary to grasp this element in stages:

  • Open hatch, over the filter or remove the flash panel, located at the bottom of the case.
  • Put a rag on the floor, unscrew the fastener. When all the liquid falls out, completely unscrew the filter.
  • Clear items from dirt and foreign objects. Then clean the surface from the plaque using the abrasive side of the sponge. Solve under running water.
  • Check for dirt plum pump. To do this, shine a flashlight into a hole and remove trash from the pump.
  • Check the rotation of the impeller so that there is no interference.
  • Put the filter into place and spin the plug.

At the end of the repair, you need to turn on the machine and check for health. How to correct the plum filter, indicated in the instructions of the machine, but when doubt it is worth looking into the instruction manual.

Flow from water supply hose

Initially, it is worth checking the threaded connection to its weakening. Then you should check the location of the hose relative to its connection. It should have a uniform pressure on the gasket, and this can be achieved only at a perpendicular direction.

In case of damage to the part of the sleeve, it is necessary to fully replace the hose, t. to. no guarantee that glue can eliminate the crack.

The sealing cuffs on the door

To eliminate glowing cuffs, you need to put a patch. This can be done independently or call a specialist.

The procedure includes the following steps:

  • Obtain fixing clamps, separate the casing cuff.
  • Cut a patch of suitable size so that its edges overlap the damage limits by 10-15 mm.
  • Dry and carefully degrease the bonding places of both surfaces.
  • Apply adhesive uniform layer on the outer side of the rubber seal.
  • After drying, install the cuff into place.

Is it worth repairing at all?

Many users think about the need to perform repair when hears the price that masters from the service center declare. Unfortunately, the original spare parts are very expensive, and services. expensive. And if in the regions repair the washing machine has some meaning, then the price of repair can reach 60% of the value of the machine itself. Naturally, repairing something in such a situation does not make sense. If your car younger than 3 years. then repair is reasonable if older. then such an idea will not be the best solution, since the new washing machine will be much more economical than the old and for several years of operation will save a rather round sum. Also, do not forget that the vehicle breakdown will not necessarily be the last, but most likely the first bell, followed by more serious problems.

As a reasonable alternative to repair of outdated equipment, we recommend considering the purchase of a new washing machine from the famous AEG brand. The company “AEG” has been developing and manufacturing high-quality household appliances, which is one of the European market leaders in the premium segment. The washing machine will not just perform its tasks, but will save water and electricity, which is very pleasant with constantly growing for utilities. In addition to saving, the car will help you directly participate in the preservation of natural resources and environmental care.

In the catalog of our corporate store you can find stylish detached and embedded devices. Washing machines with frontal and vertical loading, which are perfect for installation in small rooms. The user is available cars with a drum volume designed to load from 6 to 10 kg of linen, which will satisfy the needs of most families. In order for the underwear to be dried faster, you can purchase a model at a press speed up to 1600 revolutions per minute or a unique hybrid device with a drying function that will prepare things to ironing and laying in a closet.

See also  How to clean the dried powder in a washing machine

To control the washing machines AEG uses advanced electronics with a plurality of sensors, which controls every minute washing and allows you to perform as much as possible and safe. Many models are equipped with Fuzzy Logic technology, an imbalance control system and a unique leakage protection with AQUA Control sensor.

A variety of varied programs that may vary by tissue type, washing and temperature cycles can be available. If desired, it can add soaking, pre-washing or additional rinse. Programs can be performed automatically, but if desired, the owner can adjust the spin speed and the washing temperature. Many models are equipped with unique inverter sensors with permanent magnets that consume less electricity and at the same time have a reduced noise level.

Why water flows?

Having found water leakage from under the washing machine, you must instantly disable the device from the network. Since household appliances have a specific service life, some details can break from time to time. Breakdown even the smallest elements can lead to the fact that during washing the car will start. We will analyze the most frequent reasons, because of which water flows under the machine.

Flows water supply hose

Most often this happens when it is connected to a drain pump or pressure on the back side. If the washing machine is tightly adjacent to the wall, the hose may rub on it, which leads to its damage. There is a chance that the gasket burst from old age, and therefore the machine leaks. Or hose is just blocked by mud with clothes. Tips that will help prevent the problem:

  • Washing machine to install so that the hose is not too much pressed against the wall.
  • In order not to clog the drain filter, before washing, you should always empty clothes s.

Fault dispenser

Cause of breakage can be held in a container for household chemicals.

Under the influence of detergents (for example, chlorine lime), the powder tray is damaged. Over time and under the influence of detergents, the dispenser cries or splits. The leak will be noticeable at the time of water consumption through the tray. If the box and / or the compartment is damaged, you need to replace them. To prevent the appearance of such a problem, the dispenser periodically needs to wash under hot running water. There are often the remnants of liquid and hardened pieces of powder.

Rolled up cuff

Mechanical damage can lead to the rupture of this rubber element, as a result of which the door leakage and water leak occurs. The damaged cuff must be replaced with a new. And in order to prevent repeated breakdown, the seal should be wiped after each washing from water residues. It will prevent waterproof and unpleasant odors.

Bad pipes

These details of the machine have a property often breaking. The problem can be encountered in the first year of operation of the device. If the leak appears only at the moment when the machine takes water, most likely, the case is in a faulty nozzle located between the filler valve and the powder bunker. To check its condition, you need to remove the top cover from the machine. Can also give a failure and a nozzle located between Pompe and Bak. You can check its integrity when tilting the device.

Crashing drain filter

Systematic filter care is the prevention of breakdowns of the entire device.

Before calling a specialist, it is worth checking if the filter is not clogged. This item must be cleaned regularly, otherwise the accumulated sediment scores the filter, and water begins to pour out the outward devices. Just unscrew the plug at the bottom of the washing machine and ready. If, despite regular cleaning, the filter is constantly clogged, the machine is the machine to all.

Flows the drain pump or tank

If during washing from the washing machine, water flows, probably the case in a pump malfunction. Most often damage to ring gaskets in the pump. They should be replaced immediately. Another reason may be damage to the connecting hose between the tank and the pump. It is possible that the rupture occurred as a result of aging rubber or weakening the clamp. You can not cut off the damaged part of the hose and pull it to get the pump. This will lead to tension and break tube. Single way out. replacement.

The main types of breakdowns and their repair

Visual inspection of the hull is not much helpful. First of all, the hoses connected to the unit are studying, and then its internal mechanisms. For the latter, you need to push the washing machine to facilitate access, tilt it, completely remove the rear or side wall. Ways access to mechanical content The machine depends on the design of the model.

Drain or bay hose

It often happens that the leakage is associated with incorrectly connected or damaged during operation of the fluid / drain system hoses. They just disconnect enough.

It is worth considering a very common case when the drain hose is initially not connected to the discharge sewage. If the unit is in an uncomfortable place or far from the knot, it is unreliable attached to the side of the sink, bathroom or even toilet. This happens when the owners are carried out by the owners of themselves, and do not turn to those skilled in the art.

With this connection, the flow becomes hardly a regular problem due to a simple human factor. forgetfulness. Taking a bath or using other plumbing amenities, the hose is removed, and then they do not fix it back. As a result, the nearest wash will turn the flood.

If there is just an unconnected to sewer the drain hose, you need to pay attention to its position. Such exploitation is a violation, but not as critical so that it takes someone very much.

When checking connected properly drain or bulk hoses, you must carefully examine and try. Corrugation is easily deformed and can crack on bend. It is she who becomes the most common cause of flows.

Eliminate this problem is easy.Tubes are easy to replace by purchasing an exact copy. Get better original, which will serve longer, and not fragile fakes. The problem with the drain hose is manifested by the presence of a constant leaks during the drain of water when washing or in prescrat mode.

Drain filter

If the washing machine proceeds exactly below, in the area of ​​the drain filter, most likely it is just poorly twisted. This happens if it was cleaned or removed excess water, and then unfinished.

It is necessary to remove the filter, and then close it to the end. It should be done, not applying strength, otherwise there is a risk of breaking the thread, and for its repair it will definitely need to call a specialist.

There is also a possibility that the filter is clogged due to the fact that there is no regular preventive cleaning. In this case, it must be reached, eliminate all the litter, wash and insert back.

Powder compartment

When the machine begins to work, at the beginning of the washing cycle or in rinse mode, water enters the hopper for detergents. If the cuvette is clogged, the soapy solution will cut out, and not to the lover, thereby creating a small puddle on the floor.

You need to take care of the dispenser and periodically clean it to avoid blockage. In case of obstruction of the flow of fluid flow, the cuvette is completely removed and carefully clean. Besides washing powder, it remains raid from hard water, and sometimes mold.

Pipes

The resulting pipe of the inlet valve can also cause leaks. To get it, you will have to dismantle the top of the case and replace the broken item. If the problem lies in the nozzle for a water set, you can not replace it completely.

It is enough to disconnect it, handle the place of the gap and again glue with a rubber-based glue. You can run test washing after all applied substances are completely dried.

Calculate nozzles because on such details, manufacturers of inexpensive models of household appliances usually save. As a rule, they begin to leak after 1-2 years of intensive operation of the aggregate.

Rubber cuff

The reason that the washing machine is flowing from below, there may be a prudent lingerie loading hatch. When a crack or puncture is in front, water flows through the door. If the inside was worn out, then. from under the bottom.

This element is damaged mainly due to improper operation of the washer:

Do not do without fully replacing the details. Need to dismantle the door and get the rubber seal. Damage damage can be sealed if it is small. But even in this case, the fixed item will not last long. It is better to immediately buy and install a new.

Drain pump

If he came into disrepair due to age or because of mechanical damage, there will be a leak place. If necessary, you can check for integrity by reloading it completely. Will not work, you need to change to a new.

It is interesting: in commercials of auxiliary tools for the care of the washing machine often show that due to the broken heating tan, the unit breaks down and immediately gives to flow. In fact, so that it really happens, he should explode, which happens very rarely and is accompanied by a strong noise. The only sign of the blown tan. washing with cold water at a high temperature mounted.

Being hardly the most durable element, the tank is not necessary to flow. Practice shows the opposite. The reason for its malfunction can be extraneous sharp objects provoked by a crack.

Lovers wash shoes, belts, upper clothes and bone bones, without placing the product in a special bag, will face such a breakdown. It also applies to forgetting to check the s before placing clothes in the drum.

The problem is very global, and the only option to solve it without a complete replacement of technology. a challenge of a specialist who dismantles the old tank and will install a new.

Deformation of the gland

If leak appears when ticking up clothes, you should examine the presence of a malfunction. A large amount of water in the tank with a strong vibration of the unit causes excess fluid to pour out. If necessary, you will have to replace it with a new. Simultaneously with this procedure, it is recommended to immediately update and bearings.