What can be done if the washing machine knocks when spinning

Owners of washing machines are faced with the question. why is the washing machine knocking when spinning. A characteristic knock appears precisely at the moment when the machine squeezes the laundry: in the pressing mode, the drum rotates with the highest speed for all time. Even a well.functioning washing machine will have vibration and noise at this stage of washing. And when the technique fails, the sounds will intensify.

The reasons why such a defect may occur can list a lot. It tends to wear out any mechanism, and the details included in the design of washing machines are also not alien.

The human factor plays a significant role: the owner’s attitude to technology, how carefully he exploits it and takes care of it. Quite often, the causes of noise are very commonplace.

Incorrect installation

In the case of improper installation of even a new machine, the owners will quickly understand that it does not work properly. This will be especially pronounced in mode with the maximum speed of the drum.

Before you panic, it is worth checking whether the washing is installed correctly. To do this, you can take the level and determine how exactly it is worth. If there is a skew in one of the sides, it must be eliminated by moving the machine to a more even surface.

Important! Many manufacturers of washing machines have already come up with a solution to this problem: the washing machines they manufactured have the legs below, which are adjusted in height, adjusting to the irregularities of the surface.

With the help of such legs with the installation of a washing machine on an uneven surface, there will be no problem

Uneven distribution of things

If the laundry in the drum has strayed into one pile, then there is a strong deviation of the tank to the side, as a result of which it begins to beat on the case. The most susceptible to such a problem of older samples.

If the drum rattles for this reason, then you just need to interrupt the washing process, shake the linen, placing it evenly in the drum, and turn on the spin mode again.

An extraneous subject

Many forget to check the s in things designed for washing. This leads to the fact that coins, buttons, screws, bones from women’s underwear, etc. are erased along the way with clothes.

With each rotation of the drum, they turn over, creating a characteristic sound in a collision with its metal surface.

Important! Having suspected the presence of a foreign object in a drum that causes noise, it is necessary to interrupt the washing process as soon as possible and extract it.

The continuation of the washing process with a foreign object inside can cause jamming the drum, and this is much more serious than just a knock.

Possible malfunctions

If the cause of the knock was one of the above situations. the owner of the machine was lucky. After all, it is much worse when any detail is out of order-you can’t do without repair.

Damage in the washing machine, causing sound uncharacteristic for the normal mode of operation, can be as follows:

  • spring breakdown;
  • A shock absorber out of order;
  • ralved counterweight;
  • worn bearings;
  • Damage of the network filter.

Each of these cases is considered separately, since all of them require different repairs.

The spring broke

The design involves holding the drum uniformly in the machine body using a spring. If, as a result of wear, the spring bursts, then the drum shifts on one side and begins to knock on the case. The knock intensifies at high speeds.

The elimination of a malfunction is possible by replacing a bursting spring with a new.

The shock absorber failed

If a knock and creaking is heard during washing, then most likely the guilty of this is worn out shock absorbers. Over time, they lose their elasticity and stretch.

This leads to the fact that their length allows them to reach the bottom of the machine and knock on it. In this case, the replacement of shock absorbers is necessary.

Important! You need to change both shock absorbers at the same time, regardless of the fact that one of them is in good condition.

If you replace one shock absorber, then the load on them will become uneven, and the second will break in the near future.

The counterweight was ill

The counterweight in the washing machine is the load necessary for the mobile structure in the washing process remains a balanced.

If, when pressing, the machine makes the sound of rattling, then it is most likely that the attachment of the balancer is shattered. The problem is eliminated by regulating the position of the counterweight.

District of bearings

For wear of bearings, not only the noise of the drum, but also trouble in the form of brown spots on freshly worn linen is characteristic. Problems with bearings can occur in a greater extent only due to long.term operation of the equipment. The material simply wears out, which brings the part to a state of unsuitability.

Important! The seals and the service life of their service are approximately coincided with the bearings.

Starting repair, you need to change both. Since the breakdown of one indicates that they will all be out of order soon.

What new bearings and bearings with “experience” of work look like

It is very noisy. this is a breakdown or norm?

During the operation of the device, noise can sometimes even be a normal situation. Some sounds that Indesit make are not a sign of failure.

These situations include noise in the following processes:

  • water bay;
  • pump work;
  • water heating;
  • rotation of the drum during the squeezing process;
  • Tsoking transition to a new stage of the washing program.

You should begin to worry when the car began to publish not characteristic of her strange sounds suddenly. Most often they make themselves felt precisely with the active rotation of the drum and high load. If there is noise in the device, it is important to correctly determine its cause.

In some cases, this sign is not a breakdown. Each device has an extremely permissible noise value.

This indicator is indicated in the documents for the machine. This is usually from 60 dB to 72 dB. If when working, the noise level is in the limits specified by the manufacturer, this is not a failure, but corresponds to normal work.

Causes and paths of elimination

If unusual sounds are detected during indesit pressing, which are not characteristic of the normal operation of the device, the source of failure should be determined. Any reason can be any. from improper installation of the device and negligence when laying linen to serious breakdowns.

In a new and only transported washing room

If the device began to make noise after transportation, it is necessary to clarify whether transportation bolts were removed.

They are attached from the side of the posterior wall of the household appliance, and are needed in order to prevent loosening the drum during transportation. But when the car was installed in a new place, they should definitely be removed.

Noise is possible when spinning if there are such circumstances:

  • The device is installed on an uneven surface.
  • The back or side wall with intense rotation of the drum beats against the wall or closely located furniture.
  • Too slippery surface of the flooring.

Transport bolts, as well as the instructions for the washing machine, is recommended to maintain a washing room throughout the entire time.

Underload and overload

The noise at large speeds can indicate both the reload of the drum and a strong underload, when, for example, only one T.shirt was sent to the washing.

Indesit in the process cannot qualitatively distribute linen, which affects the appearance of noise. Solving the problem. control over the loading of linen.

Extraneous objects

If when squeezing the linen is heard a buzz and rattle, then there is a probability that extraneous objects from the s of clothing got into the machine by oversight. At the same time, coins, paper clips and other things can not only linger in the drum, but also get into the tank.

The danger of such a situation is possible serious damage to the tank, heating and other details. While there is a stage of washing the rotation of the drum is not as intense as pi extinguishing, so the presence of an outsider may not manifest itself in any way.

Solution of the problem. partial analysis of the washing machine from the side of the back wall. After the service hatch was open, it is necessary to pull out the heater, and through the formed hole to pull out the object that came into the drum.

It is important after extracting the subject from the tank to perform all the work in the reverse order carefully and accurately. According to statistics, objects accidentally getting inside the car are one of the most common causes of noise.

District of bearings

This problem is characteristic of Indesit washing machines, which have been operated for a long time.

In the process of operation of the device, the oil seal over time begins to lose tightness. At the same time, water enters the bearings, which eventually rust and destroy.

When ignoring this breakdown, an aggravation of the situation is possible: the outgoing ceases to be sufficient, rusty stains can be provided after washing after washing, and leaks and breakdowns of other details are possible. Solution of the issue. timely replacement of the omentum and bearings.

The work on replacing bearings is quite complicated, and in the absence of skills it is better to entrust it to professionals. How to change bearings, you can find out here.

Shock absorbers worn out

Significant vibration and strong knocking when spinning can indicate depreciation of shock absorbers. In a situation where the wear is significant, the washing machine can not only make noise, but also jump.

washing, machine, rattling, technique

Solution of the issue. replacing details. over, replacing shock absorbers is necessary with a couple, even if the signs of wear are noticeable only on one. How to change shock absorbers, this article will tell.

Passing problems

When spinning in the work of the Indesit machine, a pump is involved. Noise can talk not only about the wear of the details, but also about the hit in the pump of an outsider. Diagnosis is possible with a partial disassembly of the device.

Sometimes an extraneous object hits the impeller of the impeller, which causes extraneous sounds. If the pump is out of order, it should be replaced.

The engine broke

With a breakdown, the engine can make noise and cracking when pressing, when the load on it increases. At torque, the electric motor brushes are responsible. If they have become unusable, they need to be replaced.

Professor malfunction

The counterweight malfunction is especially noticeable when the rotation of the drum passes intensively. when spinning. If this happens, then the car is thunder and vibrates.

You can correct the situation after analyzing the conference state. If he gets sick and moved away from the mounts. he is fixed.

But in cases where the counterweight collapsed, it is replaced by a new.

Weakening of the pulley of the drum

As a result of the operation of the washing machine, the drum pulley can get out. In this case, when pressing, the pulley hangs and creates a roar. When washing, noise can also be, but not so strong. Solution of the issue: If the nut weakened, it must be pulled up.

Spinning a filter of interference

If the fastening of the filter is weakened, then the noise when the spin can proceed from the upper part of the washing machine. It is possible to verify the filter with a partial disassembly of the device. Solving the problem. tighten the fasteners.

Elimination of extraneous noise in the Indesit washing machine. in

The reasons for the malfunction and ways to solve the problem

If only things were laid in the Bosch drum without metal fittings, then the knock and other noise when spin should be alert. In this case, it is likely that there is a problem with the technique that manifested itself with intensive rotation of the drum.

If to diagnose the condition of the washing machine and individual nodes, it is necessary to open the housing, you should turn off the device from electricity and block the water supply valve.

An extraneous subject

A knock when spinning, and sometimes when washing very often indicates an extraneous object in the Bosch washing machine. It can be:

You should not use the washing machine in this state. The work cycle must be stopped, and an extraneous item must be extracted. This is due to the fact that a foreign body can lead to serious breakdowns. up to damage to the tank itself. Repair in this case will be very serious and expensive.

Sometimes a stuck outsider can be reached without disassembling the Bosch washing room. through the drum. But more often a partial disassembly of the washer and extraction of an extraneous object through the heating nest of the heater will be necessary. At the same time, it will not be superfluous to clean the drain filter. foreign objects may also remain in it.

District of bearings

The problem with bearings is a situation characteristic of washing machines that are long in work. Over time, the oil seal is destroyed, and the water begins to get to the bearings, leading to corrosion. As a result, the bearing node ceases to cope with the load, and its destruction begins.

At first, the knock accompanies only the squeeze. Later, extraneous sounds become audible even when washing and when rotating with the hand of an empty drum. This situation requires mandatory repair.

Replacing bearings. a serious repair that requires a complete disassembly of the Bosch washing machine. It is desirable to conduct it in a workshop. Details. in this article.

Emphas of shock absorbers

Over time, shock absorbers. parts that stabilize the position of the tank inside the body of the washing machine become unusable in the washing machine. If they have lost functionality, the tank with spin begins to make fluctuations in wide amplitude and hit other nodes and even about the case.

It is possible to check the condition of the shock absorbers by simply swinging the Bosch washing machine. If they are worn out, the tank will begin to make oscillatory movements and only gradually stop. Solving the problem. replacing shock absorbers in a washing machine. Such work is carried out with partial analysis of the case.

Dampers are always replaced by a couple, regardless of the degree of wear of the second shock absorber. Details. in this article.

Solving the problem with the replacement of shock absorbers. on

Counterweight

Knocking and vibration on an exalgory can be a sign of problems with a counterweight. The balancing weighting agent is installed on top of the drum and from the front panel side.

The main purpose of the use of the counterweight is to stabilize the position of the drum. With its destruction or weakening of fasteners, a knock is possible during the operation of the washing machine. This problem is especially pronounced at the spin stage when the drum movement is very intense.

The problem with the counterweight occurs quite rarely. To evaluate their condition, it is necessary to partially disassemble the case. remove the upper and front panel with Bosch. If the problem is in fasteners. they need to be pulled up. But if the counterweight is destroyed, it should be replaced.

Weakening of springs

In addition to dampers, the springs are responsible for stabilizing the position of the tank inside the Bosch washing machine, on which the tank is suspended. They have very high rigidity, and usually serve without complaints. But if for some reason they stopped fulfilling their role, they need to be replaced with new.

Not twisted transport bolts

Transport bolts are used in the process of transporting the Bosch washing machine. They are screwed from the side of the posterior wall to prevent the free stroke of the tank during transportation.

After the machine is installed in a permanent place, they need to be removed by inserting special plugs into the grooves, which are included with a washing machine.

If the transportation is not unscrewed before the start of operation by the device, the Bosch washing machine can make a knock on the exalgory and when washing. This is due to the fact that the tank is forcibly held in a certain position, which does not allow it to move as it is provided technologically. Hard fastener does not soften fluctuations in springs and shock absorbers.

If the knock arose at the first washing in a new place, you need to check if transport bolts are unscrewed. There are usually 4 of them in Bosch.

I unscrewed from the fasteners of the network filter

The interference filter serves to suppress interference created by household appliances. If the fasteners are weakened, and the device has unscrewed, it can hang inside the case on the wires and beat on the drum, publishing a knock when spinning.

Repeated reliable fastening of the network filter will help to cope with the problem. Clarify that the problem is in this detail after opening the body and obtaining access to the node.

Cracation of the drum

Too many things in the Bosch drum can form a heavy lump, which when spin will be deafly hit on the walls. This use of technology is extremely undesirable, since it creates an increased load on the nodes, including damper, bearings, axis, etc.D. The solution to the problem is to interrupt the cycle and put the linen in the drum. Part of things is better to remove.

The installation of push.ups when washing shoes can also lead to an imbalance. Bosch wasting a significant damage to the washing technique of the washing technique on the walls of the drum.

Motor mounting

A knock with spin can even make an engine. in the event that it is poorly fixed in his landing nest. When reaching the squeezer, the Bosch motor works very intensively, forcing the drum to rotate with a belt.

If the fastenings are weakened, the motor is not fixed hard. He can fight about metal and transmit uneven movement of the drive belt. The solution to the problem. open the body of the washing machine and fix the engine.

Preventive measures

In order not to face the problem of knocking when pressing the Bosch washing machine, such preventive measures should be taken into account:

  • When laying things into the drum, it should be avoided by foreign objects. keys, coins, etc.D. To do this, it is important to check all the s and strengthen all the elements of the accessories in advance.
  • Overload of the drum, especially in cases where it occurs often, is able to accelerate the wear of the elements of the washing machine, including bearings and shock absorbers.
  • The installation of the washing machine should be completed according to all the rules.
  • Transport bolts should be unscrewed immediately after transporting the washing machine to a new place.

The reasons for the noise in the washing machine and their elimination

If the washing household machine is very noisy when working on an annex, then the reason is the improper operation. An extraneous roar appears during the reloading of the drum with things.

There are a number of other breakdowns that lead to the roar and noise of technology.

Incorrect installation

Incorrect installation may be the main cause of the roar of an automatic machine. Even a small inclination provokes vibrations when rotating the drum at 800-1000 rpm. Dysbalance in combination with centrifugal force leads to very loud knocks, vibration and swinging of the body. The problem is solved by aligning the equipment horizontal using the construction level.

Does Your Washing Machine Or Dryer Dance, Vibrate & Walk. How To Make Anti-Slip Foot Pads For FREE

Important! A loud knock appears and when the machine is put on the floor with a strong deflection.

An extraneous object came

In the presence of extraneous objects in the drain pipe and the drum, a working washing machine is noisy, but when spinning these sounds are heard most clearly. Coins, metal fasteners and buttons that interfere with normal operation may be inside the device.

The problem is solved by the release of the drum from small things, cleaning the drain pipe and channels. Sometimes small items fall between the drum and the heating ground are removed with the disassembly of the case. In parallel, cleaning from garbage and scale is carried out.

Interesting to know! According to the statistics of service centers, more than 80% of appeals are associated with the entry of foreign objects into the mechanism of technology.

Not twisted transport bolts

Demolishing manufacturers pay special attention to transportation safety. During transportation, the SMA drum is fixed with special mounts that avoid loosening during movement.

You need to install equipment only after twisting the bolts. By ignorance, users forget about them. The result is a loud noise of the device at the first launch. After unpacking washing, it is important to pay attention to the following:

  • The drum is fixed with bolts from 4 sides;
  • All fasteners are subject to removal;
  • The locks should be unscrewed carefully so as not to damage the equipment housing;
  • The bolts are displayed counterclockwise.

Advice! Do not throw away the transport fasteners-it will be needed the next carriage of the automatic machine.

Damaged bearings

If the washing machine is rattling during washing and when spinning, the problem is the damage to the bearing. The failure of the element occurs due to wear of the oil seal, which prevents moisture. Leaked water leads to the appearance of corrosion on the bearing.

  • On the outside (on the back cover of the tank), rusty streams are manifested;
  • The drum walks unevenly;
  • In the squeezing mode, the machine makes a strong hum and whistle.

The problem is eliminated by replacing the part.

Weakening of the pulley

Когда возникает шум с прерывистыми щелчками в бытовой стиральной машине при быстром отжиме — это связано с ослабление шкива. The malfunction is not considered dangerous, but it can be eliminated independently. To do this, open the back cover and tighten the blunder bolt.

Important! A weakened pulley leads to an increase in noise even at low speeds.

Uneven arrangement of counterweights

The counterweights on the automatic machine are needed for balancing and reducing centrifugal force during the rotation of the drum. In their absence or malfunctions, the device is very staggering. The counterweight system is located unevenly for the reasons of the factory marriage or is a consequence of improper transportation. If the element is damaged, it should be replaced.

The counterweight was ill

The confrontation of the counterweight occurs after 5-7 years of intensive operation of the smell. The system is pulled, after which the noise is eliminated.

The seal does not fit the hatch in size

Sometimes the noise in a working washing machine appears when the filled drum rotates. Creaks and whistles, as well as the sound of rubber friction appear immediately, at the first launch of new equipment. The breakdown is not a factory marriage and does not occur due to the fault of the user. Just sealing gum does not fit the size of the hatch door. It should be changed. To save money, using sandpaper, you can flood the edges of the seal.

Important! A malfunction of this nature is found only in budget models.

Damage of the rotation shaft

If the washing machine after some time began to make a lot of noise when washing or spin, it is necessary to pay attention to the fasteners and the promotion system. The broken rotation shaft excludes the tight fit of the drum. The part issues a roar, especially at high speeds.

The shaft is a very strong spare part, but it wears out or deforms during moisture in the inside of the body. Damage is eliminated by replacing the part. It is best to use the services of the master.

Fast avoidance tips

November 7, 2018, 20:47 Oct 28, 2018 16:48 On the offenses Link to the current article

Washing machine for spin: the drum is rattling and the unit vibrates

The small free course of the drum is originally laid by manufacturers, but the permissible backlash does not cause any knock when the device is functioning. Extraneous sounds in the process of washing in most cases are a consequence of the wear of details. To identify these reasons, a consistent check of the main parts of the drum mechanism is performed.

The state of the main elements that ensure the normal rotation of the centrifuge, the correctness of its position, as well as the presence of possible deformations and damage are checked. To certain types of malfunctions may indicate the features of improper functioning of the technique. So, for example, when the shock absorber fails, the drum sags on one side, losing the ability to center things when washing.

Based on the results of technical diagnostics, the corresponding parts are repaired, during which the depreciation device, bearings or bearing crosses can be replaced by similar branded details.

The bearings worn out

If after washing you get wet linen, and the washing machine knocks when spinning, both at large and at average speeds, then the reason is mainly in the failure of the bearings. You can make sure this can be seen by opening the hatch and shaking the drum from yourself to yourself. If there is significantly backlash or a significant gap between the edge of the drum and a tank appears, then this is guaranteed confirmation of the bearing breakdown.

Correction of this defect is a rather time.consuming procedure requiring a certain number of special tools:

  • Set of flat and cross screws.
  • A set of rock keys.
  • Divorce key (preferably).
  • Rubber or wooden hammer. Can be replaced by ordinary, but you have to beat through thick tires.
  • Chisel or cake.
  • Lubrication, recommended lithols.

Dismantling of the body is carried out as follows:

  • The back panel is removed. To do this, unscrew all the screws located around the perimeter. Some models require additionally remove the lid.

Remove the back panel

Disconnect all the wires

  • The belt leading from the electric motor is removed to the drum drive. flywheel.
  • Ten is extracted. To do this, weaken the clamping nut and squeeze slightly inward, freeing the cuff. Then extract, turning at an angle.
  • We fix the flywheel so that the flange does not rotate. It is better to do this not with a screwdriver, but a wooden stick, less risk of piercing the drum.
  • A fixing bolt is twisted. For this, significant efforts must be made. Then you can remove the flywheel.

Disconnect all the wires

  • Next, unscrew the bolts fastening the two parts of the tank and located along its perimeter. This must be done to get the drum without analyzing the entire washing machine. Thus, in their places the first part of the tank remains with shock absorbers and electric motor attached to it. The drum is extracted, and all further actions are carried out with it.

To extract the bearing, the following actions must be performed:

  • The shaft is knocked out by a rubber or wooden hammer. No need to apply too much strength to not deform it.
  • After the drum is removed from the shaft, the oil seal and bearing will become visible in the hole.

Remove the oil seal and bearing

  • The oil seal can be removed by just grunting it with a screwdriver. If this does not come out, then use the chisel. Place the cutting edge between the tank and the seal and do not hit the hammer much with a hammer. After the seal is extracted, the external and internal bearings are removed.
  • The groove must be carefully cleaned of accumulated dirt, lime plaque, etc.P. For this, both chemical detergents and sandpaper are used.

Replacing pre.acquired bearings is performed in the reverse order. The inner ring is first installed in the nest, then the bearings, then the oil seal, previously greased with a lithol.

Install bearings

Before installing the tank on the shaft, it must also be thoroughly cleaned and greased with grease.

Washing machine for spin: the drum is rattling and the unit vibrates

The small free course of the drum is originally laid by manufacturers, but the permissible backlash does not cause any knock when the device is functioning. Extraneous sounds in the process of washing in most cases are a consequence of the wear of details. To identify these reasons, a consistent check of the main parts of the drum mechanism is performed.

The state of the main elements that ensure the normal rotation of the centrifuge, the correctness of its position, as well as the presence of possible deformations and damage are checked. To certain types of malfunctions may indicate the features of improper functioning of the technique. So, for example, when the shock absorber fails, the drum sags on one side, losing the ability to center things when washing.

Based on the results of technical diagnostics, the corresponding parts are repaired, during which the depreciation device, bearings or bearing crosses can be replaced by similar branded details.

Independent repair algorithm

After determining the reason, you can eliminate simple problems.

Machine imbalance

  • Turn off the device from the button and from the network;
  • Wait for the door unlock;
  • Open the drum or drain water in an emergency way;
  • Extract linen and sort it;

Shock absorbers and damper

  • Remove the panel in front or behind the technique;
  • Press the tank with your hand. If he leveled, the springs are working;
  • Inspect the details if the tank is brushed;
  • Find the dampers from below under the tank;

Important! Old models are equipped with shock absorbers to adjust vibration, modern. dampers. The process of replacing spare parts does not differ.

Incorrect installation

  • Checking surface evenness;
  • Alignment of the floor or installation site;
  • Legs adjustment;
  • Placement of anti.vibration stands.

Important! The legs are cut if necessary.

Simple causes of knocking

There may be many reasons for the appearance of extraneous sounds during washing and spinning, and not always a knock speaks of a malfunction of household appliances. First of all, the simple causes of the problem should be eliminated:

  • uneven distribution of things in the drum;
  • improper installation of a washing machine;
  • extraneous object in the internal space.

Incorrect installation

With improper installation, the knock occurs due to the shock of the drum against the wall of the machine. This can lead to a more serious breakdown, which will then require specialists’ intervention. Determining the installation flaws is quite simple: when pressing at high speeds, the machine can not only knock, but also swing strongly, bounce. Make sure you have chosen a flat surface and calibrate the installation with a level. Washing in a correctly installed washing machine will take place much softer and without strong swing.

Unevenly distributed underwear

This problem is characteristic of old models. Modern devices practically do not rattle, of course, if they are working and correctly installed. Good centering is facilitated by the presence of electronics that allows you to more evenly distribute things and prevent imbalance in the drum. Old devices cannot evaluate how well the drum is centered, and whether it has crumpled linen in it. Except occurs in any case, and then the drum can knock on the walls or other elements of the washing machine.

An extraneous element in the internal space of the machine

During the operation of the washing machine, extraneous objects may fall into the internal space of the case. The machine, rotating (especially during spin, at high speeds), creates centrifugal force. Small, but rather heavy objects (coins, buttons) under its action can penetrate inside the machine through holes in the drum or under a sealing elastic band.

You can try to get them through the hatch cuffs. If it does not work, you will have to dismantle the front or rear panel (depends on the model of the machine) to gain access to the interior space.

washing, machine, rattling, technique

Knock due to breakdown of parts

If the machine is installed correctly, there are no extraneous objects in it, and the linen is evenly distributed, then the cause of the appearance of a knock is a breakdown of some part. It can be:

All the problems that concern breakdowns require sending equipment to the service center.

Damage breakdown

With a breakdown of the spring, the drum can lean in one direction. However, in the same way it may look when a shock absorber breakdown. To accurately identify the cause, it is necessary to disassemble the machine. This is done in the service center, and if there is a faulty spring, it is replaced. If you ignore the problem, then when washing, the drum will poorly center linen and constantly swing.

When working, the springs experience heavy loads, so prolonged and intensive operation is the main reason for their breakdown.

Bearing of the bearings

Like any moving details, bearings wear out over time. They go faster when the machine is improperly operating, for example, if it is not set in level and vibrates greatly. The second factor is time. The older the device, the noisier the bearings work.

You can replace them yourself, armed with instructions for a specific machine model.

Shock absorber breakdown

A broken shock absorber has very similar symptoms with a broken spring:

In addition to the shock absorber, the mount may break, or the fastener bolt just get out. Determine why an extraneous sound occurs only after disassembly. It is recommended to conduct diagnostics first by calling the master. After detecting a malfunction, shock absorbers change to new.

Network filter defect

So that cars serve for a long time and safely, they are equipped with network filters. Filters align the jumps in the mains. often such a block is mounted behind the machine under the lid. During operation, he can fly off the mount and rattles from the vibrations of the machine.

To solve this problem, you need to get to the filter, and fasten it into place, making sure that all other connections with it are in order.

Counterweight

The tank itself is quite light and counterweights in its upper and lower part are used for its weight. Thanks to this design, the risk of swing during washing is reduced. Nevertheless, over time, a counterweight can bring you problems: to get sick and knock hard when spinning. Such a problem is corrected quite easily:

If the counterweight was not pulled in time, then he can fly or break. At the same time, the washing machine begins to knock when spinning: at high speeds, the drum begins to touch the walls.

It is worth repairing such a technique as quickly as possible, until the faulty drum has broken all the insides of household appliances.

The causes of the malfunction

Before bringing the equipment to repair or call masters at home, you can conduct initial diagnostics yourself. It is highly likely that you will establish the reason yourself, while saving a certain amount of money that the suit would have to be given.

  • There is something extraneous, small object, detail between the case and the drum;
  • The rotating bearings were very worn out;
  • Bolts dangling for transporting the tank;
  • The axis of rotation of the centrifuge broke, or its fastening was shaken;
  • Problems with a counterweight: poorly fixed or subject to replacement.

In addition to noise, signs of malfunctions with technology can still become:

All these phenomena indicate the wear of important details: bearings, an omentum, shaft. The equipment will function normally only after major repairs.

How to eliminate the breakdown on your own, depending on the cause

You can try to establish the cause of the breakdown yourself, just remember the safety precautions. Before contacting the metal parts of the machine, disconnect it from the outlet.

We delete an extraneous item

Even small drumen holes can fall into small coins, buttons, jewelry. They can fight about a rotating drum, making clicks. You can extract them, armed with something like tweezers. Only first they follow to remove the circular rubber gasket, weaken the heating spiral so that it does not interfere with the detection of a small part. Gently remove the item from the tank and return to Tena the previous position.

Figantous bearings

The bearings in the washing machine experience a tremendous load due to the high speed of rotation of the centrifuge. Over time, even the highest quality ball or roller rings spoil. The breakdown of the bearings can be installed manually, slightly pressing on the axis and rotating the drum alternately, then in one direction or the other. If a characteristic crack is noticeable, the problem with the bearings is evident.

washing, machine, rattling, technique

Especially often, the LG washing machines are buzzing during the expansion of rotational elements.

How to Remove a Stuck item from a Washing Machine Drum

Signs of wear of the node of the node, a piercing bearing can still be the appearance of rust on the linen and seeping water through the bottom of the apparatus. These phenomena indicate the loss of the tightness of the node due to wear of the details. The replacement of this part is made by adjusters, in this case, it is better to entrust the repair to professionals.

Unstable transport bolts are rattling

If you just bought or brought a washing machine from the repair, and it is very noisy during operation, the reason may be the most banal: they forgot to unscrew the bolts that fix the tank inside. In normal mode for better depreciation, it freely balances on the springs. In order to transport the equipment from place to place, it is not recommended to leave the tank in free movement: it is hard to fasten.

When installing, all the fasteners of the inner tank should be removed, and then the characteristic noise will disappear.

Damage of the rotation shaft

Like bearings, even the most durable metal axis can fail over time. Its fastening often breaks, for this it will be necessary to replace the mounting parts or tighten the nuts, while ensuring the tightness of the shaft. A complete replacement of the rotation mechanism may be required, which is also better to entrust the masters.

Damage to the counterweight

For balancing, the tank inside the device is kept on the springs, and it balances its counterweight. Such a system is designed to soften sharp tremors of a spinning centrifuge in order to avoid strokes about the case of the machine body. Inside the apparatus, the counterweight is fixed by ordinary screws that may well unwind over time. It is quite realistic to eliminate such a breakdown without having special knowledge of the repair of household appliances: it is enough to simply tighten these screws.

In conclusion, I would like to add that good owners should always be attentive to home assistants, especially for expensive bulky household appliances. As soon as you heard that the washing machine is buzzing or greatly noisy, carefully examine it for faults. Further operation of the device is fraught with more serious breakdowns, up to a complete refusal. And I really want the automatic machine to serve for a long time.